Cisco ONS 15501 User Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Amplifier
  5. ONS 15501
  6. User manual
Cisco ONS 15501 User Manual

Cisco ONS 15501 User Manual

Hide thumbs
Table of Contents

Quick Links

Cisco ONS 15501 User Guide
Release 1.0
February 2002
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 526-4100
Customer Order Number: DOC-7814134=
Text Part Number: 78-14134-01
Table of Contents
loading

Related Manuals for Cisco ONS 15501

Summary of Contents for Cisco ONS 15501

  • Page 1 Cisco ONS 15501 User Guide Release 1.0 February 2002 Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 Customer Order Number: DOC-7814134= Text Part Number: 78-14134-01...
  • Page 2 You can determine whether your equipment is causing interference by turning it off. If the interference stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment causes interference to radio or television reception, try to correct the interference by using one or more of the following measures: •...

  • Page 3: Table Of Contents

    High Maximum Output Power Network Management Cisco ONS 15501 Applications Point-to-Point Topologies Ring Topologies Adding or Dropping Wavelengths Adjusting to Span Loss Changes Cisco ONS 15501 Front Panel Cisco ONS 15501 LED Alarm Definitions Cisco ONS 15501 User Guide 78-14134-01, Release 1.0...
  • Page 4 Contents 2 2 F e b r u a r y 2 0 0 2 Installing the Cisco ONS 15501 Creating a Site Log Required Tools and Parts Installation Checklist Rack-Mounting the Chassis Optical Connection DC Power Connection Grounding the Chassis...
  • Page 5 4-32 resetmeantrig 4-33 restore 4-35 setgainmean 4-36 setgaintrig 4-37 setinpwrmean 4-38 setinpwrtrig 4-39 set-master-pwd 4-40 setoutsigpwrmean 4-41 setoutsigpwrtrig 4-42 settempmean 4-43 settemptrig 4-44 set-time 4-45 set-user-pwd 4-47 show-trap 4-48 status 4-49 Cisco ONS 15501 User Guide 78-14134-01, Release 1.0...
  • Page 6 Technical Support Technical Specifications Cisco ONS 15501 Optical Specifications Cisco ONS 15501 Electrical Specifications Cisco ONS 15501 Mechanical Specifications Cisco ONS 15501 DC Input Power Requirements Connector Pinouts Time Zone Codes Translated Safety Warnings Wrist Strap Warning Restricted Area Warning...

  • Page 7: Preface

    2 2 F e b r u a r y 2 0 0 2 Preface This preface describes the audience, organization, and conventions for the Cisco ONS 15501 User Guide. It also provides information about how to obtain related documentation and technical assistance.

  • Page 8: Conventions

    éviter les accidents. Pour prendre connaissance des traductions d’avertissements figurant dans cette publica- tion, consultez le document Regulatory Compliance and Safety Information (Confor- mité aux règlements et consignes de sécurité) qui accompagne cet appareil. Cisco ONS 15501 User Guide viii 78-14134-01, Release 1.0...
  • Page 9 Se förklaringar av de varningar som förkommer i denna publikation i dokumentet Regula- tory Compliance and Safety Information (Efterrättelse av föreskrifter och säkerhetsin- formation), vilket medföljer denna anordning. Cisco ONS 15501 User Guide 78-14134-01, Release 1.0...

  • Page 10: Related Documentation

    The following sections explain how to obtain documentation from Cisco Systems. World Wide Web You can access the most current Cisco documentation on the World Wide Web at the following URL: http://www.cisco.com Translated documentation is available at the following URL: http://www.cisco.com/public/countries_languages.shtml...

  • Page 11: Documentation Feedback

    Technical Assistance Center The Cisco TAC is available to all customers who need technical assistance with a Cisco product, technology, or solution. Two types of support are available through the Cisco TAC: the Cisco TAC Web Site and the Cisco TAC Escalation Center.

  • Page 12: Cisco Tac Web Site

    Cisco TAC Web Site. The Cisco TAC Web Site requires a Cisco.com login ID and password. If you have a valid service contract but do not have a login ID or password, go to the following URL to register: http://www.cisco.com/register/...

  • Page 13: Product Overview

    The unit provides excellent gain flatness for the cascading of amplifiers in DWDM applications. The Cisco ONS 15501 is physically designed to fit into a 19-inch, 23-inch, or ETSI equipment rack, with front, middle, or rear mounting capability. It is equipped with connectors for optional monitoring either locally or remotely.

