D-Link DGE-530T Quick Install Manual

Quick Install Guide

Gigabit Desktop PCI Adapter

Thank you for purchasing the Gigabit Desktop PCI Adapter. Follow the easy

steps in this guide to properly set up your adapter. Please verify that all the

package contents listed below are available.

DGE-530T Gigabit Desktop PCI Adapter

Low Profile Bracket

CD with drivers, software, and manual

If any of the above items are missing, please contact your reseller.

• A computer with an available 32-bit PCI bus master slot operating at 33MHz

• Windows 10, 8.1, 8, 7, Vista, Server 2000/2003/2008/2012, Linux 2.4.x and above,

or Mac OS 10.6 and above

• 512MB of RAM (1GB or more recommended)

• Intel Pentium 4 processor 2.0GHz (or equivalent) or faster

• CD-ROM Drive

DGE-530T

Installation

Note: Do NOT plug the adapter into your computer before installing the

drivers. Also, write down the serial number and hardware revision (e.g. D2)

before installing the adapter. If you contact technical support, you will need

this information.

Step 1 - Turn on your computer and Insert the D-Link DGE-530T Driver CD into

the CD-ROM drive.

If the CD Autorun function does not automatically start on your computer, go to

Start > Run. In the run command box type D:\autorun.exe (where D: represents

the drive letter of your CD-ROM drive). Drivers for non-Windows operating systems

are located on the D-Link CD.

Step 2 - When the autorun screen appears, click Install Driver. An Installation

Wizard will guide you through the process, no matter which operating system

you are running. This process will install drivers and software.

Step 3 - Once the installation is complete, click OK to finish.

Step 4 - Install the DGE-530T into your computer.

a. Shut down the computer, unplug its power cord, and remove

the chassis cover. Note that opening the case of your computer

may compromise the warranty of your computer. Consult the

computer manufacturer before opening the case to ensure that

you adhere to warranty guidelines.

b. Insert the contact edge of the DGE-530T card into the connector

of any available PCI Bus Master expansion slot. Press the card

firmly into the connector such that the card's contacts are fully

seated in the connector.

c. Install the bracket screw that secures the card to the computer

chassis.

d. Replace the computer's chassis cover. Connect an Ethernet cable

from the adapter to your router, switch or Ethernet device.

Step 5 - Plug in the power cable, and power on your computer. Once you boot

your computer, Windows

will automatically install the drivers.

®

Windows

10/8/7/Vista

users: You will receive a pop-up window

®

®

stating Windows has finished installing the DGE-530T adapter.

Step 6 - Please refer to the user manual on the supplied CD-ROM for more

information on configuring your adapter and advanced features.

Technical Support

Having trouble installing your new product? D-Link's website contains the latest

user documentation and software updates for D-Link products. U.S. and Canadian

customers can contact D-Link Technical Support through our website.

United States

Canada

Internet:

http://support.dlink.com

Internet:

http://support.dlink.ca

©2017 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link

Corporation or its subsidiaries in the United States and/or other countries. Other trademarks or registered trademarks are the

property of their respective owners. Product specifications, size and shape are subject to change without notice, and actual product

appearance may differ from that depicted on the package. Visit dlink.com (US) or dlink.ca (Canada) for more details.

Version 4.10(NA)_128x188 | Feb 14, 2017 5302760