Motorola CPCI-6020 Installation And Use Manual
  1. Manuals
  2. Brands
  3. Motorola Manuals
  4. Motherboard
  5. CPCI-6020
  6. Installation and use manual

Motorola CPCI-6020 Installation And Use Manual

Compactpci single board computer
Hide thumbs
Table of Contents

Quick Links

Motorola CPCI-6020 Installation And Use Manual
Table of Contents
loading

Related Manuals for Motorola CPCI-6020

Summary of Contents for Motorola CPCI-6020

  • Page 1 Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...
  • Page 2 CPCI-6020 CompactPCI Single Board Computer Installation and Use 6806800A51C February 2008 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 3 Motorola reserves the right to revise this document and to make changes from time to time in the content hereof without obligation of Motorola to notify any person of such revision or changes.

  • Page 4: Table Of Contents

    CPCI-6020 Baseboard Preparation ........
  • Page 5 CPCI-6020 Baseboard Layout ........
  • Page 6 4.13 EIDE Interface ............. 100 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)
  • Page 7 Unpacking and Inspecting the RTM ..........131 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)
  • Page 8 Index ................165 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)
  • Page 9 Contents CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 10 Diagnostic Test Groups ..........115 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)
  • Page 11 Related Specifications ..........162 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)
  • Page 12 EIA-232-D DTE Ports 3 and 4 Configuration ....... 136 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)
  • Page 13 List of Figures CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 14: About This Manual

    This manual provides the information required to install and configure an CPCI-6020 Single Board Computer. Moreover, this manual provides specific preparation and installation information and data applicable to the board. The CPCI-6020 was previously offered as the MCP820 Single Board Computer.
  • Page 15 Non Volatile Random Access Memory OHCI Open Host Controller Interface Port Format PCI Host Bridge Physical Layer PCI Arbiter CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 16 Notation for software buttons to click on the screen and parameter description Repeated item for example node 1, node 2, ..., node 12 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 17 Legacy functionality remains via serial, Ethernet, and CompactFlash components. RoHS 6/6 compliancy. Editorial and style changes to manual. CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 18 In all your correspondence, please list your name, position, and company. Be sure to include the title, part number, and revision of the manual and tell how you used it. CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 19 About this Manual CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 20: Safety Notes

    Motorola intends to provide all necessary information to install and handle the product in this manual. Because of the complexity of this product and its various uses, we do not guarantee that the given information is complete.
  • Page 21 Use only shielded cables when connecting peripherals to assure that appropriate radio frequency emissions compliance is maintained. CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 22 Data Loss Although a command that allows erasing and reprogramming of flash memory is available, note that reprogramming any portion of the CPCI-6020 baseboard’s flash memory (Bank B) will erase everything currently contained in the baseboard flash, including the PPCBug debugger.
  • Page 23 Bent pins caused by improper installation or by inserting boards with damaged connectors could void the ECC warranty for the backplane or boards. CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 24 Inserting or removing modules in a non-hot swap chassis with the power applied may result in damage to the module components. The CPCI-6020-MCPTM-01 is not a hot swap board, but it may be installed in a hot swap chassis with power applied if the corresponding CPCI-6020 is removed from the front slot first.
  • Page 25 Safety Notes CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 26: Sicherheitshinweise

    Installieren Sie keine Ersatzteile oder führen Sie keine unerlaubten Veränderungen am Produkt durch, sonst verfällt die Garantie. Wenden Sie sich für Wartung oder Reparatur bitte an die für Sie zuständige Geschäftsstelle von Motorola. So stellen Sie sicher, dass alle sicherheitsrelevanten Aspekte beachtet werden.
  • Page 27 Warnung! Dies ist eine Einrichtung der Klasse A. Diese Einrichtung kann im Wohnbereich Funkstörungen verursachen. In diesem Fall kann vom Betreiber verlangt werden, angemessene Maßnahmen durchzuführen. CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 28 Obwohl das Board über ein Softwarekommando verfügt, welches das Löschen und die Neuprogrammierung eines Flashes erlaubt, beachten Sie, dass die Neuprogrammierung auch nur irgendeines Abschnittes des Flashes (Bank B) auf dem CPCI-6020 zur Löschung sämtlicher Inhalte des Flashes führt, einschliesslich des PPC-Debuggers.
  • Page 29 Überprüfen Sie daher das Produkt sowie die Backplane vor der Installation sorgältig und stellen Sie sicher, dass sich beide in einwandfreien Zustand befinden und keine Pins verbogen sind. CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 30 Beschädigung des Modules führen. Das CPCI-6020-MCPTM- 01 ist kein Hot-Swap-fägiges Board, aber es kann in ein Hot-Swap-fähiges Chassis installiert werden bei eingeschalteter Spannungsversorgung, unter der Voraussetzung, dass das zugehörige CPCI-6020-Board zuvor aus dem Slot an der Vorderseite entfernt wurde. Umweltschutz Entsorgen Sie alte Batterien und/oder Blades/Systemkomponenten/RTMs stets gemäß...
  • Page 31 Sicherheitshinweise CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 32: Introduction

    Introduction Features The following table summarizes the features of the CPCI-6020 single-board computers. Table 1-1 Features Feature Description Processor Single MPC7410 Processor Core Frequency up to 500 MHz for MPC7410 Bus Clock Frequency of 100 MHz Address and data bus parity...

