Related Manuals for Sony XC-ES50/50CE
Summary of Contents for Sony XC-ES50/50CE
- Page 1 CCD B/W CAMERA MODULE XC-ES50/50CE XC-ES30/30CE XC-EI50/50CE XC-EI30/30CE User’s uide (Ver. 1.0) — English —...
-
Page 2: Table Of Contents
XC-E series Table of Contents OUTLINE ... 1 MAIN FEATURES ... 1 SYSTEM CONFIGURATION ... 2 SPECIFICATIONS COMPARISON ... 2 MAIN SPECIFICATIONS ... 3 CONNECTION DIAGRAM ... 4 LOCATION OF PARTS AND OPERATION ... 5 PHASE CONDITIONS OF EXTERNAL SYNCHRONIZATION ... 6 ELECTRONIC SHUTTER ... -
Page 3: Outline
Almost all switches are located on the rear panel. This feature permits easy setting after equipment is installed. Compact and lightweight Compared to the existing devices, the size and weight are reduced widely. Each of the XC-ES30/30CE, XC-ES50/50CE, XC-EI30/30CE, and XC-EI50/50CE can be used in applications using two-piece cameras. C-mount... -
Page 4: System Configuration
XC-E series SYSTEM CONFIGURATION The components making up the system based on XC-E series video camera are as follows. Video camera module XC-ES50/50CE XC-ES30/30CE XC-EI50/50CE XC-EI30/30CE Junction box Tripod adaptor JB-77 VCT-333I (Isolated type) SPECIFICATIONS COMPARISON XC-ST50 Image pickup device... -
Page 5: Main Specifications
Horizontal resolution XC-ES50/EI50, XC-ES30/EI30: XC-ES50CE/EI50CE, XC-ES30CE/EI30CE: Sensitivity XC-ES50/50CE: 400 lx F5,6 ( =ON, MIN Gain, XC-ES30/30CE: 400 lx F4 ( =ON, MIN Gain, XC-EI50/50CE: 400 lx F11 ( =OFF, MIN Gain, XC-EI30/30CE: 400 lx F8 ( =ON, MIN Gain, S/N ratio... -
Page 6: Connection Diagram
Tripod adaptor VCT-333I VCL-25Y-M LO-77ERK VCL-50Y-M Close-up ring kit Note : All functions of the XC-ES50/50CE, XC-ES30/30CE, XC-EI50/50CE, XC-EI30/30CE cannot be used when using DC-777/CE, DC-77RR/CE, and JB-77 is used. Refer to the table shown below. XC-ES50/50CE XC-ES30/30CE XC-EI50/50CE XC-EI30/30CE... -
Page 7: Location Of Parts And Operation
XC-E series 1 Lens mount section (C mount) A commercial C-mount lens as well as a Sony standard lens can be used. 2 Camera mounting reference hole (top) These screw holes are positionned with high precision related to CCD sensor. -
Page 8: Phase Conditions Of External Synchronization
XC-E series PHASE CONDITIONS OF EXTERNAL SYNCHRONIZATION External synchronization for each mode • For normal video/normal shutter Continuous HD/VD signal (should conform to EIA and CCIR frequencies in the timing shown in the figure below.) • For Restart Reset (RR)/external trigger shutter Continuous HD signal. -
Page 9: Electronic Shutter
ELECTRONIC SHUTTER Two types of electronic shutter are provided “normal shutter and external trigger shutter”. The electronic shutter speed and type can be set using the DIP switch on the rear panel. DIP switch on the rear panel Rear panel Normal shutter This mode provides continuous video output with the electronic shutter selected by switches to clearly capture a high-speed moving object. - Page 10 XC-E series ELECTRONIC SHUTTER External trigger shutter These modes are used to capture one image (one field) per trigger pulse. Set DIP switches 6, 7, and 8 on the rear panel to mode 1 or 2. (Refer to the table below.) When the trigger pulse width is 1/3 sec or more, the output signal is switched to a normal video signal.
- Page 11 ELECTRONIC SHUTTER Using trigger pulse width • Set DIP switches 1 to 4 on the rear panel to 0. • An arbitrary shutter speed can be obtained by setting the trigger pulse width to the range of 2 sec to 250 msec.
- Page 12 XC-E series ELECTRONIC SHUTTER When using a trigger pulse like shown below, set the TRIG polarity selector switch on the rear panel to – : A: 4.0 to 5.0 V 0 to 2.0 V T: 2 s to 1/4 s, 100 s to 1/4 s when setting the shutter speed using DIP switch Input impedance: 10 k or more The voltage and pulse width used are measured at pin 11 of a 12-pin multi-connector on the rear panel.
