Toshiba IK-WB02A Quick Start Manual

Network connection

Hide thumbs Also See for IK-WB02A:

Quick Start Guide for Network connection

The following software must be downloaded and installed

before installing the IK-WB02A:

• Internet Explorer

http://www.microsoft.com/windows/ie

• Toshiba Camera Finder software

The software is included on the supplied mini CD-ROM.

1) Connect the IK-WB02A to your network using a Cat5/

Ethernet cable BEFORE powering on your camera.

Repeat this step for any additional cameras.

Obtained IP address

depends on DHCP

Static IP address

192.168.0.30

Ethernet cable ( straight-through cable)

2) Power on your devices in the following order: cable or

DSL modem, router or hub, PCs.

3) Power on the IK-WB02A.

STOP!

THANK YOU

Version 6.0 or later

Network camera

Internet

Hub

Ethernet cable (straight-through cable)

Personal computer

Page 1: Thank You
• Toshiba Camera Finder software The software is included on the supplied mini CD-ROM. 1) Connect the IK-WB02A to your network using a Cat5/ Ethernet cable BEFORE powering on your camera. Repeat this step for any additional cameras. Obtained IP address...
Page 2 • Internet Explorer http://www.microsoft.com/windows/ie • Toshiba Camera Finder software The software is included on the supplied mini CD-ROM. 1) Connect the IK-WB02A to your PC using a Cat5 Crossover cable BEFORE powering on your camera. Static IP address 192.168.0.30 Version 6.0 or later...
Page 3 If you do not have a static IP address for your Internet connection, Toshiba offers DDNS service that will allow you to have an Internet address for your camera. 1) Register for Toshiba's DDNS service by clicking on the link IK-WB02A settings under Configuration > DDNS Settings.
Page 4 Quick Start Guide (Cont.) 2) Enter “root” in the Current login ID field and “ikwb” in the Current Password field. 3) Enter a new login ID in the New login ID field and a new password in the New Password field and New Password (Confirm) field.