  • Page 33: Standard Compliances

    16550-compatible async serial port (in Harrier) with RS-232 interface Processor JTAG Interface RESET and ABORT signals Access to processor bus via Mictor connector Standard Compliances The CPCI-6020 is designed to be CE compliant and to meet the following standard requirements. Table 1-2 Board Standard Compliances Standard Description...

  • Page 34: Ordering Information

    When ordering board variants or board accessories, use the order numbers given in the following tables. 1.3.1 Supported Board Models At the time of publication of this manual, the CPCI-6020 Single Board Computer is available in the configurations shown below. Memory is purchased separately according to the following table. Model Number...

  • Page 35: Board Accessories

    CPCI-6020-MCPTM-01 CPCI-6020 Rear Transition Module, 5E SIM232DCE6E Serial Interface Module, EIA-232-D DCE SIM232DTE6E Serial Interface Module, EIA-232-D DTE CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 36: Hardware Preparation And Installation

    One or two RAM500 SDRAM memory mezzanines per mezzanine site (two sites available) for a maximum of 2 GB of added memory. One CPCI-6020-MCPTM-01 rear transition module for support of the mapped I/O from the CPCI-6020 baseboard to the J3 and J5 CompactPCI connectors.

  • Page 37: Overview Of Start-Up Procedure

    Power up the system. Chapter 2, Hardware Preparation and Installation Ensure that the debugger initializes the Chapter 5, Firmware CPCI-6020 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 38: Equipment Required

    Transition module (CPCI-6020-MCPTM-01) and connecting cables CPCI-6020 modules are designed with front and rear panel I/O. Front panel I/O includes two USB ports, one Ethernet port (unless run to rear), a UART Port 0 and a PMC I/O port (if a PMC is installed).

  • Page 39: Table 2-2 Specifications

    Make sure the board is completely dry and there is no moisture on any surface before applying power. CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 40: Power Requirements

    The CPCI-6020 module draws +3.3VDC, +5VDC, VIO, +12VDC and -12VDC, with a voltage variation of -/+ 5% from the standard value, from the CompactPCI backplane connector J1. Typical power consumption of only the CPCI-6020 is approximately 15 W at +5VDC and 9 W at + 3.3VDC.

  • Page 41: Cpci-6020 Baseboard Preparation

    CPCI-6020 Baseboard Preparation The CPCI-6020 also provides configuration modification via software control by setting bits in control registers after installing the module in a system. The CPCI-6020 control registers are described in the CPCI-6020 CompactPCI Single Board Computer Programmer’s Reference Guide, and the Harrier Application Specific Integrated Circuit (ASIC) Programmer’s Reference...

  • Page 42: Jumper Settings

    2.8.1 Flash Bank Selection The CPCI-6020 contains one bank of 32 MB 16-bit flash memory soldered on-board (Bank A) and 1 MB of 16-bit socketed flash memory (Bank B). Bank A is 64-bits wide and Bank B is 16- bits wide. Bank B contains the on-board debugger and diagnostics, PPCBug.

  • Page 43: Harrier Power Up Configuration Header

    2.8.2 Harrier Power Up Configuration Header A 2 mm, 8-pin low profile header located on side 1 of the CPCI-6020 provides the means to change some of the Harrier power up configuration settings. The pin assignments for this header, along with the power up setting with the jumper on or off, are as follows (boards are...

  • Page 44: Enable/Disable Lockdown Of One Or More Flash Blocks For Bank A

    CPCI-6020 electronics or to the rear transition module. This may affect operation of any modules installed, such as: a PMC on the CPCI-6020 or a PIM or SIM on the rear transition module. For example, COM Port 3 and COM Port 4 on the rear transition module will not operate when the J18 jumper is installed.

  • Page 45: Pmc Module Installation

    The PCI mezzanine card (PMC) module mounts beside the RAM500 mezzanine on top of the CPCI-6020 baseboard. To install a PMC module, proceed as follows: 1. Attach an ESD strap to your wrist. Attach the other end of the ESD strap to the chassis as a ground.
  • Page 46 CPCI-6020 and the PMC front bezel and into rear standoffs. Tighten the screws. 7. Reinstall the CPCI-6020 assembly in its proper card slot. Be sure the module is well seated in the backplane connectors. Do not damage or bend connector pins.

  • Page 47: Compactflash Memory Card Installation

    To prevent injury, use extreme caution when handling, testing and adjusting this equipment. 3. Carefully remove the CPCI-6020 from the CompactPCI card slot and place it on a clean and adequately protected working surface with connectors J1 through J5 facing you.

  • Page 48: Before You Install Or Remove A Board

    PMC Module Installation on page 44. If not, read the next section nad then reinstall the CPCI-6020 assembly in the proper card slot. Check that the board is properly seated in the backplane connectors. Take care not to damage or bend connector pins.

  • Page 49: Watch For Bent Pins Or Other Damage

    If a module is not hot swap compliant, you should remove power to the slot or system before inserting or removing the module. CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 50: Recognize Different Injector/Ejector Lever Types

    Recognize Different Injector/Ejector Lever Types Hardware Preparation and Installation The CPCI-6020 does not support a hot swap LED. You may need to manually shut down applications or operating systems running on the board prior to board removal. Data Loss Powering down or removing a board before the operating system or other software running on the board has been properly shut down may cause corruption of data or file systems.