-
Page 13: Restart Reset (R.r)
RESTART RESET (R.R) The information on one screen can be extracted at any time by inputting a restart/reset signal (HD/VD) from the outside. To enter this mode, set DIP switches 6, 7, and 8 on the rear panel of a camera as shown in the table below. The setting is especially effective for the following operation. - Page 14 XC-E series RESTART RESET (R.R) Example 2 of long exposure EXT HD Continuous signal: 15.734 kHz (XC-ES50/ES30, XC-EI50/XC-EI30) Allowable frequency value 1%, EXT VD VD interval(T): 262.5H or more (XC-ES50/ES30, XC-EI50/XC-EI30) and less than 1 second (Recommended), Four or more VD pulses are required. Exposure time for Odd field Exposure time for Even field Video output...
-
Page 15: Frame Image Output With Strobe Light
FRAME IMAGE OUTPUT WITH STROBE LIGHT A full frame image with vertical resolution of 485 lines (XC-ST70) or 575 lines (XC-ST70CE) can be obtained with a strobe light by firing the strobe when the exposure time of the two fields overlap. Timing and conditions... -
Page 16: Output Waveform Timing Chart (Xc-Es50/Ei50/Es30/Ei30(Eia))
XC-E series OUTPUT WAVEFORM TIMING CHART Timing chart of horizontal output waveform 91 (6.36 s) output signal 69.8 ns Horizontal transfer stop period Optical black portion Horizontal blanking period (11.0 s) Camera video output signal (Typical value) HSYNC (1.47 s) (4.89 s) Timing chart of vertical output waveform (2:1 interlaced frame integration) Odd field (262.5 H) -
Page 17: Output Waveform Timing Chart (Xc-Es50/Ei50/Es30/Ei30(Eia))
OUTPUT WAVEFORM TIMING CHART (XC-ES50/EI50/ES30/EI30(EIA)) ELECTRONIC SHUTTER Timing chart of vertical output waveform (2:1 interlaced field integration) Odd field (262.5 H) 253.5 H output signal Empty transfer Camera Optical black portion video output signal Vertical blanking period (20 H) Even field (262.5 H) 253.5 H 242.5 Empty... - Page 18 XC-E series OUTPUT WAVEFORM TIMING CHART (XC-ES50CE/EI50CE/ES30CE/EI30CE (CCIR)) Timing chart of horizontal output waveform (6.91 s) output signal 70.5 ns Horizontal transfer stop period Optical black portion Horizontal blanking period (12.1 s) Camera video output signal (Typical value) HSYNC (1.48 s) (4.93 s) Timing chart of vertical output waveform (2:1 interlaced frame integration) Odd field (312.5 H)
- Page 19 OUTPUT WAVEFORM TIMING CHART (XC-ES50CE/EI50CE/ES30CE/EI30CE (CCIR)) ELECTRONIC SHUTTER Timing chart of vertical output waveform (2:1 interlaced field integration) Odd field (312.5 H) 7.5 H 305 H output signal Empty transfer Camera Optical black portion video output signal Vertical blanking period (25 H) Even field (312.5 H) 7.5 H 305 H...
-
Page 20: Sensor Read Clock Timing Chart
XC-E series SENSOR READ CLOCK TIMING CHART XC-ES30 Odd Field Even Field XC-ES30CE Odd Field Even Field 2.5 2.5 2.5 40.4 2.5 2.5 2.5 41.6 Unit : s Unit : s... - Page 21 SENSOR READ CLOCK TIMING CHART XC-ES50 Odd Field Even Field XC-ES50CE Odd Field Even Field 2.5 2.5 2.5 33.5 2.6 2.5 2.5 33.6 XC-E series Unit : s Unit : s...
- Page 22 XC-E series SENSOR READ CLOCK TIMING CHART XC-EI30 Odd Field Even Field XC-EI30CE Odd Field Even Field 2.5 2.5 2.5 33.5 2.6 2.6 2.6 33.6 Unit : s Unit : s...
- Page 23 SENSOR READ CLOCK TIMING CHART XC-EI50 Odd Field Even Field XC-EI50CE Odd Field Even Field 2.5 2.5 2.5 33.5 2.6 2.5 2.5 33.6 XC-E series Unit : s Unit : s...
-
Page 24: Timing Chart Of External Trigger Shutter - Mode 1
XC-E series TIMING CHART OF EXTERNAL TRIGGER SHUTTER - MODE 1 For setting the shutter speed using TRG width HD/VD input External trigger shutter operation Trigger Exposure time External HD External VD (Continuous T : T = Under –65 s to +10 s EXT-VD +10 s –65 s... - Page 25 TIMING CHART OF EXTERNAL TRIGGER SHUTTER - MODE 1 (NON-RESET MODE) For setting the shutter speed using TRG width HD/VD input External trigger shutter operation Trigger Exposure time External HD External VD (Single VD) T : T = 10 s to 100 ms Video out (XC-ES50CE/ES30CE, XC-EI50CE/EI30CE)
- Page 26 XC-E series TIMING CHART OF EXTERNAL TRIGGER SHUTTER - MODE 1 (NON-RESET MODE) For setting the shutter speed using TRG width No HD/VD input (Internal synchronization) External trigger shutter operation Trigger Exposure time Interrnal VD Video out 250H (XC-ES50/ES30, XC-EI50/EI30) 293H (XC-ES50CE/ES30CE, XC-EI50CE/EI30CE) 1: This is a signal input from the outside.
