Huawei RP100 Commissioning Manual

Huawei RP100 Commissioning Manual

Room presence
Hide thumbs Also See for RP100:
Table of Contents

Quick Links

HUAWEI RP100&RP200 Room Presence
V100R001C71
Commissioning Guide
Issue
01
Date
2015-02-12
HUAWEI TECHNOLOGIES CO., LTD.
Table of Contents
loading

Summary of Contents for Huawei RP100

  • Page 1 HUAWEI RP100&RP200 Room Presence V100R001C71 Commissioning Guide Issue Date 2015-02-12 HUAWEI TECHNOLOGIES CO., LTD.
  • Page 2 All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope.
  • Page 3: Preface

    RP systems, whether standard or customized. Intended Audience This document is strictly for the use of Huawei videoconferencing engineers. Anyone who sends this document to customers or competitors must bear full responsibility for all the consequences arising therefrom.
  • Page 4 NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. Change History Issue Date Description 2015-02-12 This issue is the first official release of UCD3.0. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 5: Table Of Contents

    3.2 Installing the Rack................................16 3.2.1 Removing Fasteners from the Packing Case......................17 3.2.2 Wheel Rack................................19 3.2.3 Free Standing Rack..............................20 3.3 Adjusting the Camera Mounting Bracket........................21 3.4 Installing the HD Display.............................22 Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 6 4.2.2 Cabling for the RP Without a TB201 Interface Box....................54 5 TE40 Wi-Fi and Touch Panel Settings..................56 5.1 Wi-Fi Settings................................56 5.2 Touch Panel Settings..............................57 5.2.1 IP Address Settings on the Huawei MediaPad......................57 5.2.2 Installation on the Huawei MediaPad........................60 5.3 Configuration Wizard..............................60 5.3.1 Setting Time and Time Zone Parameters........................60 5.3.2 Setting Conference Parameters..........................61...
  • Page 7 6.10 Configuring the Address Book..........................84 6.10.1 Importing an Address Book.............................84 6.10.2 Exporting an Address Book.............................85 7 Camera Settings...........................87 8 Appendix-Physical Buttons.......................90 8.1 MODE Button................................91 8.2 SELECT Button................................92 Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 8: Product Overview

    HUAWEI RP100&RP200 Room Presence Commissioning Guide 1 Product Overview Product Overview 1.1 RP100-46S 1.1.1 Appearance Figure 1-1 shows the RP100-46S. Figure 1-1 RP100-46S 1.1.2 System Components One VPC600 camera Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 9: Product Features

    Provide a physical button to mute the microphone. Join or initiate conferences at the touch of a button. 1.2 RP200-46S 1.2.1 Appearance Figure 1-2 shows the RP200-46S. Figure 1-2 RP200-46S Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 10: System Components

    Provide a physical button to mute the microphone. Join or initiate conferences at the touch of a button. 1.3 RP100-55S 1.3.1 Appearance Figure 1-3 shows the RP100-55S. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 11: System Components

    Support one presentation input and display the presentation in PiP mode or split-screen mode. Provide a physical button to mute the microphone. Join or initiate conferences at the touch of a button. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 12: Rp200-55S

    One TB201 interface box (optional) 1.4.3 Product Features Be highly integrated, neat, and movable. Support round-table conferences with four to six participants. Provide a camera that supports PTZ. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 13 Support one presentation input and display the presentation in PiP mode or split-screen mode. Provide a physical button to mute the microphone. Join or initiate conferences at the touch of a button. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 14: Deployment Preparation

    Labeling cables Sort and label the cables. Sort and label the cables according to the system connection diagrams. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 15: Tools

    Used to adjust mechanical parts of 6 mm (1 pc) the display. Diagonal pliers Used to cut cables and cable ties. Measuring tape Length: ≥ 7.5 m Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 16: Powering Devices On

    ON so that the codec automatically starts after it is powered on. Step 3 Log in to the codec web interface. By default, the user name and password are admin and Change_Me, respectively. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 17 Step 4 Choose System Settings > Network > IP and set the parameters. The codec supports IPv4 and IPv6. Choose one based on the actual network environment. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 18 Hub network port Disable Default value. mode Local IP PPPoE Disable Recommended value. address IPv4 Connection type Static IP Recommended value. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 19 Set this parameter based on the actual network environment. DNS server address 1 Recommended value. DNS server address 2 Recommended value. DNS server address 3 Recommended value. ----End Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 20: Installation

