ABB 2600T Series Operating Instructions Manual
  1. Manuals
  2. Brands
  3. ABB Manuals
  4. Transmitter
  5. 2600T Series
  6. Operating instructions manual

ABB 2600T Series Operating Instructions Manual

266 with profibus pa communication pressure transmitters
Hide thumbs Also See for 2600T Series:
Table of Contents

Quick Links

See also: Operating Instructions
—
A B B M E A S U R E M E N T & A N A LY T I C S | O P E R AT I N G I N S T R U C T I O N
266 with PROFIBUS PA Communication
Pressure transmitters
—
Introduction
266 models
The 2600T family provides comprehensive range of
top quality pressure measurement products,
specifically designed to meet the widest range of
applications ranging from arduous conditions in
offshore oil and gas to the laboratory environment
of the pharmaceutical industry.
Engineered solutions for all
applications
Measurement made easy
For more information
Further publications for 2600T series pressure
products are available for free download from
www.abb.com/pressure
Table of Contents
loading

Related Manuals for ABB 2600T Series

Summary of Contents for ABB 2600T Series

  • Page 1 Introduction For more information 266 models The 2600T family provides comprehensive range of Further publications for 2600T series pressure top quality pressure measurement products, products are available for free download from specifically designed to meet the widest range of www.abb.com/pressure...
  • Page 2 We are an established world force in the design and manufacture of measurement products for industrial process control, flow measurement, gas and liquid analysis and environmental applications. As a part of ABB, a world leader in process automation technology, we offer customers application expertise, service and support worldwide.

  • Page 3: Table Of Contents

    7.2.1 Cable connection ........30 7.2.2 PROFIBUS wiring procedure ...... 30 7.2.3 PROFIBUS wiring procedure ...... 31 7.2.4 Grounding ..........31 7.2.5 Protective grounding ......... 31 7.2.6 Integrated lightning protection (optional) ..31 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 3...
  • Page 4 12.6 Reset ..............45 Diagnostics ..............84 Device info ..............86 Communication ............... 87 Appendix D – Troubleshooting ........88 Trouble Sheet ..............91 Return Report ..............92 EC Declaration of Conformity ........93 4 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 5: Introduction

    Model 266 can be configured to provide specific industrial output signals according to 4...20mA with HART digital communication. 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 5...

  • Page 6: Safety

    This makes the manufacturer’s warranty null and void. systems. For safety reasons, ABB draws your attention to the fact that only sufficiently insulated tools conforming to DIN EN 60900 may be used.

  • Page 7: Use Of Instruction

    The owner must observe the proper regulations for shipping purposes. All devices sent back to ABB must be free from any hazardous materials (acids, alkalis, solvents, etc.). 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 7...

  • Page 8: Transport And Storage

    — Within the scope of operator responsibility, check the following as part of a regular inspection: Pressure-bearing walls/lining of the pressure device Measurement-related function Leak-tightness Wear (corrosion) 8 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 9: Transmitter Overview

    Figure 2: Gauge / absolute pressure transmitter components Important. These two pictures show only two different kinds of transmitters equipped with Barrel type housing. Please consider that DIN housings are available. 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 9...

  • Page 10: Range & Span Consideration

    The transmitter can be calibrated with any range between the LRL and the URL with the following limitations: LRL ≤ LRV ≤ (URL - CAL SPAN) CAL SPAN ≥ MIN SPAN URV ≤ URL 10 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 11: Opening The Box

    In this case, near the CE mark, you will find the number of the notified body (0474) that have verified the compliance. 266 pressure transmitters are in compliance with EMC 2004/108/CE*. The certification plate (ref.A) shown here is issued by ABB S.p.A, 22016 Tremezzina, Italy, with the numbers: —...

  • Page 12: Optional Wired-On Sst Plate (I1)

    There is no limit to the storage period, although the terms of guarantee remain as agreed with the Company and as given in the order acknowledgement. 12 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 13: Mounting

    “7” means that the housing is protected against water; specifically, against the effects of temporary immersion in GOST (Russia), GOST (Kazakistan), Inmetro (Brazil) water under standardized water pressure and temporal — based on ATEX. conditions. 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 13...

