Emerson Liebert IntelliSlot Quick Start Manual

Web/485 card with adapter

Quick Links

Liebert
I
NSTALL
• Locate the adapter mounting location within your Liebert
equipment.
• Secure the card with the supplied screws.
• Connect the equipment's communication cable to the TB1 terminal
block or P1 on the card (See equipment user manual for details).
• Connect an Ethernet cable to RJ45.
• Connect a Modbus (RS-485) cable to the TB2 terminal block.
• Connect an input power supply cable to Pins 1 & 2 on the TB3 terminal
block; Pin 1 is at the far left, and Pin 2 is the middle pin.
TB3
(P1: +)
(P2: -)
(P3: NC)
P1 is on the
left end of
terminal
block.
TB2
(P1: +)
(P2: -);
P1 is at
the right side
of terminal block.
DHCP: The card ships with DHCP service enabled. The MAC address is
printed on a sticker affixed to the top of the card.
OR
Static IP: To assign a static IP address, use the Service Terminal to con-
figure the card. Proceed to Steps 2 & 3.
C
ONNECT THE
• Connect a configuration cable (null modem) to the DB-9 port
on the card and to a COM port on your PC. The configuration
cable is available separately from Emerson (P/N LIEBNULL).
C
ONFIGURE THE
• Use terminal emulation software,
such as HyperTerminal
direct connection to the card.
• Press Enter for the Main Menu.
• Select option 2 and follow the instructions to
enter an IP ADDRESS, NETMASK and
GATEWAY.
• Press Esc to return to the Main Menu.
• Enter X to save your changes and reboot the card.
IntelliSlot
®
With Adapter

Quick Start Guide

TB1 (P1: +; P2: -); P1 is at
the right side of terminal block.
Web/485 Card
®
C
ABLE
C
ARD
, to open a
P1
Network Port
for NMS and
Web Access
DB-9
Port
MAC Address
Terminal Emulation
Software Configuration
Baud Rate:
Data Bits:
Parity:
Stop Bits:
Flow Control:
9600
8
None
1
None
loading

Summary of Contents for Emerson Liebert IntelliSlot

  • Page 1: Quick Start Guide

    ABLE • Connect a configuration cable (null modem) to the DB-9 port on the card and to a COM port on your PC. The configuration cable is available separately from Emerson (P/N LIEBNULL). ONFIGURE THE • Use terminal emulation software,...
  • Page 2 User Manual This guide is designed to give you the information you need to install and configure the Liebert IntelliSlot Web/485 card with adapter. A full user manual, SL-52615, is available online at www.liebert.com. Emerson Network Power highly recommends that new users consult the user manual.