  • Page 51: Verify Slot Usage

    If the EMI barrier is open, devices may cause or be susceptible to excessive interference. CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 52: Installing And Removing A Module

    Set the VIO on the backplane to either +3.3 V or +5 V, depending upon your system’s signaling requirements. CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 53 This section describes a recommended procedure for removing a board module from a chassis. CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 54 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 55: Startup And Operation

    3. Once everything is verified, power up the system. When the power is turned on, the MPU, the hardware and the firmware initialization processes are performed. The firmware initializes the devices on the CPCI-6020 in preparation for booting the operating system.

  • Page 56: System Considerations

    2.15 System Considerations The CPCI-6020 is designed to operate as a CompactPCI system slot board. As a system slot board, the CPCI-6020 provides system clocks and arbitration for other peripheral slots in the subrack. Consequently, the CPCI-6020 must be installed in a subrack system slot marked with a triangle symbol.
  • Page 57 Hardware Preparation and Installation System Considerations A default baud rate of 9600 is used for serial ports on CPCI-6020 boards. After power-up, the baud rate can be changed using the PPCBug PF (Port Format) command via the command line interface. Whatever the baud rate, some type of hardware handshaking; either XON/OFF or via the RTS/CTS line is desirable if the system supports it.

  • Page 58: Controls, Leds, And Connectors

    Controls, LEDs, and Connectors Overview This chapter summarizes the controls, LEDs, and pin assignments for the CPCI-6020 baseboard. Controls, LEDs, and pin assignments for the CPCI-6020-MCPTM-01 transition module and RAM500 memory modules can be found in Chapter 7, Transition Module...

  • Page 59: Front Panel Connectors And Leds

    Front Panel Connectors and LEDs Front Panel Connectors and LEDs The CPCI-6020 front panel provides access to recessed Abort and Reset push-button switches, Board Fail, and CPU Bus Activity LEDs, an RJ-45 Ethernet connector, an RJ-45 serial port connector, two USB connectors and the PMC front panel.

  • Page 60: Front Panel Asynchronous Serial Port

    3.3.2 Front Panel Asynchronous Serial Port An RJ-45 receptacle is located on the front panel of the CPCI-6020 to provide the interface to the COM1 serial port. This port is configured as DCE. The pin assignments for this connector is as follows:...

  • Page 61: Abort# Switch

    Out, which is ORed with the board reset logic. This signal is debounced in the Harrier ASIC. 3.3.6 Front Panel LEDs The CPCI-6020 provides these LEDs on the front panel. Refer to the Harrier Application Specific Integrated Circuit (ASIC) Programmer’s Reference guide for details of the BDFL bit. Table 3-5 Front Panel LEDs...

  • Page 62: Table 3-6 J1 Compactpci Connector

    Pin D15 of J1 is used in peripheral slots for the BD_SEL# signal supporting hot swap. In the system slot, this pin is defined as GND. The CPCI-6020 interprets this pin as BD_SEL_L. In a non-High Availablility (HA) chassis, this signal is GND (always asserted) and hence this usage is backwardly compatible.
  • Page 63 No Connect (CLK2) (CLK3) (SYSEN_L) (GNT2_L) (REQ3_L) No Connect No Connect No Connect No Connect (CLK1) (REQ1_L) (GNT1_L) REQ2_L CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 64: Compactpci User I/O Connector

    Synchronous channel transmit clock MXCLK Clock for multiplexed data containing synchronization port control signals. MXDI Multiplexed data input CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 65: Compactpci User I/O Connector

    RESERVED AD23 AD22 AD28 AD27 AD26 AD25 AD24 GNT# REQ# AD31 AD30 AD29 INTA# INTB# INTC# INTD# RST# CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 66: Compactpci User I/O Connector

    Chip-select drive 0 or command register block select. CS3FX_L Chip select drive 1 or command register block select. CTSn Clear to send CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 67 Serial receive data Serial COM Ports (a & b), RS-232 levels: SPKROC_L PC/AT Speaker output, open collector STEP_L Step head CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 68: Memory Mezzanine Connectors

    GND * DQ22 DQ23 +3.3 V +3.3 V DQ24 DQ25 DQ26 DQ27 DQ28 DQ29 +3.3 V +3.3 V CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 69: Pci Mezzanine Card (Pmc) Connectors

    3.4.6 PCI Mezzanine Card (PMC) Connectors There are four 64-pin EIA E700 AAAB SMT connectors on the CPCI-6020 to provide the 64-bit (2x32) PCI interface and optional I/O interface to the PMC, J11 through J14. The following table shows the J11 pin assignments:...