  • Page 14: Optical Specifications

    Chapter 1 Product Overview Optical Specifications Optical Specifications Table 1-1 lists the Cisco ONS 15501 optical specifications. For other technical specifications, see Appendix A, “Technical Specifications.” Table 1-1 Cisco ONS 15501 Optical Specifications Description Specification Wavelength range 1530 to 1563 nm...

  • Page 15: Constant Gain Flatness

    Optimized Automatic Gain Control The Cisco ONS 15501 has a wide input power range of 0 to -29 dBm, over which it maintains gain flatness as well as a low noise figure across the entire C band. The Cisco ONS 15501 maintains a high level of precision, as well as speed, which allows it to be used as a booster, inline or preamplifier, thus reducing sparing expenses.

  • Page 16: Transient Suppression

    1 dB. Low Noise Figure The low noise characteristics of the Cisco ONS 15501 allow over six amplifiers to be cascaded and still achieve an excellent OSNR at input powers as low as –21 dBm per channel. This enables seamless migration to higher speeds beyond OC-48 and to a larger number of channels.

  • Page 17: Cisco Ons 15501 Applications

    When the span length greatly exceeds 17 dB, an inline amplifier might also be required. Because of the wide input power range (-29 to 0 dBm) of the Cisco ONS 15501, trunk attenuation is typically also necessary, especially when the unit is used as a post-amplifier. For instance, when the per channel output power from the node is -5 dBm in a 32-channel system, the total output power from the node is +10 dBm.
  • Page 18 (for example, -15 dBm in a 32-channel system). This process of optical power equalization is necessary to obtain better OSNR. Cisco ONS 15501 User Guide 78-14134-01, Release 1.0...

  • Page 19: Adding Or Dropping Wavelengths

    OADM and the EDFA, is also an effective method. The Cisco ONS 15501 is capable of supporting either approach, and its wide input range (-29 to 0 dBm) makes it an ideal amplifier for a broad array of ring network designs.

  • Page 20: Cisco Ons 15501 Led Alarm Definitions

    The green POWER LED turns on or off to reflect the following conditions: • On: An internal power supply is within tolerance (the Cisco ONS 15501 is powered normally). – Off: An internal power supply is not present or is out of tolerance.
  • Page 21 Chapter 1 Product Overview Cisco ONS 15501 Front Panel The red FAIL LED turns on or off to reflect the following conditions: • – On: The pump laser bias, pump laser temperature, or power supply is out of tolerance. This LED indicates a major internal failure, such as an overtemperature condition or a failure in the pump laser or power supply.
  • Page 22 Chapter 1 Product Overview Cisco ONS 15501 Front Panel Cisco ONS 15501 User Guide 1-10 78-14134-01, Release 1.0...

  • Page 23: Creating A Site Log

    We recommend keeping a site log (or a section of a larger site log) to record all actions related to the Cisco ONS 15501. The log should be kept near the chassis where anyone who works on the equipment can access it. Site log entries might include the following: Background information.

  • Page 24: Required Tools And Parts

    Installation Checklist The installation checklist includes the procedures for initial hardware installation of the Cisco ONS 15501. Mark the entries as you complete each procedure. Make a copy of this checklist, as needed, for the site log. Installation checklist for site:...

  • Page 25: Rack-Mounting The Chassis

    2 2 F e b r u a r y 2 0 0 2 Rack-Mounting the Chassis The Cisco ONS 15501 mounts in a standard 19-inch, 23-inch, or ETSI equipment rack and occupies 1RU (one rack unit is 1.75 inches) of vertical space. The unit is designed for front, middle, or rear mounting.

  • Page 26: Dc Power Connection

    Install a power conditioner, if necesary, to ensure proper voltages and power levels in the source voltage. Caution Use only the hardware provided with the Cisco ONS 15501. Failure to use the provided hardware may result in unintended damage. If hardware is lost, contact Cisco Systems for a replacement. Cisco ONS 15501 User Guide...

  • Page 27: Grounding The Chassis

    Test for proper frame ground using the ohmmeter section of a digital voltmeter. Place one prod on the Step 6 Cisco ONS 15501 and the other on the frame grounding bus to which the grounding lug and grounding wire is connected. Observe for a zero-resistance ground.

