Motorola LUM0150B Manual

Congratulations on your choice of the Motorola LUMO150B Modular Light. The Motorola LUMO150B combines

high performance Flashlight / Lantern and Bluetooth Speaker. Please take a few moments to read this user guide to ensure that

you get the best performance.

Included

1 X Motorola Flashlight Lantern

1 X Bluetooth Speaker Module

1 X USB to micro-USB cable (power charger only)

H

H

Module

Size

Operation voltage

Batteries Type

Battery quantity

LED

Lumens

Operation button

Max. operation time

Charging current

Low Power LED indication

Charging LED indication

Full Charging LED indication

Charging time (1300mA)

Charging USB port

Water proof

Modular Light

LUMO150B

Flashlight / Lantern

Bluetooth Speaker

Ø51.5*153mm

Ø51.5*64mm

3-6V

3-6V

AA Ni-MH rechargeable

AA Ni-MH rechargeable

4pcs

NIL

Cree XPG2

NIL

Max.180Lm

NIL

M logo button

ON / OFF

>5H

>5H

NIL

Max.250mA

NIL

Voice indicator

NIL

Red/Green alternatively

NIL

Green LED on

NIL

Min.8H

NIL

Micro USB

IPX4

IPX4

PAGE 1/4

Flashlight/Lantern with Bluetooth Speaker Module

1. Unscrew the Bluetooth Speaker module by turning counterclockwise 1 & 3 . Take out the battery

holder 2 and insert 4 AA alkaline or rechargeable batteries.

2. Position batteries according to polarity marking 2 , and screw the Bluetooth Speaker module by

turning clockwise.

3. To turn the Flashlight / Lantern on, pull the globe and press the "M" button a , the flashlight will

always turn on at the brightest setting with the lantern mode. Hold the "M" button a down can dim

or brighten. The light will flash twice at the lowest / brightest level.

- Do not attempt to charge alkaline batteries.

- Do not mix old and new batteries.

- Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cd, Ni-MH, etc.) batteries.

4. To enable flashlight mode, collapse the globe.

5. Press and hold the "ON/OFF" button b for 2 to 3 seconds to switch on the Bluetooth Speaker module.

Voice reminder after the Bluetooth Speaker being activated:

1. When the Bluetooth Speaker module is on, voice indicator will say "Hello, This system is ON.

Enter pairing mode".

2. When pairing is completed, the voice indicator will say "Connected".

3. When it is disconnected, the voice indicator will say "Disconnected, Enter pairing mode".

4. When the Bluetooth Speaker cannot be connected successfully, the voice indicator will say

"Enter pairing mode".

5. Press and hold the "ON/OFF" button b again to switch o the Bluetooth Speaker module, the

voice indicator will say "Bye Bye".

6. When the battery is low, the voice indicator will say "Low Battery".

If the Bluetooth Speaker module did not pair with any devices, the voice indicator will say "Enter

pairing mode" every 3 minutes until the module is paired.

If the Bluetooth Speaker module cannot pair with any devices within 15 minutes, the voice

indicator will say "Bye Bye" and switch o the unit automatically.

6. To disconnect the Bluetooth Speaker connection by holding the "ON/OFF" button b for 2 seconds.

7. When the Flashlight / Bluetooth Speaker at low battery level, the voice indicator will say "Low Battery"

to remind the unit needs to be re-charged.

8. Remove the USB charger cover and connect with the USB cable to charge the unit. The unit is

charging if the green / red light c flashing alternatively. For example, it will take around 7 hours to

fully re-charge a 1300mAh Ni-MH battery and the green light is on when the unit is being fully

charged.

Modular Light

LUMO150B

PAGE 2/4