  • Page 14: Pressure Equipment Directive (Ped) (2014/68/Ue)

    High Static pressure can damage the sensor causing a zero shift and a serious decrease of the total performance in terms of accuracy. In this case, please perform a full sensor trim. 14 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 15: Bracket Mounting (Optional)

    66 (2.60) with plug 78 (3.07) with d/v valve 54 (2.13) 96.8 (3.81) 29 (1.12) 102 (4.02) 100 (3.94) for NACE bolting Figure 8: Differential Pressure Style transmitter (High Static option) 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 15...
  • Page 16 87 (3.42) 116 (4.57) 183 (7.19) 55 (2.17) 136 (5.35) Figure 10: Differential Pressure Style transmitter with DIN housing installed on a Vertical pipe with optional bracket (B2) installation for AIR/GAS measurements 16 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...
  • Page 17 91 (3.58) 72 (2.83) 54 (2.13) 113 (4.45) 116 (4.57) Figure 12: Differential Pressure Style transmitter with barrel housing and Kynar inserts installed on a vertical pipe with optional bracket (B2) 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 17...

  • Page 18: B2 Pipe And Wall Mounting Bracket Details

    The bolts for panel mounting are not within the scope of supply. 1 – U-bolt 2 – U-bolt fixing bolt and washer 3 – Transmitter fixing bolts 4 – B2 bracket Figure 14: Pipe and wall mounting bracket kit (B2) 18 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 19: B5 Flat Type Bracket Details

    5.5.3 B5 Flat type bracket details 1 – U-bolt 2 – U-bolt fixing bolt and washer 3 – Transmitter fixing bolts 4 – B5 bracket Figure 16: Flat type mounting bracket kit (B5) 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 19...

  • Page 20: Mounting A P Style Pressure Transmitter

    CH 22 70 (2.75) 140 (5.54) Figure 18: Model 266G or 266A P-Style transmitter with barrel housing installed on a 2”pipe with optional bracket (B1 carbon steel or B2 Stainless Steel 316L) 20 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 21: B1 And B2 Barrel Housing Bracket Details

    flats of exagon 49 (1.93) 105 (4.13) Figure 20: Model 266H or 266N Hi overload resistant P-Style transmitter with DIN housing installed on a 2”pipe with optional bracket (B2 Stainless Steel 316L) 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 21...

  • Page 22: B2 Din Housing Bracket Details

    2 – U-bolt fixing bolt and washer 3 – Transmitter fixing bolts 4 – B2 bracket Figure 22: Pipe and wall mounting bracket kit (B2) for P style transmitter with DIN housing 22 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 23: Transmitter Housing Rotation

    If a separating liquid is being used, both measuring pipes must be filled to the same level (266Dx and 266Mx). 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 23...

  • Page 24: Process Connections Considerations

    Pretightening to 10 Nm (working crosswise) and then tightening by a tightening angle of 180°, working in two stages of 90° for each screw, and working crosswise. Figure 25: Kynar insert 24 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 25: Installation Recommendations

    6. Open the (B) valve and close the equalizing valve. Figure 27: Gas or liquid flow measurement (transmitter and manifold) Figure 26: Steam or clean liquid flow measurement (transmitter and manifold) 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 25...

  • Page 26: Level Measurements (Dry Leg)

    — Fill the vertical section of the connecting line to the upper part of the tank with a compatible liquid through the dedicated filling tee. Figure 30: Level measurement on open tank with P style transmitter 26 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 27: Pressure Measurement Of A Tank

    — Connect the + (H) side of the transmitter to the pipe. Figure 31: Gauge or absolute pressure measurement on a tank Figure 32: Gauge or absolute pressure measurement of a liquid in a pipe 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 27...

  • Page 28: Pressure Of A Condensable Vapor In A Pipe

    Figure 34: Gauge or absolute pressure measurement of gas in a pipe Figure 33: Gauge or absolute pressure measurement of condensable vapor 28 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 29: Profibus Pa Communication Protocoll

    Important. Further information on PROFIBUS PA can be found in the PNO Guideline and standards IEC 61158, IEC 61784, EN 50170/DIN 19245 and EN 50020 (FISCO model) see in the Profibus PNO website www.profibus.com and/or from the ABB website www.abb.com 6.2 System architecture –...

  • Page 30: Device Introduction

    Failure to comply with this warning can result in fire or 5. Connect the two bus wires to the + terminal, and the – explosion. terminal without take care of their polarity. 30 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 31: Profibus Wiring Procedure

    Important. Test voltage withstand capability can no longer be ensured when this protective circuit is used. Internal ground termination point Bus lines (polarity independent) External ground termination point Figure 36: PROFIBUS terminal block scheme 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 31...

  • Page 32: Profibus Electronics

    (1) it enables the push buttons for the ranging operation. In OFF position (0) it enables the push buttons for the PV bias Set/Reset operations. Figure 37: PROFIBUS communication board 32 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 33: Local Push Buttons

    PTRB_SECONDARY_VALUE_1 that, after this operation, returns to produce again the same value of the PTRB_TRIMMED_VALUE. — PTRB_BIAS_VALUE = 0.0 — PTRB_SECONDARY_VALUE_1 = PTRB_TRIMMED_VALUE Figure 39: Pushbutton functionalities 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 33...