  • Page 28: Communication Connections

    Installing the Cisco ONS 15501 Communication Connections 2 2 F e b r u a r y 2 0 0 2 Figure 2-3 Connecting the Cisco ONS 15501 to a DC Power Source -48V RET -48V RET Redundant DC power...

  • Page 29: Setting Up Alarm Contacts

    Definitions” section on page 1-8. Installation Commands You can connect to a Cisco ONS 15501 locally using a serial connection or remotely through SNMP. See “Configuring Local Serial Communication” section on page 3-1 for instructions on setting up either of these options. After you establish a connection, use the following commands to complete the hardware installation.

  • Page 30: Installation Commands

    Chapter 2 Installing the Cisco ONS 15501 Installation Commands 2 2 F e b r u a r y 2 0 0 2 Cisco ONS 15501 User Guide 78-14134-01, Release 1.0...

  • Page 31: Configuring The Cisco Ons 15501

    Connect the DB-9 end of the RS-232 data cable to the COM port on the PC or laptop. Step 1 Connect the other end of the RS-232 data cable to the RS-232 serial port on the Cisco ONS 15501 front Step 2 panel.

  • Page 32: Configuring A Basic System

    CLI prompts the user for the default master password and the new master password. The default master password is edfa1. Monitoring Alarms and Traps To configure the software on the Cisco ONS 15501 for console port-based monitoring, follow these steps: Enter show-trap to display the traps of the system.

  • Page 33: Upgrading The Flash Image

    Step 5 Enter reboot to reboot the system. Configuring Remote Communication To establish a remote communication link with a Cisco ONS 15501 through Telnet or SNMP, the unit must first be properly installed and powered up. Configuring for Telnet To configure the Cisco ONS 15501 for Telnet, follow these steps: Connect the Cisco ONS 15501 to an Ethernet LAN using a standard RJ-45 cable.

  • Page 34: Configuring For Snmp

    Enter del-snmp-mgr manager-ip to delete an SNMP manager entry. Alarm Contact Closures The Cisco ONS 15501 provides a front panel, single form C, discrete external alarm output. (See the “Cisco ONS 15501 Front Panel” section on page 1-7 for additional information.) The external alarm output is through the eight wires of an RJ-45 connector.

  • Page 35: Command Reference

    C H A P T E R Command Reference This chapter describes the commands used in the Cisco ONS 15501 environment. The commands are listed alphabetically. To display a list of available commands, enter help. To obtain the syntax for any individual command, Note enter help [command].

  • Page 36: Add-Snmp-Com

    Modification EDFA 1.0 This command was introduced. Usage Guidelines The Cisco ONS 15501 supports up to 16 SNMP community strings. Examples The following example shows how to add an SNMP community string to the system. edfa > add-snmp-com abcd Related Commands...

  • Page 37: Add-Snmp-Mgr

    This command was introduced. Usage Guidelines The Cisco ONS 15501 uses the SNMP manager address to direct SNMP trap and inform notifications. No notifications are sent unless at least one SNMP manager address is configured. The Cisco ONS 15501 accepts a maximum of 10 IP managers.

  • Page 38: Alarm

    This command was introduced. Examples The following example shows how to display a list of alarms in the system. edfa > alarm Alarm: Temperature - Unacceptable Alarm: Equipment - Alarm: Input Signal - Low Cisco ONS 15501 User Guide 78-14134-01, Release 1.0...

  • Page 39: Boot-Bank

    The following example shows how to modify the active boot bank. edfa > boot-bank 2 The following example shows how to display the active boot bank. edfa > boot-bank Active flash bank number: 1 Planned flash bank number: 1 Cisco ONS 15501 User Guide 78-14134-01, Release 1.0...

  • Page 40: Del-Snmp-Com

    The following example shows how to delete an SNMP community string on the system. edfa > del-snmp-com abcd Related Commands Command Description add-snmp-com Adds an SNMP community string to the system. get-snmp-com Displays an SNMP community string on the system. Cisco ONS 15501 User Guide 78-14134-01, Release 1.0...

  • Page 41: Del-Snmp-Mgr

    EDFA 1.0 This command was introduced. Usage Guidelines The Cisco ONS 15501 uses the SNMP manager address to direct SNMP trap and inform notifications. No notifications are sent unless at least one SNMP manager address is configured. Examples The following example shows how to delete an SNMP manager entry on the system.