    Table 3-1 lists HUAWEI RP C04 series telepresence systems. This document uses the RP100-46S and RP200-46S as examples. The RP100-46S comes with one HD display as standard. The RP200-46S comes with two HD displays as standard. "46" indicates the size of an HD display in inches.
  • Page 21 Unless otherwise specified, the left and right sides mentioned in this document are the directions as you face the HD display. Figure 3-2 Figure 3-3 show the device positioning for RP100 and RP200 series telepresence systems. Figure 3-2 RP100 telepresence system Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright ©...
  • Page 22 HUAWEI RP100&RP200 Room Presence Commissioning Guide 3 Installation Figure 3-3 RP200 telepresence system Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 23: Installation Tools

    There are two types of racks: wheel and free standing. The wheel rack is delivered for all models. This document uses the wheel rack as an example. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 24: Removing Fasteners From The Packing Case

    Step 4 Unpack the carton. Then, use an H6 Allen wrench to remove the four M8 hex socket screws from the top of the fasteners on the left and right of the packing case, as shown in Figure 3-5. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 25 Step 5 Take out the rack and place it in an appropriate position in the conference room. For details about where you can place the rack, see the Standard Document to the Decoration of Huawei RP Series Telepresence Conference Room. DANGER The rack is heavy.
  • Page 26: Wheel Rack

    If the wheel rack is to be used, you do not need to make any preparation for the installation. NOTICE The wheels are locked before delivery. To move the rack, toggle the wheel lock upward, as shown in Figure 3-7. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 27: Free Standing Rack

    Figure 3-7 Toggling the pulley lock 3.2.3 Free Standing Rack Step 1 Loosen the four wheels from the rack. Step 2 Remove the wheels using an open-end wrench. Figure 3-8 Wheel ----End Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 28: Adjusting The Camera Mounting Bracket

    If you are using a 55-inch HD display, align the holes silk-screened with 1/2/T and 2/T with the rack fixing holes. Figure 3-9 Adjusting the rack Step 2 Tighten the screws using a Phillips screwdriver to secure the camera mounting bracket. ----End Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 29: Installing The Hd Display

    Four frames, as shown in Figure 3-10. RP100) Dual-screen HD display support (for the Left and right HD display supports and RP200) bridging pieces, as shown in Figure 3-11. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 30: Adjusting The Hd Display Support

    3.4.2 Adjusting the HD Display Support NOTICE l If you are using an RP100-46S or RP100-55S, you do not need to adjust its support. l When adjusting the support, only partially tighten the screws. Tighten the screws after the HD display is fully installed.
  • Page 31 If you are using an RP200-55S, align the holes on the horizontal bars with the holes silk- screened with 2 on the L and R bars. Figure 3-12 Adjusting the HD display support ----End Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 32: Installing The Rp100 Hd Display

    Commissioning Guide 3 Installation 3.4.3 Installing the RP100 HD Display NOTICE Before installing the RP100 HD display, remove the cables temporarily from the locations marked with a red circle shown in Figure 3-13. Keep the cables for later use. Figure 3-13 Locations from which cables must be removed temporarily Step 1 Lay a soft cushion on the ground.
  • Page 33 Step 6 Attach the HD display to the rack by fastening the screws on the rear of the HD display into the corresponding holes on the rack, as shown in Figure 3-15. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 34 3 Installation Figure 3-15 Attaching the HD display to the rack Step 7 Connect the power and other cables to the HD display. For details about cable connections, see the HUAWEI RP V100R001C04 Series Telepresence System Connection Diagrams. ----End If the HD display tilts, remove the HD display from the rack, and place it on the cushion with its screen facing down.
  • Page 35: Installing The Rp200 Hd Displays

    Figure 3-17 Locations from which cables must be removed temporarily Step 1 Lay a soft cushion on the ground. Place the two HD displays on the cushion in the same orientation, with their screens facing down. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 36 Fasten M3 x 12 recessed pan head screws in the holes where the screws were removed to securely attach the connecting plates, as shown in Figure 3-20 Figure 3-21. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 37 HUAWEI RP100&RP200 Room Presence Commissioning Guide 3 Installation Figure 3-20 Installing the connecting plates for 46-inch HD displays Figure 3-21 Installing the connecting plates for 55-inch HD displays Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 38 Step 7 Fasten the eight M6 x 20 hex socket screws using an H5 Allen wrench to securely attach the supports to the rear of the HD displays. Step 8 Install the mounting components on the connecting bars, as shown in Figure 3-24. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 39 Step 10 Align the holes on the connecting bar with the holes on the horizontal bars of the supports. Fasten the screws and washers, as shown in Figure 3-26. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 40 Step 12 Ensure that the L and R bars are vertical to the horizontal bars; otherwise, move the horizontal bars to adjust. Step 13 Fasten the eight hex socket screws at the joints of supports using an H5 Allen wrench. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 41: Installing The Te40 Codec

