Ccd Slave Axis - Bosch REXROTH IndraDrive Applications Manual

Hide thumbs Also See for REXROTH IndraDrive:

Table of Contents

DOK-INDRV*-MLD-APPLI**-AW02-EN-P

Rexroth IndraDrive Rexroth IndraMotion MLD Application Examples

7.2.3

CCD Slave Axis

Enabling of Functional Packages

Settings for Operation Mode "Elec‐

tronic Motion Profile"

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

Synchronous Multi-Axis Motion With Virtual Master Axis

Again starting from the completion of the action "load basic parameters", make

the following settings for the CCD slave axes.

This application example requires the base package "Closed-Loop" and the

enabling of the optional functional package "Synchronization".

It is only allowed to enable licensed functional packages!

Fig.7-11:

IndraWorks Dialog to Enable the Required Functional Packages for the

CCD Slave Axis

Material feed is to take place from the CCD slave axis which is operated in the

"electronic motion profile" mode. In the CCD slave axis, make the settings

shown in the IndraWorks dialog below for this application example and this

operation mode.

Bosch Rexroth AG

61/97

Table of Contents