  • Page 42: Ethmode

    The following example shows how to display the Ethernet boot mode. edfa > ethmode ethernet init-mode 4 The following example shows how to modify the Ethernet boot mode. edfa > ethmode 3 ethernet init-mode updated to 3 Cisco ONS 15501 User Guide 78-14134-01, Release 1.0...

  • Page 43: Gain

    Sets the signal gain and alarm mean level. setgaintrig Sets the gain alarm trigger level. Cisco ONS 15501 User Guide 78-14134-01, Release 1.0...

  • Page 44: Gainmean

    EDFA 1.0 This command was introduced. Usage Guidelines The value for configured Cisco ONS 15501 signal gain and alarm mean level is displayed in dB. Examples The following example shows how to display the configured signal gain and alarm mean level.

  • Page 45: Gaintrig

    Modification EDFA 1.0 This command was introduced. Usage Guidelines The value for Cisco ONS 15501 gain alarm trigger level is displayed in dB. Examples The following example shows how to display the gain alarm trigger level. edfa > gaintrig 1.00 (dB)

  • Page 46: Get-Snmp-Com

    A list of the SNMP community string ======================================= private abcd Related Commands Command Description add-snmp-com Adds an SNMP community string to the system. del-snmp-com Deletes an SNMP community string on the system. Cisco ONS 15501 User Guide 4-12 78-14134-01, Release 1.0...

  • Page 47: Get-Snmp-Mgr

    > get-snmp-mgr 10.1.2.71 A list of the SNMP manager IP addresses =========================================== 209.128.68.147 10.1.2.71 Related Commands Command Description add-snmp-mgr Adds or modifies an SNMP manager entry. del-snmp-mgr Deletes an SNMP manager entry. Cisco ONS 15501 User Guide 4-13 78-14134-01, Release 1.0...

  • Page 48: Help

    USAGE: help [ ] If there is a command specified, the corresponding help for that command will be printed. Without any command specified, a list of all commands will be shown. Cisco ONS 15501 User Guide 4-14 78-14134-01, Release 1.0...

  • Page 49: Hide-Trap

    Release Modification EDFA 1.0 This command was introduced. Examples The following example shows how to hide the trap message. edfa > hide-trap Related Commands Command Description show-trap Displays the trap message. Cisco ONS 15501 User Guide 4-15 78-14134-01, Release 1.0...

  • Page 50: Host-Config

    The following example shows how to display the current host name. edfa > host-config edfa The following example shows how to modify the current host name. edfa > host-config ADM-EAST ADM-EAST > Cisco ONS 15501 User Guide 4-16 78-14134-01, Release 1.0...

  • Page 51: Inpwr

    Sets the optical input alarm mean level. setinpwrtrig Sets the optical input alarm trigger level. Cisco ONS 15501 User Guide 4-17 78-14134-01, Release 1.0...

  • Page 52: Inpwrmean

    Sets the optical input alarm mean level. setinpwrtrig Sets the optical input alarm trigger level. Cisco ONS 15501 User Guide 4-18 78-14134-01, Release 1.0...

  • Page 53: Inpwrtrig

    Sets the optical input alarm mean level. setinpwrtrig Sets the optical input alarm trigger level. Cisco ONS 15501 User Guide 4-19 78-14134-01, Release 1.0...

  • Page 54: Ip-Config

    > ip-config 10.1.2.221 255.255.255.0 10.1.2.1 The following example shows how to display or modify the IP address, IP subnet mask and IP default gateway. edfa > ip-config 192.168.0.10 255.255.255.240 192.168.0.1 Cisco ONS 15501 User Guide 4-20 78-14134-01, Release 1.0...

  • Page 55: Logout

    This command has no other arguments or keywords. Defaults None Command Types Does not change configuration Command Modes User password protected Command History Release Modification EDFA 1.0 This command was introduced. Cisco ONS 15501 User Guide 4-21 78-14134-01, Release 1.0...

  • Page 56: Ntp

    The following example shows how to display the current configuration of the NTP. edfa > ntp ON, 209.128.68.149, 209.128.68.147 Related Commands Command Description ntp-ip Modifies the IP addresses of the NTP server. Cisco ONS 15501 User Guide 4-22 78-14134-01, Release 1.0...