- Page 27 TIMING CHART OF EXTERNAL TRIGGER SHUTTER - MODE 1 (NON-RESET MODE) For setting the shutter speed using DIP switch HD/VD input Continuous HD/VD input External trigger shutter operation Trigger Exposure time External HD External VD (Continuous T : T = Under 10 ms Video out 250H (XC-ES50/ES30,...
- Page 28 XC-E series TIMING CHART OF EXTERNAL TRIGGER SHUTTER - MODE 1 (NON-RESET MODE) For setting the shutter speed using DIP switch HD/VD input Continuous HD input and single VD input External trigger shutter operation Trigger Exposure time External HD External VD (Single VD) T : T = 10 ms to 110 ms Video out...
- Page 29 TIMING CHART OF EXTERNAL TRIGGER SHUTTER - MODE 1 (NON-RESET MODE) For setting the shutter speed using DIP switch No HD/VD input (Internal synchronization) External trigger shutter operation Trigger Exposure time Interrnal VD T : T = Under 10 ms Video out 250H (XC-ES50/ES30,...
-
Page 30: Timing Chart Of External Trigger Shutter - Mode 2
XC-E series TIMING CHART OF EXTERNAL TRIGGER SHUTTER - MODE 2 For setting the shutter speed using TRG width External trigger shutter operation Trigger Exposure time Video out 1H to 2H 250H (XC-ES50/ES30, XC-EI50/EI30) 293H (XC-ES50CE/ES30CE, XC-EI50CE/EI30CE) 1: This is a signal input from the outside. The trigger interval should be trigger pulse width + 1 field + 2H period or more. - Page 31 TIMING CHART OF EXTERNAL TRIGGER SHUTTER - MODE 2 (RESET MODE) For setting the shutter speed using DIP switch External trigger shutter operation Trigger Exposure time Video out 250H (XC-ES50/ES30, XC-EI50/EI30) 293H (XC-ES50CE/ES30CE, XC-EI50CE/EI30CE) 1: This is a signal input from the outside. The trigger interval should be shutter speed (DIP switch) + 1 field + 2H period or more.
-
Page 32: Dimensions
XC-E series DIMENSIONS XC-ES50/50CE, XC-EI50/EI50CE XC-ES30/30CE, XC-EI30/EI30CE (XC-ES30 model) 2-M2 deep 2.5 4-M2 deep 2.5 (Unit :... -
Page 33: Spectral Response Characteristics
SPECTRAL RESPONSE CHARACTERISTICS (Typycal Value) XC-ES30 XC-ES30CE Wave Length [nm] Wave Length [nm] XC-E series 1000 1000... - Page 34 XC-E series SPECTRAL RESPONSE CHARACTERISTICS (Typycal Value) XC-ES50 XC-ES50CE Wave Length [nm] Wave Length [nm] 1000 1000...
- Page 35 SPECTRAL RESPONSE CHARACTERISTICS (Typycal Value) XC-EI30 XC-EI30CE Wave Length [nm] Wave Length [nm] XC-E series 1000 1000...
- Page 36 XC-E series SPECTRAL RESPONSE CHARACTERISTICS (Typycal Value) XC-EI50 XC-EI50CE Wave Length [nm] Wave Length [nm] 1000 1000...
-
Page 37: Various Lens Selection
VARIOUS LENS SELECTION The following shows the various lens specifications of the accessories available. XC-ES50/50CE, XC-ES30/30CE XC-EI50/50CE, XC-EI30/30CE compatibility Model name Focal distance (mm) Maximum aperture ratio Iris Operation Focus Field angle 1/2" CCD 1/3" CCD (Horizontal x vertical) MOD (mm) - Page 38 Technical information contained herein is for reference only and does not convey any license by any implication or otherwise under any intellectual property right or other right of Sony or third parties. Sony cannot assume responsibility for any right infringements arising out of the use of this information.
- Page 39 4-14-1 Asahi-cho, Atsugi-shi, Kanagawa, 243-0014 Japan Tel: +81-46-227-2346 Fax: +81-46-227-2347 Tel: +81-46-230-5873 Fax: +81-46-230-6243 http://www.sony.com/professional Sony Electronics Inc. 1 Sony Drive Park Ridge, NJ 07656 Tel: +1-800-686-7669 Canada Sony of Canada Ltd. 115 Gordon Baker Rd, Toronto, Ontario M2H 3R6 Tel: +1-416-499-1414 Fax: +1-416-497-1774 http://www.sony.co.jp/ISP/...