Table of Contents

Quick Links

RS-422A SERIAL INTERFACE BOARD
BKDS-2530
電気製品は、安全のための注意事項を守らないと、火災
警告
や人身事故になることがあります。
• ご使用にあたっては、 デジタルビデオスイッチャーのプロセッサー本体に
付属しているオペレーションマニュアルの 「安全のために」 をよくお読み
ください。
• 本機を誤って装着すると、 火災・感電やその他の事故により、 けがをした
り周辺の物品に損害を与えたりすることがあります。危険を避けるため、
装着はサービストレーニングを受けた技術者にご依頼ください。
本機を装着する技術者へ
装着のしかたは、付属の
OPERATION MANUAL
1st Edition (Revised 1)
Serial No. 10001 and Higher
Installation Manual
をご覧ください。
[Japanese/English]
Table of Contents
loading

Summary of Contents for Sony BKDS-2530

  • Page 1 RS-422A SERIAL INTERFACE BOARD BKDS-2530 電気製品は、安全のための注意事項を守らないと、火災 警告 や人身事故になることがあります。 • ご使用にあたっては、 デジタルビデオスイッチャーのプロセッサー本体に 付属しているオペレーションマニュアルの 「安全のために」 をよくお読み ください。 • 本機を誤って装着すると、 火災・感電やその他の事故により、 けがをした り周辺の物品に損害を与えたりすることがあります。危険を避けるため、 装着はサービストレーニングを受けた技術者にご依頼ください。 本機を装着する技術者へ Installation Manual 装着のしかたは、付属の をご覧ください。 [Japanese/English] OPERATION MANUAL 1st Edition (Revised 1) Serial No. 10001 and Higher...
  • Page 2 日本語 注意 この装置は、情報処理装置等電波障害自主規制協議会(VCCI)の基 準に基づく第一種情報技術装置です。 この装置を家庭環境で使用す ると電波妨害を引き起こすことがあります。 この場合には使用者が 適切な対策を講ずるよう要求されることがあります。...
  • Page 3: Table Of Contents

    ルマルチエフェク トDME-3000/7000をパーソナルコンピューターと ト 接続するための RS-422Aシリアルイ ンターフェースボー ドです。 PCイ ンターフェースユニッ トでは、 GPI 入出力と して TTL 入力 4 系 BKDS-2530とオペレーシ ョ ンソフ ト ウェアBZS-2050をパーソナルコ 統(内2系統は未使用)と リ レー接点出力4系統を使用できます。 入 ンピューターにイ ンス ト ールする と、 DVS-2000CやDME-3000/7000 力2系統は、 それぞれタイ ムライ ンのRUNとREWINDのコン ト ロー をコ ンピューターのGUI 画面から操作する こ とができます。...
  • Page 4: 各部の名称と働き

    各部の名称と働き CPU-252 コンピューター前面側 端子 スイッチ スイッチ 端子 インジケーター テストピン 、 テストピン テストピン テストピン インジケーター !¡ インジケーター !™ テストピン !£ テストピン !¢ テストピン RS-232C 端子 ピン、メス、 準拠 、 テストピン この端子を介してフ ァームウェアをフ ラ ッ シュROMにローディ ングし CPU のタイ マー出力の確認に使用します。 ます。 テストピン スイッチ リ...
  • Page 5 !£ !¢ テストピン テストピン CPU の I/Oポー トの出力確認用です。ブザーに接続されていま CPUのI/Oポー トの出力確認用です。 ウォ ッチ ド ッグタイ マー のク す。 リ アを行います。 コンピューター裏面側 〜 インジケーター スイッチ スイッチ 端子 スイッチ TP11 テストピン TP12 テストピン TP10 テストピン 9 ジャンパー COP1 〜 インジケーター !¡ 終端スイッチ !™ 端子...
  • Page 6 各部の名称と働き 9 ジャンパー COP1 スイッチ フ ァームウェアの動作を設定します。 コンピューターに対する割り込みを設定します。コンピューターに よって設定は異なり ます。 と機能 の場合 の場合 1: リ セッ ト時にプログラムローダーを起 起動できる 起動しない 〜 インジケーター 動するかど うかを選択 (通常設定) 2:ローディ ングに使う シ リ アルポー トの CN5 端子 CN3 端子 CPU の通信用ポー トの出力に関する情報を示します。 設定 (通常設定) :スイ ッチャーから信号を受信すると点滅する。 3:シ...
  • Page 7 EDITOR ( (D-sub 9 RS-422A エディター 端子 ピン、 準 拠 未使用。 SWITCHER ( スイッチャー 端子 (D-sub 9 ピン、 422A 準拠 DVS-2000C のEDITOR B 端子と接続します。 DMEs ( (D-sub 9 デジタルマルチエフェクト 端子 ピン、 RS-422A 準拠 DME-3000/7000 の SWITCHER PANEL 端子と接続します。 AUX1 〜 AUX3 ( オグジリアリー...
  • Page 8: Cpu-252

    接続とインストール BKDS-2530とオペレーシ ョ ンソフ ト ウェアBZS-2050をイ ンス ト ールす インターフェースユニットの接続 るには、以下のコンピューターおよび関連製品が必要です。 コンピューター本体 : IBM PC/AT互換機(フルサイ ズの拡張基 CPU-252を装着したパーソナルコンピューターとPCイ ンターフェー 板が装着できる もの) スユニッ トの接続方法を下図に示します。 :Intel  Pentium  166MHz 以上 オ ペ レ ー テ ィ ン グ シ ス テ ム:Microsoft  Windows  NT Workstation 4.0 メインメモリー...
  • Page 9: Bzs-2050 のインストール

