Fujitsu RAID 0/1 SAS based on LSI MegaRAID User Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Controller
  5. RAID 0/1 SAS based on LSI MegaRAID
  6. User manual

Fujitsu RAID 0/1 SAS based on LSI MegaRAID User Manual

Modular raid controllers
Hide thumbs
Table of Contents

Quick Links

User Guide - English
Modular RAID Controllers
"RAID 0/1 SAS based on LSI MegaRAID"
"RAID 5/6 SAS based on LSI MegaRAID"
"RAID Ctrl SAS 6G 0/1 (D2607)"
"RAID Ctrl SAS 6G 5/6 512MB (D2616)"
"PY SAS RAID Mezz Card 6Gb (D3016)"
"RAID Ctrl SAS 6G 1GB (D3116)"
"PY SAS RAID HDD Module (D2816)"
"PY SAS RAID HDD Module w/o Cache (D2837)"
"PRAID EP400i / EP420i"
"PRAID EM400i"
"PRAID CM400i"
"PRAID CP400i"
"PRAID EP420e"
"PRAID EP440i"
January 2018
Table of Contents
loading

Related Manuals for Fujitsu RAID 0/1 SAS based on LSI MegaRAID

Summary of Contents for Fujitsu RAID 0/1 SAS based on LSI MegaRAID

  • Page 1 User Guide - English Modular RAID Controllers "RAID 0/1 SAS based on LSI MegaRAID" "RAID 5/6 SAS based on LSI MegaRAID" "RAID Ctrl SAS 6G 0/1 (D2607)" "RAID Ctrl SAS 6G 5/6 512MB (D2616)" "PY SAS RAID Mezz Card 6Gb (D3016)"...
  • Page 2 DIN EN ISO 9001:2008. cognitas. Gesellschaft für Technik-Dokumentation mbH www.cognitas.de Copyright and Trademarks Copyright 2018 FUJITSU LIMITED All rights reserved. Delivery subject to availability; right of technical modifications reserved. All hardware and software names used are trademarks of their respective manufacturers.

  • Page 3: Table Of Contents

    Modular RAID 3Gb/s (SAS1.0) ....15 RAID controller "RAID 0/1 SAS based on LSI MegaRAID (D2507)" ......15 3.1.1...
  • Page 4 Content 4.1.3 Connectors and indicators ....33 4.1.4 Installation ......34 RAID Controller "RAID Ctrl SAS 6G 5/6 512 MB (D2616)"...
  • Page 5 Content SAS Controller "PY SAS RAID HDD Module w/o Cache (D2837)" ......70 4.6.1 Features .
  • Page 6 Content RAID Controller "PRAID EP440i" ....107 5.6.1 Features ......108 5.6.2 Controller versions .

  • Page 7: Introduction

    Internet at: http://ts.fujitsu.com For Japan please use the URL: http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/ Modular RAID Controllers...

  • Page 8: Notational Conventions

    Introduction Notational conventions The meanings of the symbols and fonts used in this manual are as follows: indicates commands, menu items, file and path italics names or software programs "quotation marks" indicates names and terms that are being emphasized indicates an operation that is to be performed Ê...

  • Page 9: Important Information

    Important information In this chapter you will find essential information regarding safety when working with the board. Please read the instructions carefully if you want to install/remove a board. CAUTION! Observe the safety notes in the Operating Manual of your system unit. Safety instructions CAUTION! The actions described in these instructions should only be performed...
  • Page 10 Important information For the LAN wiring, the requirements according to standards ● EN 50173 and EN 50174-1/2 apply. The minimum requirement is the use of a protected LAN line of category 5 for 10/100 Mbit/s Ethernet, and/or of category 5e for Gigabit Ethernet. The requirements of specification ISO/IEC 11801 must be observed.
  • Page 11 Important information Modules with Electrostatic-Sensitive Devices Modules with electrostatic-sensitive devices are identified by the following sticker: Figure 1: ESD label When you handle components fitted with ESDs, you must always observe the following points: Switch off the system and remove the power plugs from the power outlets ●...

  • Page 12: Environmental Protection

    Important information Environmental protection Environmentally-friendly product design and development This product has been designed in accordance with the Fujitsu standard for "environmentally friendly product design and development". This means that key factors such as durability, selection and labeling of materials, emissions, packaging, ease of dismantling and recycling have been taken into account.
  • Page 13 Further information can be found at: http://ts.fujitsu.com/recycling Details regarding the return and recycling of devices and consumables within Europe can also be found in the "Returning used devices" manual, via your local Fujitsu branch, or at: http://ts.fujitsu.com/recycling Modular RAID Controllers...
  • Page 14 Important information Modular RAID Controllers...

  • Page 15: Modular Raid 3Gb/S (Sas1.0)

    The RAID stack is based on LSI ® MegaRAID and offers powerful data throughput, extensive fault-tolerance and easy-to-use management. Figure 2: "RAID 0/1 SAS based on LSI MegaRAID" controllers 1068 (A) and 1064 (B) Modular RAID Controllers...