  • Page 57: Ntp-Ip

    The following example shows how to display the current IP addresses of the primary and secondary NTP servers. edfa > ntp-ip 209.128.68.149, 209.128.68.147 Related Commands Command Description Enables or disables the NTP for the system Cisco ONS 15501 User Guide 4-23 78-14134-01, Release 1.0...

  • Page 58: Optoutpwr

    This command was introduced. Usage Guidelines The value for optical output power is displayed in dBm. Examples The following example shows how to display the optical output power . edfa > optoutpwr -28.53 (dBm) Cisco ONS 15501 User Guide 4-24 78-14134-01, Release 1.0...

  • Page 59: Outattn

    This command was introduced. Usage Guidelines The value for optical output attenuation is displayed in dB. Examples The following example shows how to display the measured output attenuation. edfa > outattn 0.00 (dB) Cisco ONS 15501 User Guide 4-25 78-14134-01, Release 1.0...

  • Page 60: Outsigpwr

    Sets the output signal alarm mean level. setoutsigpwrtrig Sets the output signal alarm trigger level. Cisco ONS 15501 User Guide 4-26 78-14134-01, Release 1.0...

  • Page 61: Outsigpwrmean

    Sets the output signal alarm mean level. setoutsigpwrtrig Sets the output signal alarm trigger level. Cisco ONS 15501 User Guide 4-27 78-14134-01, Release 1.0...

  • Page 62: Outsigpwrtrig

    Sets the output signal alarm mean level. setoutsigpwrtrig Sets the output signal alarm trigger level. Cisco ONS 15501 User Guide 4-28 78-14134-01, Release 1.0...

  • Page 63: Ping

    The following example shows how to ping an IP address. edfa > ping 192.168.0.1 PING 192.168.0.1 (192.168.0.1): 56 data bytes --- 192.168.0.1 ping statistics --- 5 packets transmitted, 0 packets received, 100% packet loss Cisco ONS 15501 User Guide 4-29 78-14134-01, Release 1.0...

  • Page 64: Ps1

    User password protected Command History Release Modification EDFA 1.0 This command was introduced. Examples The following example shows how to display the voltage of power supply number one. edfa > ps1 -49.51 (vDC) Cisco ONS 15501 User Guide 4-30 78-14134-01, Release 1.0...

  • Page 65: Ps2

    User password protected Command History Release Modification EDFA 1.0 This command was introduced. Examples The following example shows how to display the voltage of power supply number two. edfa > ps2 -49.43 (vDC) Cisco ONS 15501 User Guide 4-31 78-14134-01, Release 1.0...

  • Page 66: Reboot

    Chapter 4 Command Reference reboot reboot To reboot the software on the Cisco ONS 15501, use the reboot command. reboot Syntax Description This command has no other arguments or keywords. Defaults The system reboots using the same Flash image as previously used.

  • Page 67: Resetmeantrig

    Displays the output signal alarm mean level. outsigpwrtrig Displays the output signal alarm trigger level. setgainmean Sets the signal gain and alarm mean level. setgaintrig Sets the gain alarm trigger level. Cisco ONS 15501 User Guide 4-33 78-14134-01, Release 1.0...
  • Page 68 Sets the internal case temperature alarm mean level. settemptrig Sets the internal case temperature alarm trigger level. tempmean Displays the internal case temperature alarm mean level. temptrig Displays the internal case temperature alarm trigger level. Cisco ONS 15501 User Guide 4-34 78-14134-01, Release 1.0...

  • Page 69: Restore

    The command does not reset any of the module settings; resetmeantrig must be used for that purpose. The user is recommended to reboot the system after utilizing this command; the default settings are not activated until the system is rebooted. Cisco ONS 15501 User Guide 4-35 78-14134-01, Release 1.0...

  • Page 70: Setgainmean

    Sets the gain alarm trigger level. Cisco ONS 15501 User Guide 4-36 78-14134-01, Release 1.0...

  • Page 71: Setgaintrig

    Sets the signal gain and alarm mean level. Cisco ONS 15501 User Guide 4-37 78-14134-01, Release 1.0...

  • Page 72: Setinpwrmean

    Sets the optical input alarm trigger level. Cisco ONS 15501 User Guide 4-38 78-14134-01, Release 1.0...