  • Page 70: Table 3-15 J12 Pmc Connector J12 Pin Assignments

    Signal +12 V TRST# PCI_RSVD PCI_RSVD PCI_RSVD MOT_RSVD +3.3 V RST# MOT_RSVD +3.3 V MOT_RSVD PCI_RSVD AD30 AD29 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 71: Table 3-16 Pmc Connector J13 Pin Assignments

    Table 3-16 PMC Connector J13 Pin Assignments Signal Signal PCI_RSVD C/BE7# C/BE6# C/BE5# C/BE4# PAR64 AD63 AD62 AD61 AD60 AD59 AD58 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 72: Table 3-17 Pmc Connector J14 Pin Assignments

    Signal Signal PMCIO1 PMCIO2 PMCIO3 PMCIO4 PMCIO5 PMCIO6 PMCIO7 PMCIO8 PMCIO9 PMCIO10 PMCIO11 PMCIO12 PMCIO13 PMCIO14 PMCIO15 PMCIO16 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 73: Lock Down Flash Enable Jumper

    Lock Down Flash Enable Jumper A 0.1 inch, 2-pin header (J17) located on the CPCI-6020 enables lock down of one or more bank A flash. When a jumper is installed between pins 1 and 2, the lock down is enabled.

  • Page 74: Pmc 66 Mhz Disable Jumper

    3.4.9 Remote Switch Connector A 0.1 inch, 3-pin header (J19) located on the CPCI-6020 can be used to extend the front panel's Reset and Abort switches functions through the cables to a remote location. Table 3-20 J19 Remote Switch Connector...

  • Page 75: Harrier Power Up Configuration

    3.4.12 Xport Flash Bank Select Header A 0.1 inch, 3-pin header located on the CPCI-6020 controls the state of the Harrier RVEN0 bit during power up and selects which Flash bank functions as the source for the reset vector. Placing the jumper between pins 1 and 2 of J24 selects Xport 0 (Flash Bank A). Placing the jumper between pins 2 and 3 selects Xport 1 (Flash Bank B).

  • Page 76: Mictor Debug Connector

    PA20 PA21 PA22 PA23 PA24 PA25 PA26 PA27 PA28 PA29 PA30 PA31 PAPAR0 PAPAR1 PAPAR2 PAPAR3 APE_L RSRV_L CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 77 PA20 PD21 PD22 PD23 PD24 PD25 PD26 PD27 PD28 PD29 PD30 PD31 PD32 PD33 PD34 PD35 PD36 PD37 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 78 PD58 PD59 PD60 PD61 PD62 PD63 PDPAR0 PDPAR1 PDPAR2 PDPAR3 PDPAR4 PDPAR5 PDPAR6 PDPAR7 Reserved Reserved DPE_L DBDIS_L CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 79 ARTY_L XATS_L DRTY_L TBST_L TA_L Reserved TEA_L Reserved Reserved DBG_L Reserved DBB_L Reserved ABB_L TCLK_OUT CPUGNT0_L Reserved CPUREQ0_L CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 80 Reserved SRESET_L Reserved HRESET_L NAPRUN SRST1_L QREQ_L SRESET0_D_L QACK_L HRESET_L CPUTDO CPUTDI CPUCLK CPUTCK CPUCLK CPUTMS CPUCLK CPUTRST# CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 81 Controls, LEDs, and Connectors Mictor Debug Connector CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 82: Functional Description

    PCI resources and runs at a fixed speed of 33 MHz. The CPCI-6020 board has a 190-pin Mictor connector attached to the processor bus to support board debug. There is also access provided to the MPC7410 processor JTAG port via a standard 16 pin header.

  • Page 83: Block Diagram

    Functional Description Block Diagram Block Diagram The following figure is a block diagram of the CPCI-6020 architecture. Figure 4-1 Block Diagram CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 84: Local Pci Bus Resources

    Remote (Expansion) CompactPCI Bus PCI Bus A is also routed to the J4 connector. In a Motorola HA chassis this is routed across the backplane to a bridge card. On the bridge card this bus interfaces to the remote CompactPCI Bus through a transparent PCI-to-PCI bridge.

  • Page 85: Isa Bridge, Including Eide Function

    EIDE interface is routed to the J5 User I/O connector for interfacing to external EIDE devices. Some Motorola HA chassis route the EIDE Bus across the backplane to the peripheral bay. The secondary EIDE interface is implemented in such a way to support these chassis. This includes short traces matched in length, targeted impedance of 80 ohms and onboard termination.

  • Page 86: Usb Controller

    J14 provides a user I/O path from the PMC slot to the CompactPCI backplane. PMC user I/O signals are routed from the PMC J14 connector to the CompactPCI J3 connector following the PIM differential signalling recommendations. A cutout in the CPCI-6020 allows for front I/O through the PMC face plate.

  • Page 87: Secondary Ethernet Channel

    +5 V then 66 MHz PCI operation is prohibited and disabled by means of a build option. The following special function processor PMC pins, as defined by the Processor PMC Standard VITA 32-2003, are implemented on the CPCI-6020 as described in the following table: Table 4-1 Special Function Processor PMC Pins...

  • Page 88: Processor Bus Resources

    Refer to the processor data sheet for additional information. The L2 cache data SRAM for the CPCI-6020 is implemented using two 128 KB x 36-bit or 256 KB x 36-bit synchronous pipelined burst SRAMs providing a total 2 MB of L2 cache. Either memory size is able to support a minimum L2 bus speed of 200 MHz.