  • Page 16: Features

    Modular RAID 3Gb/s (SAS1.0) 3.1.1 Features 3.3 V PCIe (PCI Express) add-in card ● 4 / 8-Port SAS / SATA ● PCIe Interface x4 electrical, x8 mechanical ● One / two Mini 4x SFF-8087 Multilane Connectors ● 3.0 Gbit/s and 1.5 Gbit/s link rates for both SAS and SATA ●...

  • Page 17: Connectors

    Modular RAID 3Gb/s (SAS1.0) 3.1.3 Connectors The following figure shows the location of the connectors on the controllers. HDD LED connector SAS cable connector(s) Connector Type Description SAS MLC1 x4 SAS, ports 0 - 3 SFF 8087 Mini SAS connector for SAS IO cable to backplane and HDDs (hard disk drives) SAS MLC2...

  • Page 18: Installation

    Step 1 Unpack the controller Unpack the new controller in a static-free environment. Remove it from the anti-static bag and inspect it for damage. If the controller appears to be damaged, contact the Fujitsu support service. Step 2 Prepare the server Turn off the server and remove the cover from the chassis.
  • Page 19 Modular RAID 3Gb/s (SAS1.0) Step 3 Install the new SAS RAID controller Insert the controller in a suitable PCIe slot on the system board, as shown in the figure above (see your system board guide for information on the PCIe slot). Press down gently but firmly to ensure the card is properly seated in the slot.
  • Page 20 The ServerView Suite DVD 1 includes drivers for the supported operating systems, along with documentation. You can view the supported operating systems and download the latest drivers for RAID adapters on the website at: http://ts.fujitsu.com/support/ For Japan please use the URL: http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/ Modular RAID Controllers...

  • Page 21: Raid Controller "Raid 5/6 Sas Based On Lsi Megaraid (D2516)

    Modular RAID 3Gb/s (SAS1.0) RAID controller "RAID 5/6 SAS based on LSI MegaRAID (D2516)" ATTENTION! Make sure you observe the safety notes in chapter "Important information" on page The RAID controller "RAID 5/6 SAS based on LSI MegaRAID" is designed to drive the server's internal disk drives.

  • Page 22: Controller Versions

    Modular RAID 3Gb/s (SAS1.0) Optionally secured with BBU ● Offers advanced MegaRAID functionality to integrated LSI SAS ● 3.3 V PCIe add-in card ● 4-lane 2.5 Gbit PCIe host bus ● 8 SAS/SATA ports ● Each SAS/SATA port supports SSP, SMP and STP ●...

  • Page 23: Connectors And Indicators

    Modular RAID 3Gb/s (SAS1.0) 3.2.3 Connectors and indicators The following figure shows the location of the connectors and indicators on the SAS RAID controller. HDD LED connector iBBU connector LEDs SAS cable connectors RAID key holder Connectors Connector Type Description SAS MLC1 x4 SAS, ports 0 - 3 SFF 8087 Mini SAS connector for SAS IO cable to backplane and HDDs...

  • Page 24: Installation

    Step 1 Unpack the controller Unpack the new controller in a static-free environment. Remove it from the anti-static bag and inspect it for damage. If the controller appears to be damaged, contact the Fujitsu support service. Step 2 Prepare the server Turn off the server and remove the cover from the chassis.
  • Page 25 Modular RAID 3Gb/s (SAS1.0) Step 3 Install the new SAS RAID controller Insert the controller in a suitable PCIe slot on the system board, as shown in the figure above (see your system board guide for information on the PCIe slot). Press down gently but firmly to ensure the card is properly seated in the slot.
  • Page 26 The ServerView Suite DVD 1 includes drivers for the supported operating systems, along with documentation. You can view the supported operating systems and download the latest drivers for RAID adapters on the website at: http://ts.fujitsu.com/support/ For Japan please use the URL: http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/ Modular RAID Controllers...

  • Page 27: Installing An Optional Ibbu Module

    Modular RAID 3Gb/s (SAS1.0) 3.2.5 Installing an optional iBBU module 3.2.5.1 Features The MegaRAID LSliBBU01/LSliBBU07 is an innovative, industry-exclusive module and offers intelligent monitoring capabilities, accessible via ServerView RAID. The capabilities of the LSliBBU01/LSliBBU07 include monitoring the battery status and power levels as well as the ability to recondition and calibrate the battery for improved reliability.
  • Page 28 Modular RAID 3Gb/s (SAS1.0) Bottom Cable connector Figure 6: Position of the cable connector LSliBBU01 Cable connector Bottom Figure 7: Position of the cable connector LSIiBBU07 Note the cable connector marked with the red arrow and the holes (1) for the screws that attach the LSliBBU01/LSliBBU07 to the chassis.
  • Page 29 Modular RAID 3Gb/s (SAS1.0) To install the LSliBBU01/LSliBBU07 remotely to the RAID controller, proceed as follows: 1. Ground yourself, then remove the LSliBBU01/LSliBBU07 from its package. 2. Secure the LSliBBU01/LSliBBU07 to the server chassis as described in the server documentation. 3.
  • Page 30 Modular RAID 3Gb/s (SAS1.0) Modular RAID Controllers...