  • Page 73: Setinpwrtrig

    Sets the optical input alarm mean level. Cisco ONS 15501 User Guide 4-39 78-14134-01, Release 1.0...

  • Page 74: Set-Master-Pwd

    The following example shows how to modify the master password for the system. edfa > set-master-pwd Old Master Password: New Password: New Password: Related Commands Command Description set-user-pwd Sets a new user password for the system. Cisco ONS 15501 User Guide 4-40 78-14134-01, Release 1.0...

  • Page 75: Setoutsigpwrmean

    Sets the output signal alarm trigger level. Cisco ONS 15501 User Guide 4-41 78-14134-01, Release 1.0...

  • Page 76: Setoutsigpwrtrig

    Sets the output signal alarm mean level. Cisco ONS 15501 User Guide 4-42 78-14134-01, Release 1.0...

  • Page 77: Settempmean

    Sets the internal case temperature alarm trigger level. temp Displays the internal case temperature level. tempmean Displays the internal case temperature alarm mean level. temptrig Displays the internal case temperature alarm trigger level. Cisco ONS 15501 User Guide 4-43 78-14134-01, Release 1.0...

  • Page 78: Settemptrig

    Sets the internal case temperature alarm mean level. temp Displays the internal case temperature level. tempmean Displays the internal case temperature alarm mean level. temptrig Displays the internal case temperature alarm trigger level. Cisco ONS 15501 User Guide 4-44 78-14134-01, Release 1.0...

  • Page 79: Set-Time

    Appendix C, “Time Zone Codes,” for a list of time zones and correlating abbreviations. The system will accept entries entirely in upper case, such as PST, or entirely in lower case, such as pst. Cisco ONS 15501 User Guide 4-45 78-14134-01, Release 1.0...
  • Page 80 Time zone is set to PST Fri Feb 08 01:02:30 2002 PST Related Commands Command Description time Displays the time of the system. timezone Displays or modifies the timezone of the system. Cisco ONS 15501 User Guide 4-46 78-14134-01, Release 1.0...

  • Page 81: Set-User-Pwd

    The following example shows how to set the time of the system. edfa > set-user-pwd Old User Password: New Password: New Password: Related Commands Command Description set-master-pwd Sets a new master password for the system. Cisco ONS 15501 User Guide 4-47 78-14134-01, Release 1.0...

  • Page 82: Show-Trap

    Release Modification EDFA 1.0 This command was introduced. Examples The following example shows how to display the trap message. edfa > show-trap Related Commands Command Description show-trap Hides the trap message. Cisco ONS 15501 User Guide 4-48 78-14134-01, Release 1.0...

  • Page 83: Status

    Input Power -46.03 -28.00 2.00 Optical Output Power -28.53 Temperature 85.61 29.00 29.00 Optical Gain 17.50 17.00 2.00 Output Attenuation 0.00 Output Signal Power -28.53 1.00 18.00 ================================================================== Cisco ONS 15501 User Guide 4-49 78-14134-01, Release 1.0...

  • Page 84: Sw-Download

    > sw-download ftp 209.128.68.145 opruser oprpassword /home/load/bin EdfaImg.0.2 2 The following example shows how to download an image via tftp and burn it to a specified Flash bank. edfa > sw-download tftp 209.128.68.145 EdfaImg.0.2 2 Cisco ONS 15501 User Guide 4-50 78-14134-01, Release 1.0...

  • Page 85: Sys-Info

    Serial number: kim420 MAC Address: 00016447101F Firmware version: 0.7 Firmware build date: Thu Nov 29 11:15:59 PST 2001 Firmware update date: to be implemented-1 Software in various Banks: 1)linux.bin.233 2)/linux.bin.90.cisco 3)/linux.bin.90.cisco Cisco ONS 15501 User Guide 4-51 78-14134-01, Release 1.0...

  • Page 86: Temp

    Sets the internal case temperature alarm mean level. settemptrig Sets the internal case temperature alarm trigger level. tempmean Displays the internal case temperature alarm mean level. temptrig Displays the internal case temperature alarm trigger level. Cisco ONS 15501 User Guide 4-52 78-14134-01, Release 1.0...

  • Page 87: Tempmean

    Sets the internal case temperature alarm mean level. settemptrig Sets the internal case temperature alarm trigger level. temp Displays the internal case temperature level. temptrig Displays the internal case temperature alarm trigger level. Cisco ONS 15501 User Guide 4-53 78-14134-01, Release 1.0...