  • Page 89: Dual Harrier Assignments

    4.6.1 Dual Harrier Assignments The CPCI-6020 employs dual Harrier ASICs identified as Harrier A and Harrier B. Harrier A is used for access to part of system memory, access to all of flash memory, NVRAM, RTC, external registers, UARTs, onboard I C, bridging to PCI Bus A and for top level control of all interrupts.
  • Page 90 XCSR.XPAT2.DW Xport Channel 3 Data Width [2:1] Unused. XAD[0] Fixed XCSR.XPAT3.RVEN Disable Xport channel 3 as Reset Vector CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 91: Debug Connector

    Reference Guide. ECC Memory Bus Resources The CPCI-6020 supports 2 GB of memory via four RAM500 mezzanine modules populated in the two memory connectors J7 and J28. There is no onboard memory. The ECC protected memory mezzanines are distributed as separate sets, one attached to each Harrier. The CPCI- 6020 supports a total of 1 GB using currently available 256 MB SDRAMs, (evenly divided between the two Harriers) and supports 2 GB when 512 MB SDRAMs become available.

  • Page 92: Harrier B Memory Bus

    The Xport is a bridge that interfaces the 60x bus to an expansion bus named Xport Bus. Each of the two Harriers on CPCI-6020 has a separate Xport Bus. The Xport Bus is the set of signals Harrier uses to control devices that have a simple, static RAM style interface. Such devices include flash, NVRAM, RTC and external registers.

  • Page 93: Harrier A, Channel 0 - Onboard Bank A Flash

    4.8.1 Harrier A, Channel 0 - Onboard Bank A Flash The CPCI-6020 contains one bank of flash memory soldered onboard. Bank A consists of a single Intel Strata Flash P30 16-bit flash, providing 32 MB of memory. The following table defines the flash type and size.

  • Page 94: Other Harrier Resources

    4.9.1 C Bus Resources - Serial EEPROM The CPCI-6020 contains two 8 KB Serial EEPROM devices onboard and provisions for four 256-byte Serial EEPROM devices on memory mezzanines. One 8 KB Serial EEPROM provides for Vital Product Data (VPD) storage of the module hardware configuration One 8 KB device for storage of user configuration data.

  • Page 95: Other Board Resources

    Harrier A Watchdog Timer 2 may be optionally routed by means of a build option to a Harrier A MPIC interrupt or to provide a board hard reset. The standard CPCI-6020 product will be built to provide hard reset.

  • Page 96: Onboard Power Supplies

    +3.3 V. 4.10.4 Board Reset Logic A block diagram of the CPCI-6020 board reset logic is shown below. The board reset logic is implemented in a programmable logic device (PLD) in order to provide maximum flexibility of the circuit design.

  • Page 97: Table 4-6 Reset Sources And Devices Affected

    (Harrier RSTOUT, PBC Port 92) Software Hard Reset ¸ ¸ ¸ ¸ ¸ (Harrier RSTOUT, PBC Port 92) CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 98: Soft Reset

    4.10.6 Front Panel Resources The CPCI-6020 front panel provides access to recessed Abort and Reset push-button switches, Board Fail, CPU Bus Activity and Hot Swap Status LEDs, an RJ-45 Ethernet connector, an RJ-45 serial port connector, two USB connectors and the PMC front panel.

  • Page 99: On-Board Leds

    On-Board LEDs 4.10.8 On-Board LEDs The CPCI-6020 provides two LEDs visible on the front panel for status of CPU and Board Fail (BDFL). The green CPU LED is lit when the DBB# signal of processor bus is active (hardware controlled).

  • Page 100: Local Compactpci Bus Interface

    To overcome this there is a device on the CPCI-6020 which can use the JTAG interface on the 21154 to put it into a high impedance mode. That device is controlled by the remote bridge card.

  • Page 101: Eide Interface

    E700 AAAB connectors to interface to a 32/64-bit IEEE P1386.1 PMC. One of the two connectors is dedicated to user I/O. The CPCI-6020 maps the PMC user I/O pins onto the CompactPCI J3 and J5 connectors. The CPCI-6020-MCPTM-01 reverses the mapping and brings the signals to a 64-pin EIA-E700 AAAB connector to interface with its PIM site.

  • Page 102: Asynchronous Serial Ports

    The two synchronous ports, C0M3 and COM4, are implemented with the Z85230 ESCC on CPCI-6020. Since the Z85230 does not have all modem control lines, a Z8536 CIO is used to provide the missing modem lines. All modem control lines from the ESCC are multiplexed/de- multiplexed through J3 by the P2MX function due to I/O pin limitations.

  • Page 103: Table 4-7 Multiplexing Sequence Of The Iomx Function

    I/O Signal Multiplexing (IOMUX) 6020. MXSYNC# is used by the CPCI-6020-MCPTM-01 to synchronize with the CPCI-6020 module. MXDO is the time-multiplexed output line from the CPCI-6020 and MXDI is the time- multiplexed line from the CPCI-6020-MCPTM-01. A 16-to-1 multiplexing scheme is used with 10 MHz bit rate.

  • Page 104: Serial Interface Modules (Sim)

    MXSYNC# is clocked out using the falling edge of MXCLK and MDXO is clocked out with the rising edge of the MXCLK. MXDI is sampled at the rising edge of MXCLK (the CPCI-6020 MTB synchronizes MXDI with MXCLK’s rising edge). The timing relationships among MXCLK,...

