Related Manuals for Panasonic DTS-1800-U6GPDR
Summary of Contents for Panasonic DTS-1800-U6GPDR
- Page 1 DTS-1800-U6GPDR Fibre Optic Video Transmission Panasonic VLT System Installation. 1. Important Safety Instructions. 2. Product description. 3. Overview of System Connections. 4. VLT Camera Control Setup. 5. VLT Settings for Cine Live 4K.
-
Page 2: Safety Instructions
1. Safety Instructions. Important Safety Instructions This symbol, whenever it appears alerts the user to the presence of uninsulated dangerous voltages inside the enclosure – voltage that may be sufficient to constitute a risk of shock. This symbol, whenever it appears alerts the user to important operating and maintenance instructions in the accompanying literature. -
Page 3: Product Description
2. Product Description. The DTS1800 is a fibre optic video transmission system that incorporates all the features and functions required to use a Broadcast Camera in a live studio or outside broadcast scenario. Along with native, uncompressed video transmission up to 4K resolution the system transmits/receives audio, camera control data, tally, monitor video, intercom and power for the camera. - Page 4 The HD RET outputs the 1.5G RETURN VIDEO that is transmitted up from the base station. This is also used for Genlock/Sync for the Panasonic VLT. This channel also provides diagnostics in the form of test patterns transmitted from the base station to the Fibre Adaptor when no video signal is input.
- Page 5 5. I/O 4. The FCA IN 4 connection has been configured to provide and additional Viewfinder Output that can be used for a large on board monitor/VF. 6. RJ45 Ethernet. The DTS1800 Fibre system provides and Ethernet Link that can be used for Camera Control of the VLT by connecting the supplied RJ45 flat Ethernet cable between the FCA and the VLT Ethernet port.
-
Page 6: Monitor Input
Programme Video outputs. 5. CAM & ERI RJ45 Ethernet Connections. Provides an Ethernet channel for Panasonic ROP. When installed with an ERI performing protocol translation this is linked to the ERI Ethernet Port with the supplied Flat Ethernet Cable (Please see installation section below.) 6. -
Page 7: Analogue Audio
7. VBS OUT. VBS OUT connector outputs the composite video channel from the camera for monitoring purposes (where available.) When no video signal is input to the fibre adaptor MON input then the Fibre Adaptor generates a test pattern that is transmitted and received at the base station. 8. - Page 8 4. VLT Camera Control Setup. 4.1. Adjusting the IP address of the ERI. NOTE: The ERI IP address is the IP address assigned to the ERI. A. Power on system and wait for ERI to boot. On the Base station main status screen, next to the ERI entry a coloured indicator will be present when the ERI has booted.
- Page 9 H. The screen will display REBOOTING. When rebooting has finished the unit will return to the Basestation main status screen. 4.4. Setup of Panasonic AK-HRP1000 ROP for use with DTS1810U Basestation ERI. NOTE: Check for the latest ROP Firmware. 4.4.1 CONNECT Setting adjustment.
- Page 10 C. Press the MENU button to exit. 4.4.2 ROP IP address setting. Note: This must be the same as address set in the ERI - IP Adjust: - ROP Adjust menu. In this example 192.168.1.003. The Port setting should be 35200. A.
- Page 11 H. Highlight and select NETWORK SEL and set to LAN. I. Highlight EXIT and select it. J. To set up a User Account Refer to Panasonic ‘Multicam White Paper’ K. NOTE: for ROP operation select SCENE 1 under Main Colour Setting.