Table of Contents
Quick Links
Table of Contents
Related Manuals for DeWalt D25980-XE
Summary of Contents for DeWalt D25980-XE
- Page 1 INSTRUCTION MANUAL D25980-XE HEAVY-DUTY PAVEMENT BREAKER...
-
Page 2: Definitions: Safety Guidelines
c. Keep children and bystanders away while operating a power tool. Definitions: Safety Guidelines Distractions can cause you to lose control. 2. ELECTRICAL SAFETY The definitions below describe the level of severity for each a. Power tool plugs must match the outlet. Never modify the plug in any signal word. -
Page 3: Extension Cords
c. Avoid accidental starting. Ensure the switch is in the off position performed. Use of the power tool for operations different from those intended could result in a hazardous situation. before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. - Page 4 Keep a firm grip on the tool at all times. Do not attempt to operate this tool • crystalline silica from bricks and cement and other masonry products, and without holding it with both hands. Operating this tool with one hand will •...
-
Page 5: Components (Fig. 1)
FEATURES (FIG. 1) FIG. 1 The D25980 Pavement Breaker has been designed for professional heavy-duty demolition, applications in concrete, brick, stone and other masonry materials. ON/OFF Switch The weight of the hand will active/deactivate the ON/OFF switch. Firmly grasp pavement breaker while applying pressure with the right hand to turn the pavement breaker on. -
Page 6: Maintenance
To Operate WARNING: To reduce the risk of injury, only D WALT recommended accessories should be used with this product. A variety of bits are available from NOTE: Use sharp drill bits only. your local retailer. 1. Insert bit as described in Bits. NOTE: Insert bits with the front of tool (G) facing up. -
Page 7: Three Year Limited Warranty
Recommended accessories for use with your tool are available at extra cost from FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or your local service center. If you need any assistance in locating any accessory, are missing, call (AUS) 1800 654 155 or (NZ) 02 259 1111 for a free replacement. please contact D WALT Industrial Tool Co., 20 Fletcher Road, Mooroolbark, VIC 3138 Australia or call 1800 654 155 or (NZ) 02 259 1111. - Page 8 20 Fletcher Road, Mooroolbark, VIC 3138 Australia (03 8720 5100) • 5 Te Apunga Place, Mt Wellington, New Zealand (09 259 1111) (APR07) Form No. 496158-00 D25980-XE Copyright © 2007 D WALT The following are trademarks for one or more D WALT power tools: the yellow and black color scheme;...