  • Page 31: Modular Raid 6Gb/S (Sas2.0)

    Make sure you observe the safety notes in chapter "Important information" on page The RAID controller "RAID 0/1 SAS based on LSI MegaRAID" is designed to drive the server's internal disk drive. The RAID stack is based on LSI ®...

  • Page 32: Features

    Modular RAID 6Gb/s (SAS2.0) 4.1.1 Features 3.3 V / 12 V PCIe add-in card ● 8 lanes wide 5 Gbit/s PCIe host bus ● 8 SAS / SATA ports ● each SAS / SATA port supports SSP, SMP, STP, and SATA protocols ●...

  • Page 33: Controller Versions

    Modular RAID 6Gb/s (SAS2.0) 4.1.2 Controller versions No. of SAS Name Chip Bracket type channels low profile S26361-D2607-Ax LSI SAS2008 full height 4.1.3 Connectors and indicators The following figure shows the location of the connectors and indicators on the SAS RAID controller. HDD LED connector SAS cable connectors LEDs...

  • Page 34: Installation

    To install the new controller, proceed as follows: Step 1 Unpack the controller Unpack the new controller in a static-free environment. Remove it from the anti-static bag and inspect it for damage. If the controller appears to be damaged, contact the Fujitsu support service. Modular RAID Controllers...
  • Page 35 Modular RAID 6Gb/s (SAS2.0) Step 2 Prepare the server Turn off the server and remove the cover from the chassis. Step 3 Install the new SAS RAID controller Press Here Press Here Edge of Motherboard Edge of Motherboard Insert the controller in a suitable PCIe slot on the system board, as shown in the figure above (see your system board guide for information on the PCIe slot).
  • Page 36 The ServerView Suite DVD 1 includes drivers for the supported operating systems, along with documentation. You can view the supported operating systems and download the latest drivers for RAID adapters on the website at: http://ts.fujitsu.com/support/ For Japan please use the URL: http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/ Modular RAID Controllers...

  • Page 37: Raid Controller "Raid Ctrl Sas 6G 5/6 512 Mb (D2616)

    Modular RAID 6Gb/s (SAS2.0) RAID Controller "RAID Ctrl SAS 6G 5/6 512 MB (D2616)" ATTENTION! Make sure you observe the safety notes in chapter "Important information" on page The RAID controller "RAID 5/6 SAS based on LSI MegaRAID" is designed to drive the server's internal disk drives.

  • Page 38: Features

    Modular RAID 6Gb/s (SAS2.0) 4.2.1 Features ® Industry-proven MegaRAID data protection ● Flexibility for both SAS 2.0 and SATA II ● Advanced management and configuration suites ● Supports RAID levels 0, 1, 1E, 5, 6, 10, 50 and 60 ● Optionally secured with BBU ●...

  • Page 39: Controller Versions

    Modular RAID 6Gb/s (SAS2.0) 4.2.2 Controller versions No. of SAS Bracket Name Chip Cache channels type low profile S26361-D2616-Ax LSI SAS2108 512 MB full height 4.2.3 Connectors and indicators The following figure shows the location of the connectors and indicators on the SAS RAID controller.
  • Page 40 Modular RAID 6Gb/s (SAS2.0) Connectors Connector Type Description SAS MLC1 x4 SAS, ports 0 - 3 SFF 8087 Mini SAS connector for SAS IO cable to backplane and HDDs SAS MLC2 x4 SAS, ports 4 - 7 SFF 8087 Mini SAS connector for SAS IO cable to backplane and HDDs HDD LED HDD activity...

  • Page 41: Installation

    Step 1 Unpack the controller Unpack the new controller in a static-free environment. Remove it from the anti-static bag and inspect it for damage. If the controller appears to be damaged, contact the Fujitsu support service. Step 2 Prepare the server Turn off the server and remove the cover from the chassis.
  • Page 42 Modular RAID 6Gb/s (SAS2.0) Step 3 Install the new SAS RAID controller Press Here Press Here Edge of Motherboard Edge of Motherboard Insert the controller in a suitable PCIe slot on the system board, as shown in the figure above (see your system board guide for information on the PCIe slot).
  • Page 43 The ServerView Suite DVD 1 includes drivers for the supported operating systems, along with documentation. You can view the supported operating systems and download the latest drivers for RAID adapters on the website at: http://ts.fujitsu.com/support/ For Japan please use the URL: http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/ Modular RAID Controllers...

  • Page 44: Installing An Optional Ibbu Module

    Modular RAID 6Gb/s (SAS2.0) 4.2.5 Installing an optional iBBU module 4.2.5.1 Features The MegaRAID LSIiBBU07 / LSIiBBU08 is an innovative, industry-exclusive module and offers intelligent monitoring capabilities, accessible via ServerView RAID. The capabilities of the LSIiBBU07 / LSIiBBU08 include monitoring the battery status and power levels as well as the ability to recondition and calibrate the battery for improved reliability.
  • Page 45 Modular RAID 6Gb/s (SAS2.0) Cable connector Bottom Figure 13: Position of the cable connector LSIiBBU07 / LSIiBBU08 Note the cable connector marked with the red arrow and the holes (1) for the screws that attach the LSIiBBU07 / LSIiBBU08 to the chassis. To install the LSIiBBU07 / LSIiBBU08 remotely to the RAID controller, proceed as follows: 1.
  • Page 46 Modular RAID 6Gb/s (SAS2.0) PIN1 Edge of Motherboard Edge of Motherboard Figure 14: Installing the iBBU07 / iBBU08 in a server chassis Modular RAID Controllers...

