Honeywell UniLED Quick Start Manual

Dimensional drawings:

Installation:

1

Step 1: Install the mounting bracket to the wall/ceiling. Connect the 24V cable to C1 and C2 on the terminal

block, GND is optional. If surface-mounted cables are used, trim the knock-out opening in the luminaire.

Step 2: Hook the luminaire onto the "hinge" on the bracket and swing inwards until it locks.

Service/maintenance:

3

Step 3: First, remove the lens by carefully using a flat-bladed screwdriver at the marked positions.

Step 4: Then, use a flat-bladed screwdriver to remove the luminaire housing from the socket.

At the end of their useful life the

packaging and product should be

disposed of via a suitable

recycling centre. Do not dispose

of with your normal household

waste. Do not burn.

Honeywell Life Safety AS, Po. Box 3514, N-3007 Drammen, Norway

UniLED

24V

2

4

Technical description

Part no.:

Lumen output:

Operation voltage:

Maximum power consumption:

Ambient temperature range:

Relative humidity:

Weight:

Classification:

IP20

GB

290052

210 lm

17-45V DC / 13-35V AC 50/60Hz

3W / 4.5VA

-20 to +50°C

Up to 95%

800g

EN 60598-2-22