  • Page 34: Hmi Local Indicator

    The Mode selection can be done through the remote setting of the HMI_MODE parameter or locally from the HMI menu “Display/Settings/Mode”. 34 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 35: Hmi As Diagnostic Indicator

    F = Failure message is formed by the NAMUR NE107 icon and the string of the component where the problem occurred. M = Maintenance O = Out of Specification C = Function Check 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 35...
  • Page 36 Button (4) functionalities Meaning been set in place and properly tightened. Select Select submenu/parameter Edit Edit parameter Save selected parameter and display stored parameter value 36 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 37: Commissioning

    During installation of the transmitter, zero shifts caused by the GSD file. mounting (e.g., a slightly oblique mounting position due to a remote seal, etc.) may occur; these must be corrected. 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 37...

  • Page 38: Network Configuration

    GSD filename of the 2600T-266 PdP transmitter is AB013450. 0101 01xx 84-87 UNCERTAIN engineering unit range violation GSD The GSD file can be downloaded from the ABB website 0110 00xx 96-99 UNCERTAIN simulated value www.abb.com. When the GSD file has been imported in the...

  • Page 39: Device Configuration

    0.5% of the SPAN parameters are addressed via SLOT/INDEX mapping. Refer to AI1_ALARM_HYS the Appendix A to see the complete parameter mapping of the Fail Safe Type 266 PdP-PA. Last Usable Out Value AI1_FSAFE_TYPE 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 39...

  • Page 40: User Setting

    All the configurable parameters listed above can be afterward PRTB_SCALE_OUT 100% modified either via the optional LCD HMI, or via software AI1_OUT_SCALE Unit Code application tools using the ABB DTM 266 PdP PA or the EDD Output Scale Unit drivers. PRTB_PRIMARY_VALUE_UNIT Data regarding flange type and material, O-ring materials, and type of filling liquid is stored in the device.
  • Page 41 (URV and LRV) to provide the best performances in the real operating range. In case the calibrated range has to be changed, please refer to the section 12 in this manual 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 41...

  • Page 42: Operations

    This operation can be executed also with the optional keypad that produces the new correction coefficients. from the menu “Calibration/P-dP Sensor/Low Trimming”. Read again the PRTB_STATIC_P_TRIM_VALUE and check if its value matches the real Static Pressure value. 42 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 43: Sensor Temperature Trimming

    — Write protection on the transmitter must not be LCD Integral Display,or PC based software as Asset Vision activated. Basic). The transfer function can be applied to the Process Variable only or also to the indication (in engineering units). 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 43...

  • Page 44: Transfer Functions Description

    Spherical tank This function is used to measure the volumetric level into a spherical tank. The transmitter calculates the volume from the measured filling level. 44 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 45: Savings

    Save as The Static P Sensor calibration/trimming is saved as User User Static Calibration P Sensor Trimming Save as User The Sensor Temp. calibration/trimming is saved as User Sensor Temp Calibration Trimming 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 45...

  • Page 46: Pild Algorithm

    ADTB_PILD_TRAINING_OUTPUT the possible cause like: — Process Instable during training — Process not available during training — Not good process condition for training — Training not done 46 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 47: Device Block Diagram

    14 Device Block Diagram 14 Device Block Diagram 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 47...
  • Page 48 14 Device Block Diagram 48 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 49: Maintenance

    In case you want deposits are expected to accumulate, the measuring ABB to perform the repair, please send back the transmitter to equipment should be cleaned on a regular basis, in accordance your local ABB office complete with the return form that you with the operating conditions.

  • Page 50: Pressure Transducer Replacement

    14. A PV zero bias operation is recommended to align the zero to the installation. This operation should be accomplished after the transmitter has been installed back to its bracket and connected to the manifold. See “Correcting the lower range value / zero shift”. 50 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 51: Hazardous Area Considerations

    Notified Body which has responsibility for (Protection by intrinsic safety”iD”) the pressure transmitters of the surveillance of the production. the 2600T SERIES have been certified for the following group, categories, media of dangerous atmosphere, temperature The other marking refers to the protection type used according classes, types of protection.
  • Page 52 Note: the protection is mainly assured by the “IP” degree supply (associated apparatus)certified [Ex ia] associated to the low power from supply. This can either be [ia] or [ib] Note for “Primary transducer”: see the certification for exceptions 52 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...
  • Page 53 IP code About the degree of protection provided by the enclosure of the pressure transmitter, the 2600T SERIES has been certified IP67 according to EN 60529 standard. The first characteristic numeral indicates the protection of the inside electronics against ingress of solid foreign objects including dusts.
  • Page 54 FM11ATEX0048X (Shanghai products) — T5: Temperature class of the transmitter (corresponding to 100°C max) with a Ta from -50°C to +40°C Important. It is the technical support for the ABB Declaration of Conformity — T6: Temperature class of the transmitter (corresponding to 85°C max) with a Ta from -50°C to +40°C...