  • Page 47: Raid Controller "Py Sas Raid Mezz Card 6 Gb (D3016)

    Modular RAID 6Gb/s (SAS2.0) RAID Controller "PY SAS RAID Mezz Card 6 Gb (D3016)" ATTENTION! Make sure you observe the safety notes in chapter "Important information" on page The RAID controller "PY SAS RAID Mezz Card 6 Gb (D3016)" is designed to drive the BX400 and BX900 server's internal or external disk drives.

  • Page 48: Features

    Modular RAID 6Gb/s (SAS2.0) 4.3.1 Features ® Industry-proven MegaRAID data protection ● Flexibility for both SAS 2.0 and SATA II ● Advanced management and configuration suites ● Supports RAID levels 0, 1, 1E, 5, 6, 10, 50 and 60 ● Optionally secured with BBU ●...

  • Page 49: Connectors And Indicators

    Modular RAID 6Gb/s (SAS2.0) 4.3.3 Connectors and indicators The following figure shows the location of the connectors and indicators on the SAS RAID controller. iBBU SAS cable connectors iBBU connector SDB connector Modular RAID Controllers...

  • Page 50: Installation

    Step 1 Unpack the controller Unpack the new controller in a static-free environment. Remove it from the anti-static bag and inspect it for damage. If the controller appears to be damaged, contact the Fujitsu support service. Step 2 Prepare the server Shut down and power off the server and remove the server blade from the chassis.
  • Page 51 The ServerView Suite DVD 1 includes drivers for the supported operating systems, along with documentation. You can view the supported operating systems and download the latest drivers for RAID adapters on the website at: http://ts.fujitsu.com/support/ For Japan please use the URL: http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/ Modular RAID Controllers...

  • Page 52: Installing An Optional Ibbu Module

    Modular RAID 6Gb/s (SAS2.0) 4.3.5 Installing an optional iBBU module 4.3.5.1 Features The MegaRAID LSIiBBU08 is an innovative, industry-exclusive module and offers intelligent monitoring capabilities, accessible via ServerView RAID Manager. The capabilities of the LSIiBBU08 include monitoring the battery status and power levels as well as the ability to recondition and calibrate the battery for improved reliability.
  • Page 53 Modular RAID 6Gb/s (SAS2.0) Note the board to board connector (1) and the holes (2) for the screws that attach the LSIiBBU08 to the RAID Mezz Card. To install the LSIiBBU08 to the RAID controller, proceed as follows: 1. Ground yourself, then remove the LSIiBBU08 from its package. 2.

  • Page 54: Raid Controller "Raid Ctrl Sas 6G 1Gb (D3116)

    Modular RAID 6Gb/s (SAS2.0) RAID Controller "RAID Ctrl SAS 6G 1GB (D3116)" ATTENTION! Make sure you observe the safety notes in chapter "Important information" on page The RAID controller "RAID Ctrl SAS 6G 1GB (D3116)" is designed to drive the ®...

  • Page 55: Features

    Modular RAID 6Gb/s (SAS2.0) 4.4.1 Features ® Industry-proven MegaRAID data protection ● Flexibility for both SAS 2.0 and SATA II / SATA III ● Advanced management and configuration suites ● Supports RAID levels 0, 1, 1E, 5, 6, 10, 50 and 60 ●...

  • Page 56: Controller Versions

    Modular RAID 6Gb/s (SAS2.0) 4.4.2 Controller versions No. of SAS Bracket Name Chip PCIe Cache channels type S26361- low profile LSI SAS2208 PCIe 2.0 1 GB D3116-Bx full height S26361- low profile LSI SAS2208 PCIe 3.0 1 GB D3116-Cx full height 4.4.3 Connectors and indicators The following figure shows the location of the connectors and indicators on the...
  • Page 57 Modular RAID 6Gb/s (SAS2.0) Connectors Connector Type Description SFF 8087 Mini SAS connector for SAS IO SAS MLC1 x4 SAS, ports 0 - 3 cable to backplane and HDDs SFF 8087 Mini SAS connector for SAS IO SAS MLC2 x4 SAS, ports 4 - 7 cable to backplane and HDDs HDD activity 6-pin connector...

  • Page 58: Installation

    Step 1 Unpack the controller Unpack the new controller in a static-free environment. Remove it from the anti-static bag and inspect it for damage. If the controller appears to be damaged, contact the Fujitsu support service. Step 2 Prepare the server Turn off the server and remove the cover from the chassis.
  • Page 59 The ServerView Suite DVD 1 includes drivers for the supported operating systems, along with documentation. You can view the supported operating systems and download the latest drivers for RAID adapters on the website at: http://ts.fujitsu.com/support/ For Japan please use the URL: http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/ Modular RAID Controllers...