  • Page 88: Temptrig

    Sets the internal case temperature alarm mean level. settemptrig Sets the internal case temperature alarm trigger level. temp Displays the internal case temperature level. tempmean Displays the internal case temperature alarm mean level. Cisco ONS 15501 User Guide 4-54 78-14134-01, Release 1.0...

  • Page 89: Time

    The following example shows how to display the time of the system. edfa > time Thu Dec 13 19:29:02 2001 GMT Related Commands Command Description set-time Sets the time of the system. timezone Displays or modifies the timezone of the system. Cisco ONS 15501 User Guide 4-55 78-14134-01, Release 1.0...

  • Page 90: Timeout

    The following example shows how to modify the timeout period setting. edfa > timeout 500 The following example shows how to view the timeout period setting. edfa > timeout Timeout period is 500 seconds Cisco ONS 15501 User Guide 4-56 78-14134-01, Release 1.0...

  • Page 91: Timezone

    The following example shows how to modify the timezone of the system. edfa > timezone PST Related Commands Command Description set-time Sets the time of the system. time Displays the time of the system. Cisco ONS 15501 User Guide 4-57 78-14134-01, Release 1.0...
  • Page 92 Chapter 4 Command Reference timezone Cisco ONS 15501 User Guide 4-58 78-14134-01, Release 1.0...

  • Page 93: Troubleshooting

    • Basic Diagnostic Procedures When a problem occurs over the network, use the following three basic diagnostic procedures to determine if the Cisco ONS 15501 is the source of the problem: Verify the power connection. • Verify the Ethernet connection.

  • Page 94: Isolating The Problem

    See Appendix B, “Connector Pinouts.” Isolating the Problem The key to troubleshooting the Cisco ONS 15501 is to isolate the problem to a specific component. When troubleshooting, consider the following components of the Cisco ONS 15501: • Power supply — Includes the power input wiring and associated switches and fuses.

  • Page 95: Password Recovery

    Contact the Cisco Technical Assistance Center (TAC) immediately for assistance. If the Fail LED is red, then a major trouble condition exists in the Cisco ONS 15501 hardware. Contact the Cisco Technical Assistance Center (TAC) immediately for assistance.
  • Page 96 Chapter 5 Troubleshooting Technical Support Cisco ONS 15501 User Guide 78-14134-01, Release 1.0...

  • Page 97: Technical Specifications

    A P P E N D I X Technical Specifications This appendix describes the technical specifications for the Cisco ONS 15501. This appendix includes the following sections: Cisco ONS 15501 Optical Specifications, page A-1 • • Cisco ONS 15501 Electrical Specifications, page A-1 Cisco ONS 15501 Mechanical Specifications, page A-2 •...

  • Page 98: Cisco Ons 15501 Mechanical Specifications

    Humidity storage Up to 95 percent, noncondensing Connector type SC/UPC Cisco ONS 15501 DC Input Power Requirements Table A-3 lists the DC input power requirements of the Cisco ONS 15501. Table A-3 DC Input Power Supply Specifications Description Specification Power consumption 15W maximum;...

  • Page 99: Connector Pinouts

    A P P E N D I X Connector Pinouts Figure B-1 shows the pin configuration of the RS-232 DB-9 type connector and the Alarm Out RJ-45 connector. Cisco ONS 15501 User Guide 78-14134-01, Release 1.0...
  • Page 100 Pair 1: Loss of input power supply or power supply out of range Pair 2: Failure in the pump laser bias or pump laser temperature Pair 3: Loss of input signal or input signal power below threshold Pair 4: Undefined Cisco ONS 15501 User Guide 78-14134-01, Release 1.0...

  • Page 101: Time Zone Codes

    Atlantic Daylight Eastern Standard Eastern Daylight Central Standard Central Daylight Mountain Standard Mountain Daylight Pacific Standard Pacific Daylight Yukon Standard Yukon Daylight Hawaii Standard Hawaii Daylight Central Alaska AHST Alaska-Hawaii Standard Nome Cisco ONS 15501 User Guide 78-14134-01, Release 1.0...
  • Page 102 Japan Standard, USSR Zone 8 EAST Eastern Australian Standard EADT Eastern Australian Daylight Guam Standard, USSR Zone 9 New Zealand NZST New Zealand Standard NZDT New Zealand Daylight IDLE International Date Line East Cisco ONS 15501 User Guide 78-14134-01, Release 1.0...

