Symbols and Safety precautions | 3 Symbols and Safety precautions Explanation of symbols The safety instructions included in the text are highlighted with a warning triangle and marked in grey. The symbols identify the degree of danger which might occur, if the recommendations provided are not followed.
4 | Symbols and Safety precautions Maintenance Safety instructions B Inspection of the electrical connections and of the heating element and thermostat set by a B In addition to the following instructions, specialised technician is strongly reading of the safety precautions provided in recommended, at maximum intervals of 2 the thermosyphon installation instructions is years.
Information on accessories | 5 Information on accessories Use according to directives This device complies with the provisions defined in the European directives 2006/95/EC and 2004/108/EC Equipment supplied Figure 1, page 10: 1. Heating element with ring sealer 2. Thermostat 3.
6 | Information on accessories Technical Information Technical characteristics Type of tank litre Rated output Watt 3000 Warm-up time (15 °C - 50 °C) 3h48m Voltage 230/240 Frequency 12,5 (AU) Electric current 13,0 (NZ) Section of electric cable to be installed Level of protection Type of protection IPX4...
Installation | 7 Installation B Remove the thermostat from the heating CAUTION: element ( Fig. 4). The installation, the electrical B Screw the heating element in by turning in a connections, as well as the first clockwise direction ( Fig. 5). start-up are operations to be carried out exclusively by Before installing the element it may...
8 | Installation B Adjust the thermostat to the desired Energy saving temperature at which the heating element is switched off ( Fig. 9, position 2). In order to minimize the consumption of electrical energy, the user may: The thermostat must be set to using the breaker, manually, switch the power •...
Maintenance | 9 Maintenance Inspection of the electrical connections and of the heating element and thermostat set by a specialised technician is strongly recommended, at maximum intervals of 2 years. Ensure that the electrical capacity of the house is sufficient for the correct operation of the heating element together with the other appliances already in use.