  • Page 60: Installing An Optional Tfm / Fbu

    FBU to provide the most flexibility within different environments. In newer chassis models Fujitsu offers mounting options using the common holder technology. Using the common holder technology facilitates mounting the FBU into the chassis.
  • Page 61 Modular RAID 6Gb/s (SAS2.0) For mounting the TFM, remove the controller from your system. When removing / connecting the FBU from / to the TFM, remove AC power from your system. To install the TFM and FBU, proceed as follows: Figure 17: Installing the TFM Ê...
  • Page 62 Modular RAID 6Gb/s (SAS2.0) Figure 18: Installing the FBU in the FBU holder Ê At a slight angle, fit the FBU under both retaining brackets of the FBU holder as shown (1). Push in the FBU until it locks in place (2). Figure 19: Connecting the FBU adapter cable to the FBU Ê...

  • Page 63: Raid Controller "Py Sas Raid Hdd Module (D2816)

    Modular RAID 6Gb/s (SAS2.0) RAID Controller "PY SAS RAID HDD Module (D2816)" ATTENTION! Make sure you observe the safety notes in chapter "Important information" on page The RAID controller "PY SAS RAID HDD Module (D2816)" is designed to drive the BX920 server's internal or BX400 / BX900 external disk drives. The RAID ®...

  • Page 64: Features

    Modular RAID 6Gb/s (SAS2.0) 4.5.1 Features ® Industry-proven MegaRAID data protection ● Flexibility for both SAS 2.0 and SATA II / SATA III ● Advanced management and configuration suites ● 12V PCIe RAID HDD module ● Supports RAID levels 0, 1, 1E, 5, 6, 10, 50 and 60 ●...

  • Page 65: Controller Versions

    Modular RAID 6Gb/s (SAS2.0) 4.5.2 Controller versions Name Chip PCIe Cache No. of SAS channels 2+2 ports for Storage Blade Connection S26361- LSI SAS2208 PCIe 2.0 512 MB D2816-Ax 2 ports for Blade internal HDD Connection 2+2 ports for Storage Blade Connection S26361- LSI SAS2208...

  • Page 66: Installation

    Step 1 Unpack the controller Unpack the new controller in a static-free environment. Remove it from the anti-static bag and inspect it for damage. If the controller appears to be damaged, contact the Fujitsu support service. Step 2 Prepare the server Shut down and power off the server and remove the server blade from the chassis.
  • Page 67 The ServerView Suite DVD 1 includes drivers for the supported operating systems, along with documentation. You can view the supported operating systems and download the latest drivers for RAID adapters on the website at: http://ts.fujitsu.com/support/ For Japan please use the URL: http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/ Modular RAID Controllers...

  • Page 68: Installing An Optional Fbu

    Modular RAID 6Gb/s (SAS2.0) 4.5.5 Installing an optional FBU 4.5.5.1 Features Using the LSI MegaRAID® CacheVault™ Technology offers better protection for controller cache with our eco-friendly, low-maintenance 6Gb/s LSI MegaRAID based controllers featuring CacheVault Technology. This technology offloads data stored in the LSI MegaRAID based controller cache to the NAND flash in the event of a power failure or other system occurrence where the contents of controller cache are most at risk.
  • Page 69 Modular RAID 6Gb/s (SAS2.0) Figure 21: LSI FBU02A module Ê Install the FBU into the system and connect it to the SAS RAID controller as described in the "PRIMERGY BX920 S3 Server Blade" Upgrade and Maintenance Manual. Modular RAID Controllers...

  • Page 70: Sas Controller "Py Sas Raid Hdd Module W/O Cache (D2837)

    Modular RAID 6Gb/s (SAS2.0) SAS Controller "PY SAS RAID HDD Module w/o Cache (D2837)" ATTENTION! Make sure you observe the safety notes in chapter "Important information" on page The RAID controller "PY SAS RAID HDD Module w/o Cache (D2837)" is designed to drive the BX400 and BX900 server's internal disk drives.

  • Page 71: Features

    Modular RAID 6Gb/s (SAS2.0) 4.6.1 Features Flexibility for both SAS 2.0 and SATA II / SATA III ● Advanced management and configuration suites ● 12V PCIe RAID HDD module ● Supports RAID levels 0, 1, 1E, 10 ● Offers advanced MegaRAID functionality to integrated LSI SAS ●...

  • Page 72: Connectors And Indicators

    Modular RAID 6Gb/s (SAS2.0) 4.6.3 Connectors and indicators The following figure shows the location of the connectors and indicators on the SAS controller. Indicators Indicators Description L1 (H322) Heart Beat L2 (H321) Error for Power PC1 L3 (H320) Error for Power PC0 Modular RAID Controllers...

  • Page 73: Installation

    Step 1 Unpack the controller Unpack the new controller in a static-free environment. Remove it from the anti-static bag and inspect it for damage. If the controller appears to be damaged, contact the Fujitsu support service. Step 2 Prepare the server Shut down and power off the server and remove the server blade from the chassis.
  • Page 74 The ServerView Suite DVD 1 includes drivers for the supported operating systems, along with documentation. You can view the supported operating systems and download the latest drivers for RAID adapters on the website at: http://ts.fujitsu.com/support/ For Japan please use the URL: http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/ Modular RAID Controllers...