  • Page 103: Translated Safety Warnings

    Warnung Zur Vermeidung einer Beschädigung der Karte durch elektrostatische Entladung während dieses Verfahrens ein Erdungsband am Handgelenk tragen. Bei Berührung der Rückwand mit der Hand oder einem metallenen Werkzeug besteht Elektroschock- gefahr. Cisco ONS 15501 User Guide 78-14134-01, Release 1.0...

  • Page 104: Restricted Area Warning

    L’accès aux zones de sécurité est sous le contrôle de l’autorité responsable de l’emplacement. Cisco ONS 15501 User Guide 78-14134-01, Release 1.0...

  • Page 105: Qualified Personnel Warning

    Ainoastaan koulutettu ja pätevä henkilökunta saa asentaa tai vaihtaa tämän laitteen. Tout installation ou remplacement de l'appareil doit être réalisé par du personnel Avertissement qualifié et compétent. Achtung Gerät nur von geschultem, qualifiziertem Personal installieren oder auswechseln las- sen. Cisco ONS 15501 User Guide 78-14134-01, Release 1.0...

  • Page 106: Dc Protection

    Dette produktet er avhengig av bygningens installasjon for beskyttelse mot kortslut- ning (overspenning). Påse at en oppført og godkjent sikring eller strømbryter, på 25 A, minimum 60 volt likestrøm, brukes på alle strømførende ledere. Cisco ONS 15501 User Guide 78-14134-01, Release 1.0...

  • Page 107: Disconnect Device Warning

    Um dispositivo de desconexão de fácil acesso deve ser incorporado a fiação do edifí- cio. ¡Advertencia! En el cableado del edificio se debe incorporar un dispositivo de desconexión que se encuentre accesible fácilmente. Varning! En lättillgänglig strömbrytare måste installeras i byggnadens ledningssystem. Cisco ONS 15501 User Guide 78-14134-01, Release 1.0...

  • Page 108: Laser Radiation Warning

    éstos con instrumentos ópticos. Varning! Osynlig laserstrålning kan avges från frånkopplade fibrer eller kontaktdon. Rikta inte blicken in i strålar och titta aldrig direkt på dem med hjälp av optiska instrument. Cisco ONS 15501 User Guide 78-14134-01, Release 1.0...

  • Page 109: I N D E X

    4-27 displaying list of 4-14 output signal power trigger 4-28 displaying syntax 4-14 output signal trigger 4-42 installation resetting to defaults 4-33 introductory signal gain mean 4-36 operational Cisco ONS 15501 User Guide IN-1 78-14134-01, Release 1.0...
  • Page 110 4-13 Ethernet grounding the chassis displaying or modifying boot modes Ethernet connection troubleshooting ethmode command help command 4-14 hide-trap command 4-15 host-config command 4-16 host name displaying or modifying 4-16 Cisco ONS 15501 User Guide IN-2 78-14134-01, Release 1.0...
  • Page 111 (table) SNMP front panel (table) network time protocol See NTP troubleshooting noise figure light emitting diodes. See LEDs. network design features local area network connector. See LAN connector. Cisco ONS 15501 User Guide IN-3 78-14134-01, Release 1.0...
  • Page 112 4-25 reboot output connector software 4-32 description (table) reboot command 4-32 output monitor connector remote communication description (table) set up output power resetmeantrig command 4-33 displaying 4-24 network design features Cisco ONS 15501 User Guide IN-4 78-14134-01, Release 1.0...
  • Page 113 4-56 burning images to Flash banks 4-50 timeout interval downloading images via ftp or tftp displaying or modifying 4-50 4-56 reboot timezone 4-32 span loss displaying or modifying 4-57 Cisco ONS 15501 User Guide IN-5 78-14134-01, Release 1.0...
  • Page 114 4-15 trigger levels displaying 4-49 troubleshooting alarm connections basic diagnostic procedures DC input power Ethernet connection LEDs password recovery variable gain network design features variable optical attenuation. See VOA. Cisco ONS 15501 User Guide IN-6 78-14134-01, Release 1.0...

Table of Contents