  • Page 105: Pmc Interface Module Form Factor

    Functional Description PMC Interface Module Form Factor depends entirely upon which, if any, PMC is installed in the CPCI-6020 PMC site. To accommodate the pluggable nature of a PMC, a custom form factor pluggable I/O module is presented here. A physical representation of the CPCI-6020-MCPTM-01 and a I/O module sample is shown below.

  • Page 106: Pmc Interface Connector

    I/O module. This functionality is special to the host (in this case the CPCI-6020) and so the host I/O module is not a universal module. However, if the host I/O connector pinout is reused on future modular transition boards, the host I/O module may be reused.
  • Page 107 Functional Description Mouse and Keyboard Port CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 108: Firmware

    The PPCBug firmware is the layer of software just above the hardware. The firmware provides the proper initialization for the devices on the CPCI-6020 baseboard upon power-up or reset. The examples in this chapter show PPCBug as the prompt; for the CPCI-6020 baseboard the actual debugger prompt will be displayed as MCP820Bug>.

  • Page 109: Memory Requirements

    MPU, Hardware and Firmware Initialization The debugger performs the MPU, hardware and firmware initialization process. This process occurs each time the CPCI-6020 is reset or powered up. The steps below are a high-level outline (not all of the detailed steps are listed): 1.
  • Page 110 31. Executes Self-Test, if so configured. (Default is no Self-Test.) 32. Extinguishes the board fail LED, if there are no self-test failures or initialization/configuration errors. CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 111: Using Ppcbug

    Remember that help is now available on both the BUG and DIAG side. In addition, issuing help on a DIAG test category gives more information about the tests in that category. CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 112: Table 5-1 Debugger Commands

    Global Environment Variable Area Initialize (NVRAM Header) GEVSHOW Global Environment Variable Show Go to Next Instruction Go Execute User Program Go to Temporary Breakpoint CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 113 NOBR Breakpoint Delete NOCM No Concurrent Mode NOMA Macro Delete NOMAL Disable Macro Expansion Listing NOPA Printer Detach CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 114 Display Time and Date Transparent Mode Trace to Temporary Breakpoint UPDATE Update SROMs Verify S-Records Against Memory Revision/Version Display CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 115: Diagnostic Tests

    If you are in the diagnostic directory, the diagnostic prompt PPC-Diag> displays, and all of the debugger and diagnostic commands are available. Note that not all tests are valid for the CPCI-6020. Using the HE command, you can list the diagnostic routines available in each test group. Refer to the PPCBug Diagnostics Manual for complete descriptions of the diagnostic routines and instructions on how to invoke them.

  • Page 116: Table 5-2 Diagnostic Test Groups

    Diagnostic Tests Firmware Test sets marked with an asterisk (*) are not available on the CPCI-6020, unless SCSI or video PMCs are installed. Table 5-2 Diagnostic Test Groups Test Set Description CL1283 Parallel Interface (CL1283) DECchip 21x4x EIDE Tests ISABRDGE...
  • Page 117 Firmware Diagnostic Tests CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 118: Ram500 Memory Expansion Module

    Currently, you can use two expansion modules in tandem to produce an additional expanded memory capability of 1 GB per memory module site. (In the case of the CPCI-6020, two memory module sites exist for a potential of 2 GB of memory.

  • Page 119: Ram500 Module Installation

    RAM500 Module Installation Procedure One or more RAM500 memory expansion modules must be mounted on top of the CPCI-6020 for on-board memory capability. To upgrade or install a RAM500 module, follow these steps. 1. Attach an ESD strap to your wrist. Attach the other end of the ESD strap to the chassis as a ground.

  • Page 120: Features

    8. Turn the entire assembly over, and fasten the three nuts provided to the standoff posts on the bottom of the CPCI-6020 host board. 9. Reinstall the CPCI-6020 assembly in its proper card slot. Be sure the host board is well seated in the backplane connectors. Do not damage or bend connector pins.

  • Page 121: Host Clock Logic

    RAM500 module, the “bottom” module will have two connectors: one to mate with the CPCI-6020 host board (P1), and one to mate with the top RAM500 module (J1). The top RAM500 module has only one connector, since it needs to mate only with the RAM500 module directly underneath it and because an added connector on a tandem RAM500 configuration would exceed the height limitations in some backplanes.
  • Page 122 DQ52 DQ53 +3.3 V +3.3 V DQ54 DQ55 DQ56 DQ57 DQ58 DQ59 DQ60 DQ61 GND* GND* DQ62 DQ63 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 123 9 or 10 signal circuits. These ground contacts mate with grounding plates on both sides of the plug assemblies. CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 124: Top Side Memory Expansion Connector (J1)

    DQ32 DQ33 DQ34 DQ35 DQ36 DQ37 DQ38 DQ39 +3.3 V +3.3 V DQ40 DQ41 DQ42 DQ43 DQ44 DQ45 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 125 +3.3 V +3.3 V CS_E0_L GND* CS_E1_L WE_L RAS_L GND* GND* CAS_L +3.3 V +3.3 V DQMB1 A1_SPD MEZZ2_L CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 126: Ram500 Programming Issues

    RAM500 Programming Issues The RAM500 contains no user programmable registers other than the Serial Presence Detect (SPD) Data. CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 127 RAM500 Memory Expansion Module RAM500 Programming Issues CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 128: Transition Module Preparation And Installation

    The CPCI-6020-MCPTM-01 provides additional I/O capabilities to the CPCI-6020 board. The CPCI-6020-MCPTM-01 is installed directly in the CompactPCI backplane in the rear transition board bay of the chassis and interfaces with the CPCI-6020 board through the J3 and J5 connectors.

