Husqvarna BG 245E Operator's Manual
  1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Trowels
  5. BG 245E
  6. Operator's manual
Husqvarna BG 245E Operator's Manual

Husqvarna BG 245E Operator's Manual

Hide thumbs

Quick Links

BG 245E
EN
Operator's manual
2-17
loading

Related Manuals for Husqvarna BG 245E

Summary of Contents for Husqvarna BG 245E

  • Page 1 BG 245E Operator's manual 2-17...

  • Page 2: Table Of Contents

    Contents Introduction..............2 Troubleshooting............13 Safety................4 Transportation, storage and disposal......13 Operation................ 7 Technical data.............. 15 Maintenance..............9 EC Declaration of Conformity........17 Introduction Product description The product can be used with the optional accessory floating disc. This product is a pedestrian-controlled trowel, which is a Intended use concrete smoothing machine.
  • Page 3 Symbols on the product Rating plate WARNING: This product can be dangerous and cause serious injury or death to the operator or others. Be careful and use the product correctly. Read the manual carefully and make sure that you understand the instructions before you use the product.

  • Page 4: Safety

    • the product is repaired with parts that are not from • the product has an accessory that is not from the the manufacturer or not approved by the manufacturer or not approved by the manufacturer. manufacturer. • the product is not repaired at an approved service center or by an approved authority.
  • Page 5 • Make sure that you know how to stop the product increase or become permanent. If these or other quickly in an emergency. symptoms occur, get medical aid: • The operator must have the physical strength that is • Numbness, loss of feeling, tingling, pricking, necessary to operate the product safely.
  • Page 6 Do a check of the safety devices regularly. If the Accessories and spare parts that are not approved safety devices are defective, speak to your by the manufacturer, can cause serious injury or Husqvarna service agent. death. • Replace damaged, worn or broken parts.

  • Page 7: Operation

    • Only do the maintenance as given in this operator's • Let an approved service agent do servicing on the manual. Let an approved service agent do all other product regularly. servicing. • After maintenance, do a check of the vibration level in the product.
  • Page 8 To do the troweling operation • To move the product forward, push the handles forward. To start the product on 1. Start the motor. Refer to page 7 . 2. Turn the blade adjustment knob until there is tension in the cable. 3.

  • Page 9: Maintenance

    Maintenance Introduction For spare parts, speak to your Husqvarna dealer or service agent. WARNING: Read and understand the safety Maintenance schedule chapter before you do maintenance on the product.
  • Page 10 To do a check of the V-belt • Tilt the product forward until it is stable on the support frame. WARNING: Do not operate the product without the V-belt cover installed. 1. Stop the motor and disconnect the power cord from the power source.
  • Page 11 3. Pull the blade shafts from the hub. 2. Remove the blade assembly. Use a puller if the blade assembly is not easy to remove. 4. Replace damaged blade shafts. 5. Clean the contact surfaces on the blade shafts and the hub.
  • Page 12 To lubricate the 2. Remove the screws (A) and replace the blades (B). 3. Lubricate the blade shafts. Refer to blade shafts on page 11 . 1132 - 001 - 06.04.2020...

  • Page 13: Troubleshooting

    Troubleshooting Problem Cause Solution The product does not No power supply. Examine the power cord and the fuse. Re- start. place damaged parts. Electromagnetic contactor is not in operation. Make sure that the magnetic sensor is cor- rectly connected and that adjacent parts are not damaged.
  • Page 14 Obey the local recycling requirements and applicable regulations. • When the product no longer is used, send it to a Husqvarna dealer or discard it at a recycling location. WARNING: Do not use metal hooks, chains or other lifting equipment with rough edges that can cause damage to the lifting eye.

  • Page 15: Technical Data

    Technical data Technical data Operation weight, EN500, kg/lb 60/132 Motor type 230V-1-50/60 Hz Motor power, kW Blade speed, rpm Rated current, A Type of handle Short, foldable Type of blade angle adjustment Twist pitch Type of blade arms Bolt on Grease, shaft for blade adjustments Shell Gadus S2 or equivalent Gearbox oil...
  • Page 16 Noise and vibration declaration values are not suitable for use in risk assessments and values measured in individual work places may be statement higher. The actual exposure values and risk of harm experienced by an individual user are unique and These declared values were obtained by laboratory type depend upon the way the user works, in what material testing in accordance with the stated directive or...

  • Page 17: Ec Declaration Of Conformity

    EC Declaration of Conformity EC Declaration of Conformity We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare on our sole responsibility that the product: Description Concrete Smoothing Machine, Trowel Brand Husqvarna Type/Model BG 245E Identification Serial numbers dating from 2019 and onwards...
  • Page 18 1132 - 001 - 06.04.2020...
  • Page 19 1132 - 001 - 06.04.2020...
  • Page 20 www.husqvarnacp.com Original instructions 1140654-26 2020-04-17...