    Figure 3-28. Figure 3-28 Mounting the HD displays Step 16 Connect cables to the HD display. For details about cable connections, see the HUAWEI RP V100R001C04 Series Telepresence System Connection Diagrams. ----End 3.5 Installing the TE40 Codec Step 1 Remove the pad from the rack top using a Phillips screwdriver, as shown in Figure 3-29.
  • Page 42 Step 3 Connect the composite cable to the TE40 and use a flat-head screwdriver to fasten the screws, as shown in Figure 3-31. For details about cable connections, see the HUAWEI RP V100R001C04 Series Telepresence System Connection Diagrams. Issue 01 (2015-02-12) Huawei Proprietary and Confidential...
  • Page 43 Align the screws protruding from the pad with the holes at the bottom of the TE40, as shown in step 1 in Figure 3-32. Fasten the recessed pan head screws, as shown in step 2 in Figure 3-32. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 44 To remove the HD display, loosen the camera pad, push the TE40 to the back, and then take off the HD display. Step 5 Keep the camera lens facing the front and install the TE40 on the rack top, as shown in Figure 3-33. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 45 Figure 3-33 Installing the TE40 codec Step 6 Connect cables to the TE40. For details about cable connections, see the HUAWEI RP V100R001C04 Series Telepresence System Connection Diagrams. Step 7 Align the cable clamp with the holes on the pad and fasten the screws, as shown in Figure 3-34.
  • Page 46 3-35. Figure 3-35 Strapping cables Step 9 Install the decorative component behind the camera on the rack and clip it in place, as shown in Figure 3-36. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 47 Figure 3-37 Tightening the decorative component behind the camera Step 11 Fasten the TE40 composite cable. Remove the screws on the two sides of the rack, as shown in Figure 3-38. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 48 HUAWEI RP100&RP200 Room Presence Commissioning Guide 3 Installation Figure 3-38 Removing rack screws Remove the rack cover, as shown in Figure 3-39. Figure 3-39 Removing the rack cover Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 49: Installing Equipment In The Rack

    3.6.1 Location of the 5-Port PDU The 5-port power distribution unit (PDU) is embedded in the rack, as shown in Figure 3-41. You do not need to install it. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 50: Installing The Camera's Power Adapter

    Figure 3-41 5-port PDU 3.6.2 Installing the Camera's Power Adapter Insert the camera's power adapter into the bracket and mount the bracket onto the rack, as shown Figure 3-42. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 51: Troubleshooting

    Use the M10 open-ended wrench to adjust the wheels. The wheel height rises when you turn the wrench counterclockwise and lowers when you turn the wrench clockwise, as shown in Figure 3-43. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 52: Tilted Hd Display

    Loosen the screws and adjust the horizontal bars. For example, if the HD display tilts to the left when you are facing the screen, drag the right side of the horizontal bars downward, as shown in Figure 3-44. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 53: Noise From The Power Adapter Bracket

    Move the power adapter bracket to the rightmost corner of the rack and attach a viscose cable tie to the left side of the power adapter bracket, as shown in Figure 3-45. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 54 HUAWEI RP100&RP200 Room Presence Commissioning Guide 3 Installation Figure 3-45 Fastening the camera's power adapter bracket Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 55: Cable Connection

    One English label and one Chinese label are attached at one end of the cable. l The two labels touch each other. l The Chinese label is closer to the cable connector, about 10 cm away from the connector. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 56: Cable Connectors

    Figure 4-3. Figure 4-3 Cable with a ferrite bead ----End 4.1.2 Cable Connectors Table 4-1 Cable connectors Connector Remarks DVI-D DVI-I Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 57 HUAWEI RP100&RP200 Room Presence Commissioning Guide 4 Cable Connection Connector Remarks VISCA RJ45 VISCA RP200 Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 58 HUAWEI RP100&RP200 Room Presence Commissioning Guide 4 Cable Connection Connector Remarks HDMI DVI-D DVI-I GB plug Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 59: Cabling

    VGA cable HDMI cable Audio XLR cable RCA cable 3.5 mm audio cable Microphone cable Network RJ45-RJ45 cable Power supply C13-C14 cable Chinese-standard power cable C14-C7 cable Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 60: Cabling For The Rp With A Tb201 Interface Box

