Quick Links
LED Luminaires
(For BT22 Series of CE version)
BEFORE YOU BEGIN
Read these instructions completely and carefully.
RISK OF ELECTRIC SHOCK
• Turn power off before inspection, installation or removal.
• Properly ground electrical enclosure.
Save These Instructions
Use only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer.
Tools and components required:
• Phillips head screwdriver.
• UL approved conduit fitting.
• UL approved twist-on wire connectors.
Prepare Electrical Wiring
Electrical Requirements
• LED driver must be supplied with 220-240 VAC, 50/60 Hz and connected to an individual properly grounded branch circuit,
protected by a 15 or 20 ampere circuit breaker. Use Min. 75 °C supply conductor.
Grounding Instructions
• The grounding and bonding of the overall system shall be done in accordance with National Electric Code (NEC) Article 600
and local codes.
imagination at work
WARNING
RISK OF FIRE
• Follow all NEC or IEC and local codes.
• Use only UL or IEC approved wire for input/output connections.
Minimum size 18 AWG (0.75 mm
Installation Guide
2
).
Related Manuals for GE BT22 Series
Summary of Contents for GE BT22 Series
- Page 1 Installation Guide LED Luminaires (For BT22 Series of CE version) BEFORE YOU BEGIN Read these instructions completely and carefully. WARNING RISK OF ELECTRIC SHOCK RISK OF FIRE • Turn power off before inspection, installation or removal. • Follow all NEC or IEC and local codes.
- Page 2 GE Lighting Solutions • www.gelightingsolutions.com GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. Lumination is a trademark of GE Lighting Solutions, LLC. The GE brand and logo are trademarks of the General Electric Company. © 2013 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
- Page 3 EMEA: Information provided is subject to change without notice. Please verify all details with GE. All values are design or typical values when GE Lighting GE Hungary Kft. measured under laboratory conditions, and GE makes no warranty or General Electric company Váci út 77.