  • Page 129: Figure 7-1 Block Diagram

    CPCI-6020-MCPTM-01 supports one single-wide (74 mm wide by 69 mm long) PMC Interface Module (PIM). PMC I/O pins 1 through 64 of the PMC interface are routed from the CPCI-6020 J3 and J5 connectors. For a detailed description of the PMC Interface Module see Interface Module (PIM) on page 100.

  • Page 130: Component Layout

    The next figure shows the layout of the CPC-6020-MCPTM-01 major components. Figure 7-2 Component Layout J11 J18 J19 J16 J17 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 131: Rear Panel Connectors

    Transition Module Preparation and Installation Rear Panel Connectors 7.2.2 Rear Panel Connectors The next figure shows the location of all connectors and the PMC cutout of the CPCI-6020- MCPTM-01. Figure 7-3 Rear Panel Connectors, Cut-outs KB/MS PMC I/O Module COM1...

  • Page 132: Unpacking And Inspecting The Rtm

    J5 instead. The COM2 port is wired to the J5 connector only. COM1 is routed to an RJ-45 connector located at the rear panel of the CPCI-6020-MCPTM-01. COM2 can be accessed by a planar 9-pin header on the transition module. The COM2 signals are also wired to the PMC I/O connector for possible access through PMC I/O module.

  • Page 133: Serial Ports 3 And 4

    The two synchronous serial ports, COM3 and COM4, are implemented with the Z85230 ESCC on the CPCI-6020. Since the Z85230 does not have all of the necessary modem lines, a Z8536 CIO is used to provide the missing modem lines. All modem control lines from the ESCC are multiplexed/demultiplexed through J3 by the P2MX function due to I/O pin limitations.

  • Page 134: Serial Interface Module Circuitry

    CPCI-6020-MCPTM-01 transition module. All TTL-level signals, with the exception of data and clocks, are active low. The pull-up resistors on the CPCI-6020-MCPTM-01 transition module drive all TTL inputs to the SIM to a known logic level. The SIMs have surge suppression circuitry for all port signals going to the external connector.
  • Page 135 CPCI-6020 module to EIA-232-D voltage levels. As line receivers, the MC145406 ICs convert the EIA-232-D input signals to TTL voltage levels which are sent to the CPCI-6020. For all port interfaces, the SIMs support the transmitter signal element timing as either input or output signals.

  • Page 136: Port Configuration

    Port Configuration Transition Module Preparation and Installation 7.4.4 Port Configuration The following interface configuration diagrams describe the interface between the CPCI-6020 and CPCI-6020-MCPTM-01. Figure 7-5 EIA-232-D DCE Ports 3 and 4 Configuration COM3 COM4 Z85230 SCC CTS# RTS# RTS# CTS#...

  • Page 137: Installing The Sims

    Prior to installing the SIMs, be sure you have set the jumper(s) on J16 (for serial port 3) and/or J17 (for serial port 4), as described in the previous section for either DCE or DTE. The SIMs plug into connectors J12 (COM3) and J13 (COM4) on the CPCI-6020-MCPTM-01. Refer to Figure 7-4 on page 133 for connector and header locations.
  • Page 138 Transition Module Preparation and Installation Procedure You must set the jumpers and install the SIMs prior to installing the CPCI-6020-MCPTM-01 transition module in the system chassis. 1. Align the SIM so that P1 on the SIM align with the appropriate SIM connector (J12 for COM3 and J13 for COM4) on the transition module.

  • Page 139: Installing The Pim

    Do not over tighten the screws. Installing the PIM If a PIM has already been installed on the CPCI-6020-MCPTM-01, or you are installing a transition module as it has been shipped from the factory, disregard this section and proceed Installing and Removing the Transition Module.
  • Page 140 PIM front bezel and rear standoffs. Tighten the screws. 8. With the CPCI-6020-MCPTM-01 in the correct vertical position that matches the pin positioning of the backplane, carefully slide the transition module into the appropriate slot and seat tightly into the backplane.

  • Page 141: Installing And Removing The Transition Module

    AC cord or DC power lines from the system. Remove the chassis or system cover(s) as necessary for access to the chassis backplane. 3. With the CPCI-6020-MCPTM-01 in the correct vertical position that matches the pin positioning of the backplane, carefully slide the transition module into the appropriate slot and seat tightly into the backplane.

  • Page 142: Connectors And Cables

    Transition Module Preparation and Installation Removal Procedure Although the CPCI-6020 Single Board Computer can be removed and inserted while power is applied, the CPCI-6020-MCPTM-01 transition module is not hot swap capable. Inserting or removing the transition module while the CPU board is active may affect the normal operation of the CPU board.

  • Page 143: Table 7-3 Rear Transition Module Cables

    Floppy Power Stand-alone 4-pin power header for floppy PLD JTAG 8-pin programming header COM1 Port 3-pin header sets serial port 1 from PIM or CPCI-6020 Speaker Header For onboard speaker access. Table 7-3 Rear Transition Module Cables Part Number Description...