    HUAWEI RP100&RP200 Room Presence Commissioning Guide 4 Cable Connection 4.2.1 Cabling for the RP with a TB201 Interface Box Video Cable Connection Audio, Network, and Control Cable Connection Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 61: Cabling For The Rp Without A Tb201 Interface Box

    HUAWEI RP100&RP200 Room Presence Commissioning Guide 4 Cable Connection Power Cable Connection 4.2.2 Cabling for the RP Without a TB201 Interface Box Video Cable Connection Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 62 HUAWEI RP100&RP200 Room Presence Commissioning Guide 4 Cable Connection Audio, Network, and Control Cable Connection Power Cable Connection Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 63: Te40 Wi-Fi And Touch Panel Settings

    5-1. Figure 5-1 Setting Wi-Fi parameters Table 5-1 Wi-Fi parameters Parameter Value Remarks Wi-Fi Client Disable Fixed value. Wi-Fi Hotspot Enable Fixed value. SSID Number Recommended value. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 64: Touch Panel Settings

    None ----End 5.2 Touch Panel Settings 5.2.1 IP Address Settings on the Huawei MediaPad Step 1 Touch the clock area in the lower right corner of the touch panel. Figure 5-2 Touch panel clock area Step 2 In the displayed dialog box, tap to display the settings screen.
  • Page 65 Step 4 In the displayed Wi-Fi list, select the RP network. In the displayed dialog box, set the password to 22rRP100200, select Show advanced options, and set the parameters according to Table 5-2. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 66 172.16.21.64 Recommended value; can be changed based on the network environment onsite. DNS 1 8.8.8.8 Recommended value; can be changed based on the network environment onsite. ----End Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 67: Installation On The Huawei Mediapad

    This section is applicable when the system comes with a touch panel. For details about how to configure the system with a remote control, see chapter 6. l After you install and log in to the Huawei Telepresence application, a configuration wizard screen is displayed. Follow the steps in this section to complete the configuration.
  • Page 68: Setting Conference Parameters

    Table 5-4 Conference parameters Parameter Value Remarks Network recording Set this parameter based on the site requirements. Site name Shenzhen777 Set this parameter based on the site requirements. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 69: Setting Gk And Sip Parameters

    None Set this parameter based on the site requirements. Presentation display Set this parameter based on the product type. l RP100 without a user- purchased presentation display: off l RP100 with a user- purchased presentation display or projector: on l RP200: on 5.3.3 Setting GK and SIP Parameters...
  • Page 70 Set this parameter based on the site requirements. User name Set this parameter based on the site requirements. Password Set this parameter based on the site requirements. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 71: Saving The Settings

    Figure 5-9 Saving the settings 5.3.5 Follow-up Procedure After you complete the configuration wizard, you may need to set other parameters. For details, see chapter 6 "System Settings." Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 72: System Settings

    HUAWEI RP100&RP200 Room Presence Commissioning Guide 6 System Settings System Settings If you fail to configure the touch panel using the configuration wizard, follow the steps in this chapter. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 73: Logging In To The Te40 Web Interface

    Figure 6-2 TE40 settings page 6.2 Setting the General Parameters Choose System Settings > General and set the parameters according to Table 6-1, Figure 6-4, and Figure 6-5. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 74 This parameter is available when NTP is enabled. Set it based on the actual condition. System time 2013/5/2 0:32:0 Set it based on the actual condition. Figure 6-4 Power management Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 75 This user can configure the system settings for the codec. Administrator password Change_Me Set it based on the actual condition. Confirm password Change_Me Set it based on the actual condition. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 76: Setting The Site Name

    User password Change_Me Default value. Confirm password Change_Me Default value. 6.3 Setting the Site Name Choose System Settings > Display and set the parameters according to Table 6-4. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 77: Icon

    Display time and zone Disable Default value. Horizontal offset Default value. Vertical offset Default value. 6.4 Icon Choose System Settings > Icon, and set the parameters according to Figure 6-7. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 78: Configuring Input And Output

    Click Video Input and set the parameters according to Table 6-5. Figure 6-8 Video input settings Table 6-5 Video input settings Parameter Value Remarks Common Camera Settings Remote control Allow Recommended value. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 79: Configuring Video Output