    BZS-2050 デバイスドライバーを設定する のインストール 前項 「GUIアプリ ケーシ ョ ンをイ ンス ト ールする」 の手順に従っ オペレーシ ョ ンソフ ト ウェアBZS-2050はフロ ッ ピーディ スク2枚に収 て、 GUIアプリ ケーシ ョ ンをイ ンス ト ールする。 納されています。 それぞれ、 GUIアプリ ケーシ ョ ン、デバイ ス ドライ バーの設定フ ァイ ルが入っています。 また、 ユーザーガイ ドのフ ァイ フロ...
  • Page 10: システム構成例

    システム構成例 BKDS-2530を使用したシステムの構成例を下図に示します。 BKDS-2010 スイッチャーコントロールパネル SWITCHER PANEL DVS-2000C MODEL DVS-2000C デジタルビデオ スイッチャー OUTPUTS PRIMARY EDITOR B INPUTS インターフェースユニット SWITCHER DMEs パーソナルコンピューター SWITCHER PANEL CONTROL PANEL DIGITAL OUTPUTS DIGITAL INPUTS BKDM-3010 DME コントロールパネル DME-3000/7000 デジタルマルチエフェクト SWITCHER PANEL 台目の の 端子へ BKDS-2061 ピン...
  • Page 11: 仕様

    仕様 CPU-252 付属品 電源 + 5V 50ピン リモー ト コン ト ロールケーブル(30 cm、 1) 消費電流 最大 0.5A オペレーシ ョ ンマニュアル(1) 温度範囲 保存時:−20 〜+ 60℃ イ ンス ト レーシ ョ ンマニュアル(1) 動作保証:5 〜 40℃ 性能保証:10〜 35℃ 仕様および外観は、改良のため予告なく 変更することがあ り ます (コンピューターの仕様に準ずる。 ) が、...
  • Page 12 English For customers in the USA This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 13: Overview

    Installing the Software..............7 (E) Example System Configuration ............8 (E) Specifications ..................9 (E) Overview The BKDS-2530 is an RS-422A serial interface board Support for switcher/DME timeline for connecting the DVS-2000C Digital Video Switcher operation and the DME-3000/7000 Digital Multi Effects to a personal computer.
  • Page 14: Location And Function Of Parts

    Location and Function of Parts CPU-252 Front 1 Connector CN5 2 Switch S3 3 Switch S1 4 Connector CN3 5 Indicator D2 6 Test pin TP2 7 Test pins TP4 and TP5 8 Test pin TP3 9 Test pin TP1 0 Indicator D4 !¡...
  • Page 15 !£ Test pin TP6 !¢ Test pin TP7 Used to check the processor I/O port outputs. Used to check the processor I/O port outputs. Clears Connected to the buzzer. the watchdog timer Rear 1 Indicators D6 to D9 2 Switch S5 3 Switch S4 4 Connector CN7 5 Switch S2...
  • Page 16: Cpu-252

    Location and Function of Parts 5 Switch S2 9 Jumper COP1 Controls firmware operation. Used to set the IRQ number. This setting may differ from PC to PC. Number and function 1: Selects whether or not activate do not activate 0 Indicators D14 to D16 to activate the program (normal setting)
  • Page 17 4 SWITCHER connector (D-sub 9-pin, RS-422A) Connect to the DVS-2000C EDITOR B connector. 5 DMEs connector (D-sub 9-pin, RS-422A) Connect to the DME-3000/7000 SWITCHER PANEL connector. 6 AUX1 to AUX3 connectors (D-sub 9-pin, RS- 422A) Unused. 7 GPI connector (D-sub 15-pin) Used to input and output trigger signals from and to external equipment.
  • Page 18: Connection And Installation

    Connection and Installation The following computer configuration is necessary to Connecting the PC Interface Unit install the BKDS-2530 and its operation software BZS-2050: The connection of the computer with the CPU-252 Computer: IBM PC/AT compatible (must be able to installed to the PC Interface Unit is shown in the figure accept full-sized expansion cards) below.
  • Page 19: Installing The Software

    Setting up the device driver Installing the Software Install the GUI application, using the procedure The BZS-2050 Operation Software is contained on two described above under “Installing the GUI floppy disks. One contains the graphical interface GUI application”. application and the other contains device driver settings file.
  • Page 20: Example System Configuration

    Example System Configuration An example of a system using the BKDS-2530 is shown below. BKDS-2010 Switcher Control Panel SWITCHER PANEL DVS-2000C Digital Video Switcher MODEL DVS-2000C OUTPUTS PRIMARY EDITOR B INPUTS PC Interface Unit SWITCHER DMEs Personal computer SWITCHER PANEL...
  • Page 21: Specifications

    Specifications Remote control connectors CPU-252 50-pin, half-pitch TERMINAL D-sub 9-pin, RS-232C Power requirements EDITOR D-sub 9-pin, RS-422A SWITCHER D-sub 9-pin, RS-422A Current consumption DMEs D-sub 9-pin, RS-422A Max. 0.5 A AUX1 to AUX3 D-sub 9-pin, RS-422A (currently Temperature range may not be used) Storage: –20°C to +60°C (–4°F to D-sub 15-pin +140°F)
  • Page 23 The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any...
  • Page 24 Printed in Japan Sony Corporation BKDS-2530(SY, 1998.11.13 和 英 © 1997 Broadcasting & Professional Systems Company 3-860-687-02 (1)

Table of Contents