Panasonic AJ-PX270 Settings Manual
P2 camera - tvu networks direct connection live streaming
Hide thumbs
Also See for AJ-PX270:
- Operating instructions manual (217 pages) ,
- Specifications (12 pages) ,
- Quick manual (2 pages)
Related Manuals for Panasonic AJ-PX270
Summary of Contents for Panasonic AJ-PX270
- Page 1 P2 Camera - TVU networks Direct connection live streaming Setting Guide Panasonic Corporation Media & Entertainment Business Division Jan.22, 2019...
- Page 2 40.73-00-0.00 AJ-PX800 37.50-00-0.00 AJ-PX380 39.96-00-0.00 AJ-PG50 33.89-00-0.00 Please refer to Panasonic web site regarding P2 products version and upgrade. https://eww.pass.panasonic.co.jp/p2ui/guest/TopLogin.do?lang=en&category=pav TVU networks receiver product number Version VS3500 TX3200 Please consult TVU networks about receiver product version and the details of network settings such as TCP, UDP port.
- Page 3 (3) Copy file to SD card by clicking “Export” button. 3. Connect wired LAN or Wi-Fi/4G/LTE device to camera. Note: Please refer to the following Panasonic web site about confirmed 4G/LTE USB modems and Wi-Fi wireless modules for P2 products. https://pro-av.panasonic.net/en/p2hd.html [ 2/6 ]...
-
Page 4: Menu Settings
4. Menu settings 4-1. Network settings Select network from the menu according to the actual connection. [MENU]-[NETWORK SETUP]-[NETWORK SEL]="WLAN" , "4GLTE" or "LAN" Note: - P2 camera might restart when changing menu depending on the setting. - You can confirm the network connection status on the menu: [MENU]-[NETWORK SETUP]-[NETWORK TOOLS]-[STATUS DISPLAY] 4-2. - Page 5 4-3. Streaming settings [MENU]-[RECORDING SETUP]-[DUAL CODEC SETTINGS]-[CODEC USAGE]="STREAMING" [MENU]-[NETWORK SETUP]-[STREAMING SETTINGS]-[START TRIGGER]="CAMERA" [MENU]-[NETWORK SETUP]-[STREAMING SETTINGS]-[SETTING DATA]="SD CARD" [MENU]-[RECORDING SETUP]-[DUAL CODEC SETTINGS]-[QoS MAX RATE] [MENU]-[RECORDING SETUP]-[DUAL CODEC SETTINGS]-[QoS MIN RATE] Note: The setting from TVU receiver is prioritized for QoS MAX RATE. You cannot set QoS MAX RATE lower than QoS MIN RATE.
- Page 6 A P2 icon will appear on the TVU Receiver GUI once pairing is complete. NOTE: P2 devices do not provide an index picture to the TVU GUI. TVU Receiver configuration should be modified to receive Panasonic streaming. This should be remotely done by TVU Support.
- Page 7 Note: TVU Receiver is able to set maximum bit rate for AVCG (QoS) and SHQ (QoS) mode of STREAMING MODE on P2 camera/recorder. - Available maximum bit rate to be set is on QoS MAX RATE menu list. - If TVU Receiver setting bit rate is different from the list above, the bit rate is cut down to the nearest setting value of the list.