    6.5.2 Configuring Video Output Click Video Output and set the parameters according to Table 6-6. Not the difference when configuring the RP100 or RP200. Figure 6-9 Video output settings Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 80 Presentation output interface Disable/Enable Set it to Disable for the RP100 with no presentation screen. Set it to Enable for the RP100 or RP200 with a presentation screen. Auxiliary output part 2 HDMI OUT Default value. 1 HDMI UT HD...
  • Page 81: Setting Conference Parameters

    None Default call bandwidth Default call bandwidth 1920kbps Recommended value. Maximum incoming call 8Mbps Default value. bandwidth HELPDESK number None Default value. PSTN Call Enable Default value Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 82: Configuring Advanced Settings

    Choose System Settings > Conference > Advanced Settings and set the parameters according Table 6-8. Figure 6-11 Advanced conference parameters Table 6-8 Advance conference parameter settings Parameter Value Remarks Audio protocol Auto Default value. Video protocol Auto Recommended value. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 83: Setting Network Parameters

    Choose System Settings > Network and set the parameters according to Table 6-9, Table 6-10 Table 6-11. 6.7.1 Setting GK and SIP Parameters Choose System Settings > Network > H.323 and set the parameters. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 84 Enable Set it to Enable when a Huawei GK is used. HTTP mode Enable Recommended value. Set it to Enable if the service layer supports HTTPS calls. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 85 Proxy server address Set it based on the actual condition. Site number 07550003 Set it based on the actual condition. User name Set it based on the actual condition. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 86: Setting Network Address Book Parameters

    FTPS based on the status of the network address book on the service layer. Figure 6-14 Network Address Book If the current network support LADP address books, configure the LDAP server settings based on the actual condition. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 87 Set it based on the actual condition. Synchronize automatically Enable Set it based on the actual condition. Automatic update interval 24 h Set it based on the actual condition. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 88: Configuring Security Settings

    Figure 6-16 SSH/Telnet, GUI, and Upgrade password Table 6-12 Security settings Parameter Default Value Remarks Do not allow Recommended value. Set it to Allow when commissioning the system. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 89: Device Control

    Device control settings include parameters for audio and video control. 6.9.1 Setting Video Control Parameters Choose Device Control > Video Control and set the parameters according to Table 6-13. Figure 6-17 Video input and output sources Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 90: Setting Audio Control Parameters

    Choose Device Control > Audio Control and set the parameters according to Table 6-14. Figure 6-18 Audio input and output and sound effect parameters Table 6-14 Audio control settings Parameter Default Value Remarks Audio Input Unmute Recommended value. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 91: Configuring The Address Book

    6.10.1 Importing an Address Book Step 1 Choose Address Book > Address Book to display the Address Book settings screen, as shown Figure 6-19. Figure 6-19 Address Book Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 92: Exporting An Address Book

    Step 4 Click OK. Step 5 Choose Trusted sites > Sites to display the Trusted sites dialog box. Enter the codec IP address and click Add. Step 6 Click OK. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 93 6 System Settings Step 7 Click the Privacy tab. Then set the slider label to Medium. Step 8 Click OK to save the settings. Figure 6-22 Clicking OK ----End Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 94: Camera Settings

    If the actual environment is tough and the camera brightness and color fail to meet requirements, set 2A mode to Manual and adjust the other parameter settings for a satisfying effect. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 95 Adjust the image brightness by setting Brightness gain and Iris. Adjust the image color by setting Red gain and Blue gain. Step 4 Keep the default value Standard for Picture mode. Figure 7-4 Picture mode Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 96 If the image noise is high, set Noise reduction to Low. Do not set it to High; otherwise, ghost images may appear. Figure 7-5 Noise reduction ----End Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 97: Appendix-Physical Buttons

    HUAWEI RP100&RP200 Room Presence Commissioning Guide 8 Appendix-Physical Buttons Appendix-Physical Buttons The TE40 provides two physical buttons: MODE and SELECT. Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 98: Mode Button

    When the TE40 operates properly, press and holds the MODE button for about 10 seconds to restore the default settings and restarts the TE40. After the restoration, the default TE40 IP address is 192.168.1.1. Figure 8-1 Restore Default dialog box Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 99: Select Button

    VGA mode, the follow information may be displayed on the remote control UI: YPRPB 720P 50 -------------------------------VGA Disable YPRPB 1080P 24/25/30/50 ----------------------VGA Disable VGA 800*600/1024*768/1280*1024 ----------------YPRPB Disable Issue 01 (2015-02-12) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

This manual is also suitable for:

Rp200Rp100-46sRp100-55sRp200-46sRp200-55s

Table of Contents