  • Page 75: Modular Raid 12Gb/S (Sas3.0)

    Modular RAID 12Gb/s (SAS3.0) RAID Controller "PRAID EP400i / EP420i" ATTENTION! Make sure you observe the safety notes in chapter "Important information" on page The RAID controller "PRAID EP400i / EP420i" (D3216) is designed to drive the ® server's internal disk drives. The RAID stack is based on LSI MegaRAID offers powerful data throughput, extensive fault-tolerance and easy-to-use management.

  • Page 76: Features

    Modular RAID 12Gb/s (SAS3.0) 5.1.1 Features The RAID controller "PRAID EP400i / EP420i" implements the LSI SAS3108 which is an integrated SAS and I/O controller with dual embedded Power PC 476 cores running at speeds up to 1.2 GHz. The LSI SAS3108 also provides the following functionalities: Provides an 8-lane 5.0 / 8.0 Gbit PCIe 3.0 host bus.

  • Page 77: Connectors And Indicators

    Modular RAID 12Gb/s (SAS3.0) 5.1.3 Connectors and indicators The following figure shows the location of the connectors and indicators on the SAS RAID controller. Figure 24: "PRAID EP400i / EP420i" board layout SAS cable connectors TFM (optional) FBU connector on TFM HDD LED connector RAID controller indicator Modular RAID Controllers...

  • Page 78: Installation

    Step 1 Unpack the controller Unpack the new controller in a static-free environment. Remove it from the anti-static bag and inspect it for damage. If the controller appears to be damaged, contact the Fujitsu support service. Step 2 Prepare the server Turn off the server and remove the cover from the chassis.
  • Page 79 The ServerView Suite DVD 1 includes drivers for the supported operating systems, along with documentation. You can view the supported operating systems and download the latest drivers for RAID adapters on the website at: http://ts.fujitsu.com/support/ For Japan please use the URL: http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/ Modular RAID Controllers...

  • Page 80: Installing An Optional Tfm / Fbu

    FBU to provide the most flexibility within different environments. In newer chassis models Fujitsu offers mounting options using the common holder technology. Using the common holder technology facilitates mounting the FBU into the chassis.
  • Page 81 Modular RAID 12Gb/s (SAS3.0) For mounting the TFM, remove the controller from your system. When removing / connecting the FBU from / to the TFM, remove AC power from your system. Depending on the controller cache size, two different TFM kits are available.
  • Page 82 Modular RAID 12Gb/s (SAS3.0) Figure 26: Installing the TFM (B) Ê Secure the PRAID EP400i/EP420i TFM on the controller with the two screws from the TFM kit. Modular RAID Controllers...
  • Page 83 Modular RAID 12Gb/s (SAS3.0) Installing the FBU This description is only an example. The delivered FBU can be different depending on your server. Refer to your server’s Upgrade and Maintenance Manual for mounting details. Ê Remove the FBU from its package. Figure 27: Installing the FBU in the FBU holder Ê...
  • Page 84 Modular RAID 12Gb/s (SAS3.0) Figure 28: Connecting the FBU adapter cable to the FBU Ê Connect the cable end of the FBU cable to the FBU adapter cable as shown. Ê Secure the FBU to the server chassis as described in the server documentation.

  • Page 85: Raid Controller "Praid Em400I

    Modular RAID 12Gb/s (SAS3.0) RAID Controller "PRAID EM400i" ATTENTION! Make sure you observe the safety notes in chapter "Important information" on page The RAID controller "PRAID EM400i" (D2916) is a high-performance PCIe Gen3 x 8 to 8-port SAS/SATA bridge built on the LSI SAS3108 dual core ROC with 72-bit DDRIII interface that drives 1GB cache memory.

  • Page 86: Features

    Modular RAID 12Gb/s (SAS3.0) 5.2.1 Features The RAID controller "PRAID EM400i " implements the LSI SAS3108 which is an integrated SAS and I/O controller with dual embedded Power PC 476 cores running at speeds up to 1.2 GHz. The LSI SAS3108 also provides the following functionalities: Provides an 8-lane 8.0 Gbit PCIe 3.0 host bus.

  • Page 87: Connectors And Indicators

    Modular RAID 12Gb/s (SAS3.0) 5.2.3 Connectors and indicators The following figure shows the location of the connectors and indicators on the SAS RAID controller. H100, H101, H322, H102 Figure 31: "PRAID EM400i" board layout HSEC8 connector for PCIe UART connector SuperCap Module connector Indicators 2x SAS connectors (port 0-1)

  • Page 88: Installation

    To install the new controller, proceed as follows: Step 1 Unpack the controller Unpack the new controller in a static-free environment. Remove it from the anti-static bag and inspect it for damage. If the controller appears to be damaged, contact the Fujitsu support service. Modular RAID Controllers...
  • Page 89 The ServerView Suite DVD 1 includes drivers for the supported operating systems, along with documentation. You can view the supported operating systems and download the latest drivers for RAID adapters on the website at: http://ts.fujitsu.com/support/ For Japan please use the URL: http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/ Modular RAID Controllers...