  • Page 55: Entities For "L5" Option

    — Type 4X applications Indoors/Outdoors. Apparatus for Use in Class I, II, III, Division 1, and Class I, Zone 0 & 1 Hazardous (Classified) For a correct installation in field of 2600T Series pressure Locations. transmitters please see the related control drawing.

  • Page 56: Appendix A - Device Mapping

    Unsigned8: value range = 0...255 Unsigned16: value range = 0...65535 Unsigned32: value range = 0...4294967295 Storage Class — Cst: constant parameter — D: dynamic parameter — N: non-volatile parameter — S: static parameter 56 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 57: Device Management

    Appendix A – Device mapping 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 57...

  • Page 58: Physical Block (Pb)

    Appendix A – Device mapping 58 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...
  • Page 59 Appendix A – Device mapping 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 59...
  • Page 60 Appendix A – Device mapping 60 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 61: Analog Input (Ai)

    Appendix A – Device mapping 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 61...

  • Page 62: Pressure Transducer Block (Prtb)

    Appendix A – Device mapping 62 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...
  • Page 63 Appendix A – Device mapping 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 63...
  • Page 64 Appendix A – Device mapping 64 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...
  • Page 65 Appendix A – Device mapping 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 65...
  • Page 66 Appendix A – Device mapping 66 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...
  • Page 67 Appendix A – Device mapping 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 67...

  • Page 68: Advanced Diagnostic Transducer Block (Adtb) . 66 Hmi Transducer Block (Hmitb)

    Appendix A – Device mapping 68 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...
  • Page 69 Appendix A – Device mapping 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 69...

  • Page 70: Appendix B - Device Diagnostic Table

    Appendix B – Device diagnostic table Appendix B – Device diagnostic table 70 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...
  • Page 71 Appendix B – Device diagnostic table 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 71...

  • Page 72: Appendix C - Hmi Structure

    The last section of this structured and driven menu gives you the possibility of changing the Tag, the Address and the Ident Number of the device. 72 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 73: Easy Set-Up

    Appendix C – HMI structure Easy Set-up 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 73...
  • Page 74 Appendix C – HMI structure 74 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 75: Device Set-Up

    Appendix C – HMI structure Device Set-up 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 75...
  • Page 76 Appendix C – HMI structure 76 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...
  • Page 77 Appendix C – HMI structure 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 77...
  • Page 78 Appendix C – HMI structure 78 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 79: Display

    Appendix C – HMI structure Display 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 79...
  • Page 80 Appendix C – HMI structure 80 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...
  • Page 81 Appendix C – HMI structure 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 81...
  • Page 82 Appendix C – HMI structure 82 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 83: Calibrate

    Appendix C – HMI structure Calibrate 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 83...

  • Page 84: Diagnostics

    Appendix C – HMI structure Diagnostics 84 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...
  • Page 85 Appendix C – HMI structure 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 85...

  • Page 86: Device Info

    Appendix C – HMI structure Device info 86 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...

  • Page 87: Communication

    Appendix C – HMI structure Communication 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 87...

  • Page 88: Appendix D - Troubleshooting

    Appendix D – Troubleshooting Appendix D – Troubleshooting 88 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...
  • Page 89 Appendix D – Troubleshooting 2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 89...

  • Page 91: Trouble Sheet

    Shipping information for the return of the equipment Material returned for factory repair should be sent to the nearest ABB Service Center; transportation charges prepaid by the Purchaser Please enclose this sheet duty completed to cover letter and packing list...

  • Page 92: Return Report

    Signed Name Position Date ABB S.p.A Process Automation Division Uffici Commerciali / Sales Office: Via Statale, 113 - 22016 Lenno (CO) Italy Tel. +39 0344 58 111 Fax +39 0344 56 278...
  • Page 94 Note 94 OI/266/PB-EN Rev. E | 2600T Series Pressure transmitters...
  • Page 95 Fax: +1 215 6747183 − IEC 61508 SIL2/3 certified temperature sensors and transmitters ABB Inc. 3450 Harvester Road ABB’s portfolio of recorders and controllers: Burlington, Ontario L7N 3W5 – Canada − Process controllers and indicators Tel: +1 905 6810565 − Videographic recorders Fax: +1 905 6812810 −...
  • Page 96 We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document.

This manual is also suitable for:

2600t-2662600t-2642600t-265

Table of Contents