Important Directions For Use; Appropriate Use; Introduction; Areas Of Use And Application - Bosch REXROTH IndraDrive Applications Manual
Hide thumbs
Also See for REXROTH IndraDrive:
- Project planning manual (128 pages) ,
- Troubleshooting manual (437 pages) ,
- Instruction manual (26 pages)
Table of Contents
DOK-INDRV*-MLD-APPLI**-AW02-EN-P
Rexroth IndraDrive Rexroth IndraMotion MLD Application Examples
2
Important Directions for Use
2.1
Appropriate Use
2.1.1
Introduction
2.1.2
Areas of Use and Application
LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01
Rexroth products represent state-of-the-art developments and manufacturing.
They are tested prior to delivery to ensure operating safety and reliability.
WARNING
The products have been designed for use in the industrial environment and may
only be used in the appropriate way. If they are not used in the appropriate way,
situations resulting in property damage and personal injury can occur.
Rexroth as manufacturer is not liable for any damages resulting
from inappropriate use. In such cases, the guarantee and the right
to payment of damages resulting from inappropriate use are forfei‐
ted. The user alone carries all responsibility of the risks.
Before using Rexroth products, make sure that all the pre-requisites for an ap‐
propriate use of the products are satisfied:
●
Personnel that in any way, shape or form uses our products must first read
and understand the relevant safety instructions and be familiar with ap‐
propriate use.
●
If the products take the form of hardware, then they must remain in their
original state, in other words, no structural changes are permitted. It is not
permitted to decompile software products or alter source codes.
●
Do not mount damaged or faulty products or use them in operation.
●
Make sure that the products have been installed in the manner described
in the relevant documentation.
Drive controllers made by Rexroth are designed to control electrical motors and
monitor their operation.
Control and monitoring of the Drive controllers may require additional sensors
and actors.
The drive controllers may only be used with the accessories and
parts specified in this documentation. If a component has not been
specifically named, then it may neither be mounted nor connected.
The same applies to cables and lines.
Operation is only permitted in the specified configurations and com‐
binations of components using the software and firmware as speci‐
fied in the relevant Functional Descriptions.
Drive controllers have to be programmed before commissioning, making it pos‐
sible for the motor to execute the specific functions of an application.
Drive controllers of the Rexroth IndraDrive line have been developed for use in
single- and multi-axis drive and control tasks.
To ensure application-specific use of Drive controllers, device types of different
drive power and different interfaces are available.
Bosch Rexroth AG
Important Directions for Use
Personal injury and property damage caused
by incorrect use of the products!
5/97
Hide quick links:
Table of Contents