  • Page 90: Raid Controller "Praid Cm400I

    Modular RAID 12Gb/s (SAS3.0) RAID Controller "PRAID CM400i" ATTENTION! Make sure you observe the safety notes in chapter "Important information" on page The RAID controller "PRAID CM400i" (D2937) is a high-performance PCIe Gen3 x 8 to 8-port SAS/SATA bridge built on the LSI SAS3108 dual core. It supports 1.5Gb/s, 3.0Gb/s, 6.0Gb/s and 12Gb/s SAS, SATA and solid state drives (SSDs) with different RAID levels.

  • Page 91: Features

    Modular RAID 12Gb/s (SAS3.0) 5.3.1 Features The RAID controller "PRAID CM400i" implements the LSI SAS3108 which is an integrated SAS and I/O controller with dual embedded Power PC 476 cores running at speeds up to 1.2 GHz. The LSI SAS3108 also provides the following functionalities: Provides an 8-lane 8.0 Gbit PCIe 3.0 host bus.

  • Page 92: Connectors And Indicators

    Modular RAID 12Gb/s (SAS3.0) 5.3.3 Connectors and indicators The following figure shows the location of the connectors and indicators on the SAS RAID controller. Figure 33: "PRAID CM400i" board layout HSEC8 connector for PCIe UART connector SuperCap Module connector Indicator (H322 Heart Beat) 2x SAS connectors (port 0-1) SAS connector (port 4-7) Modular RAID Controllers...

  • Page 93: Installation

    Step 1 Unpack the controller Unpack the new controller in a static-free environment. Remove it from the anti-static bag and inspect it for damage. If the controller appears to be damaged, contact the Fujitsu support service. Step 2 Prepare the server Shut down and power off the server.
  • Page 94 The ServerView Suite DVD 1 includes drivers for the supported operating systems, along with documentation. You can view the supported operating systems and download the latest drivers for RAID adapters on the website at: http://ts.fujitsu.com/support/ For Japan please use the URL: http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/ Modular RAID Controllers...

  • Page 95: Raid Controller "Praid Cp400I

    Modular RAID 12Gb/s (SAS3.0) RAID Controller "PRAID CP400i" ATTENTION! Make sure you observe the safety notes in chapter "Important information" on page The RAID controller "PRAID CP400i" (D3307) is a dual-PHY, SAS PCIe RAID controller and is used in a system with a PCIe slot. PCIe goes beyond the PCI specification in that it is intended as a unifying I/O architecture for various systems.

  • Page 96: Features

    Modular RAID 12Gb/s (SAS3.0) 5.4.1 Features The RAID controller "PRAID CP400i" implements the LSI Corp. 3008 SAS ROC which is an integrated SAS and I/O controller with embedded Power PC 476 core running at speeds up to 1.2 GHz. The 3108 SAS ROC also provides the following functionalities: Provides an 8-lane 8.0 Gbit PCIe 3.0 host bus.

  • Page 97: Connectors And Indicators

    Modular RAID 12Gb/s (SAS3.0) 5.4.3 Connectors and indicators The following figure shows the location of the connectors and indicators on the SAS RAID controller. Figure 35: "PRAID CP400i" board layout HDD LED connector Indicators SAS connectors Connectors Connector Type Description SFF 8643 Mini SAS HD 4i connector for SAS SAS MLC1 x4 SAS, ports 0- 3 IO cable to backplane and HDDs...

  • Page 98: Installation

    Step 1 Unpack the controller Unpack the new controller in a static-free environment. Remove it from the anti-static bag and inspect it for damage. If the controller appears to be damaged, contact the Fujitsu support service. Step 2 Prepare the server Shut down and power off the server.
  • Page 99 The ServerView Suite DVD 1 includes drivers for the supported operating systems, along with documentation. You can view the supported operating systems and download the latest drivers for RAID adapters on the website at: http://ts.fujitsu.com/support/ For Japan please use the URL: http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/ Modular RAID Controllers...

  • Page 100: Raid Controller "Praid Ep420E

    Modular RAID 12Gb/s (SAS3.0) RAID Controller "PRAID EP420e" ATTENTION! Make sure you observe the safety notes in chapter "Important information" on page The RAID controller "PRAID EP420e" brings 12Gb/s Serial Attached SCSI and 6Gb/s SATA III performance to workstation, and server designs. Figure 36: "PRAID EP420e"...

  • Page 101: Features

    Modular RAID 12Gb/s (SAS3.0) 5.5.1 Features The RAID controller "PRAID EP420e" implements the LSI Corp. 3108 SAS ROC. The 3108 SAS ROC also provides the following functionalities: PCIe x8 lane width ● PCIe 3.0 performance up to 8Gb/s per lane ●...

  • Page 102: Controller Versions

    Modular RAID 12Gb/s (SAS3.0) 5.5.2 Controller versions No. of SAS Bracket Name Chip PCIe channels type low profile PRAID EP420e LSI SAS3108 PCIe 3.0 full height The following TFM kit is available. Name Cache TFM kit PRAID EP420e 2 GB PRAID EP420i TFM (LSZ:03-25444-01) Figure 37: "PRAID EP420e"...