  • Page 144: Connector Pin Assignments

    CompactPCI Connectors Connector J3 is a 95-pin AMP Z-pack 2 mm hard metric type B connector. The pinouts for this connector are identical to those on the corresponding J3 connector on the CPCI-6020, and are described in Chapter 3, Controls, LEDs, and Connectors.

  • Page 145: Table 7-5 Pmc I/O Module - Pmc I/O Connector Pin Assignments

    PMC IO6 PMC IO7 PMC IO8 PMC IO9 PMC IO10 PMC IO11 PMC IO12 PMC IO13 PMC IO14 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 146 PMC IO56 PMC IO57 PMC IO58 PMC IO59 PMC IO60 PMC IO61 PMC IO62 PMC IO63 PMC IO64 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 147: 10Baset/100Basetx Connectors

    MCPTM-01 to support Ethernet I/O from the CPCI-6020. One channel is always routed from the CPCI-6020, the other is a custom-build option. Enabling this option requires that the proper zero ohm resistors be installed on the CPCI-6020. The pin assignments for these connectors...

  • Page 148: Com2 Header

    7.9.5 COM2 Header One 9-pin planar header is located on the CPCI-6020-MCPTM-01 to provide the interface to the COM2 serial port. This port can be configured as either DCE or DTE. The pin assignments for this header are as follows:...

  • Page 149: Floppy Port Header

    Signal No Connect 7.9.7 Floppy Port Header The CPCI-6020-MCPTM-01 provides a 34-pin header to interface to a floppy disk drive. The pin assignments and signal mnemonics for this connector are listed below. Table 7-10 Floppy Header Pin Assignments Signal Signal...

  • Page 150: Keyboard/Mouse Connector

    The keyboard/mouse interface is provided by a 6-pin circular DIN connector. To use the keyboard function only, a keyboard may be connected directly to this connector. To use both the keyboard and the mouse functions, use the Y-adapter cable provided with the CPCI-6020- MCPTM-01. Refer to the following table for pin assignments.

  • Page 151: Speaker Output Header

    The 2-pin header provides connection to an external speaker. The pin assignments are listed in the following table. Table 7-14 Speaker Output Connector Pin Assignments Signal SPKROC_L CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 152: Cnfg And Env Commands

    Local SCSI Identifier* = “07” System Serial Number = “1234567" System Identifier = “Motorola CPCI-6020603-001a” License Identifier = “12345678 “ CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 153: Env - Set Environment

    Values that are not in quotes are considered data strings, and data strings are right- justified. The data strings are padded with zeroes if the length is not met. The CPCI-6020 has no local SCSI Bus controller, hence, the Local SCSI Identifier parameter is ignored by the PPCBug.
  • Page 154 Primary SCSI Data Bus Width [W/N] = N? Wide SCSI (16-bit bus) Narrow SCSI (8-bit bus). (Default) Secondary SCSI Identifier = "07"? CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 155 Configuring the PPCBug Parameters If the board has a secondary SCSI controller, this number is the secondary SCSI ID or address. For the CPCI-6020, all PCI add-on SCSI controllers/adapters supported by PPCBug are set to the SCSI ID value entered here.
  • Page 156 The first location tested when PPCBug searches for a ROMboot module. (Default = $FFF00000) ROM Boot Direct Ending Address = FFFFFFFC? CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 157 The time value is from 0-255 seconds. (Default = 5 seconds) Network Auto Boot Configuration Parameters Offset (NVRAM) = 00001000? CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 158 Reset Ethernet chip after file transfer [Y/N] = N? Reset Ethernet chip after transfer. Do not reset Ethernet chip after transfer. CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 159 L2 Cache parity is enabled upon detection. (Default) L2 Cache parity is always enabled. L2 Cache parity is never enabled. CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 160 The default value of this parameter causes a startup delay of 5 seconds. Firmware Command Buffer [’NULL’ terminates entry]? CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 161 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 162: Related Documentation

    Related Documentation Embedded Communications Computing Documents The Motorola publications listed below are referenced in this manual, or apply to systems that use this product. You can obtain electronic copies of Embedded Communications Computing publications by: Contacting your local Motorola sales office, or Visiting Motorola Embedded Communications Computing Groups’s World Wide Web...

  • Page 163: Related Specifications

    IEEE Institute of Electrical and Electronics Engineers, Inc. http://standards.ieee.org IEEE - Common Mezzanine Card Specification (CMC) P1386 Draft 2.0 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 164 Rev. 1.02 PCI-to-PCI Bridge Specification Rev. 2.0 PCI-ISA Specification PICMG 2.1 DO.91 CompactPCI Hot Swap Specification (Draft) Dated 2/5/98 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 165 Related Documentation Related Specifications CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 166 ROM Boot Direct Starting Address EIDE header (CPCI-6020-MCPTM-01) ROM Boot Enable EIDE routing SCSI Bus Reset EMC requirements CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 167 PPCBug PPCBug initialization process memory, size from PPCBug PPCBug, affects of checksum product, how to order processor bus CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 168 RAM500 as memory module serial ports Winbond (PBC) interface to ISA and EIDE devices COM1/COM2 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 169 CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 170 Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...

Table of Contents