  • Page 103: Connectors And Jumpers

    Modular RAID 12Gb/s (SAS3.0) 5.5.3 Connectors and jumpers The following figure shows the location of the connectors and jumpers on the SAS RAID controller. Figure 38: "PRAID EP420e" board layout HDD LED1 connector HDD LED2 connector CacheVault Flash Module (ONFI) interface Cache write pending connector Two SAS connectors Connectors...

  • Page 104: Installation

    Modular RAID 12Gb/s (SAS3.0) Connector Type Description CacheVault Flash Connects the RAID controller to a Module (ONFI) 80-pin connector TFM (optional) interface Connector for an LED mounted on the system enclosure. The LED Cache write 2-pin connector indicates that the data in the cache pending connector has yet to be written to the storage devices.
  • Page 105 Step 1 Unpack the controller Unpack the new controller in a static-free environment. Remove it from the anti-static bag and inspect it for damage. If the controller appears to be damaged, contact the Fujitsu support service. Step 2 Prepare the server Enable PCI Option ROM scan for appropreated PCI slot in BIOS setup.

  • Page 106: Installing An Optional Tfm / Fbu

    Modular RAID 12Gb/s (SAS3.0) 5.5.5 Installing an optional TFM / FBU The "PRAID EP420e" can be equipped with the same TFM as for "PRAID EP420i". Please proceed in the same way as described in section "Installing an optional TFM / FBU" on page The FBU type, the FBU mounting position and the FBU adapter cable may be different for your server.

  • Page 107: Raid Controller "Praid Ep440I

    Modular RAID 12Gb/s (SAS3.0) RAID Controller "PRAID EP440i" ATTENTION! Make sure you observe the safety notes in chapter "Important information" on page The RAID controller "PRAID EP440i" is designed to drive the server's internal ® disk drives. The RAID stack is based on LSI MegaRAID and offers powerful data throughput, extensive fault-tolerance and easy-to-use management.

  • Page 108: Features

    Modular RAID 12Gb/s (SAS3.0) 5.6.1 Features The RAID controller "PRAID EP440i" implements the LSI SAS3108 which is an integrated SAS and I/O controller with dual embedded Power PC 476 cores running at speeds up to 1.2 GHz. The LSI SAS3108 also provides the following functionalities: Provides an 8-lane 5.0 / 8.0 Gbit PCIe 3.0 host bus.

  • Page 109: Controller Versions

    Modular RAID 12Gb/s (SAS3.0) 5.6.2 Controller versions No. of SAS Bracket Name Chip PCIe Cache channels type low profile PRAID EP440i LSI SAS3108 PCIe 3.0 4 GB full height 5.6.3 Connectors The following figure shows the location of the connectors on the SAS RAID controller.
  • Page 110 Modular RAID 12Gb/s (SAS3.0) Connecting the Global Drive Activity LED cable To activate the HDD activity indicator at the front of the system a cable must be connected to the Global Drive Activity LED connector of the RAID controller "PRAID EP440i" (see figure 40).
  • Page 111 Modular RAID 12Gb/s (SAS3.0) Figure 42: Connecting the Global Drive Activity LED cable - variant 2 Ê Connect the 2-pin connector (2) of the Global Drive Activity LED cable with the "•" marking plugged to pin 1. Ê Connect the 4-pin connector (1) of the Global Drive Activity LED cable to the system board.

  • Page 112: Installation

    Step 1 Unpack the controller Unpack the new controller in a static-free environment. Remove it from the anti-static bag and inspect it for damage. If the controller appears to be damaged, contact the Fujitsu support service. Step 2 Prepare the server Turn off the server and remove the cover from the chassis.
  • Page 113 The ServerView Suite DVD 1 includes drivers for the supported operating systems, along with documentation. You can view the supported operating systems and download the latest drivers for RAID adapters on the website at: http://ts.fujitsu.com/support/ For Japan please use the URL: http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/ Modular RAID Controllers...

  • Page 114: Installing An Optional Fbu

    FBU to provide the most flexibility within different environments. In newer chassis models Fujitsu offers mounting options using the common holder technology. Using the common holder technology facilitates mounting the FBU into the chassis.
  • Page 115 Modular RAID 12Gb/s (SAS3.0) Installing the FBU This description is only an example. The delivered FBU can be different depending on your server. Refer to your server’s Upgrade and Maintenance Manual for mounting details. Ê Remove the FBU from its package. Figure 43: Installing the FBU in the FBU holder Ê...
  • Page 116 Modular RAID 12Gb/s (SAS3.0) Figure 44: Connecting the FBU adapter cable to the FBU Ê Connect the cable end of the FBU cable to the FBU adapter cable as shown. Ê Secure the FBU to the server chassis as described in the server documentation.

This manual is also suitable for:

Raid ctrl sas 6g 0/1D2607D2616Raid ctrl sas 6g 5/6 512mbRaid ctrl sas 6g 1gbPy sas raid mezz card 6gb d3016 ... Show all

Table of Contents