Related Manuals for Samsung DRGW
Summary of Contents for Samsung DRGW
- Page 1 DRGW User’s Manual...
-
Page 2: Main Features
1. Main Features The DR Gateway enables you to monitor and control power consumption of installed appliances through WiFi and ZigBee Modem. The DR Gateway enables you to detect the maximum power consumption of home and control power consumption. The DR Gateway collects and saves real-time electricity rates and electricity ... - Page 3 Humidity : 10% ~ 90% Size (L x W x H) 230 x 120 x 45 mm Indicates ON and OFF state of the DR Gateway Indicates the Internet connection and Communication state Indicates LAN connection and ZigBee Modem B communication state communication state ZigBee Modem A communication state ...
- Page 4 None Initial power on state of ZigBee Modem A BLINK Blue Data transmission of ZigBee Modem B None Initial power on state of ZigBee Modem B Jack for connecting the power source cable RJ-45 jack for connecting UTP cable for WAN connectivity RJ-45 jacks for connecting For Service Use Only UTP cables for LAN connectivity...
- Page 5 Please make sure that you read and follow all safety instructions described in this manual. Instructions for connecting the power source Only use the AC adapter provided with the product. Do not touch the power source plug with wet hands. When using multi-outlet extension cord, do not exceed the rating specifications (voltage/current) of the extension cord.
- Page 6 The system power cord must be plugged into a properly grounded outlet to prevent electric shock. Ensure that it is plugged into a grounded outlet. Do not install the product in locations with high humidity. It may result in a risk of electric shock.
-
Page 7: Other Instructions
If you want to connect any other peripheral device to the product other than those recommended by Samsung Electronics, contact your dealer first. If you connect peripheral devices other than those recommended by Samsung, the product itself or the peripheral devices might get damaged. Other instructions Do not lift or move the product with the handle on the power supply. - Page 8 Before removing power from the product, unplug power from each of the devices connected to the product. Note that electric current flowing from the power source, telephone and communication cable is dangerous. Do not connect, release or install cable to the product during a fire, flood or thunderstorm.
- Page 9 1. Connecting Cable 1) Connecting Internet Line Connect Internet Line to the WAN port on the right of the DR Gateway back side. 2) Connecting PC or Notebook Connect your PC network line to the LAN port on the DR Gateway back side ...
- Page 10 2. Configuring your PC Network 1) Open Local Network Connection Status window of the PC connected to DR Gateway. 2) Open TCP/IPv4 Property window of Local Network Connection. 3) Set TCP/IP Property to ‘Get IP address automatically’. 4) Close Network Connection Status window.
- Page 11 Please Note below configuration changes. Wrong configuration value disables you to connect to DR Gateway Change only when using static IP address of Internet connection. Normally do not need to change configurations. 3. Network Configuring through Web browser 1) Open your web browser and navigate to http://192.168.1.1.
- Page 12 4. Configuring Wireless Network Connection Open Network Configuration Web page with above 3rd instruction. 1) Click ‘Network’ and ‘Wireless’ tab and move to Wireless configuration page.
- Page 13 2) Configure SSID Input your Wireless SSID in ‘SSID’ box. Click ‘Save Changes’ button on the right bottom. 3) Configure Authentication Input your Authentication way and password for Wireless connection in the box of ‘Network Authentication’, ‘Data Encryption Technique’, ‘Password(PSK)’ Click ‘Save Changes’...
- Page 14 Change this configuration when using static IP address of Internet connection. Please Note below configuration changes. Wrong configuration value disables you to connect to Internet 5. Configuring Internet Static IP Open Network Configuration Web page with above 3rd instruction. 1) Click ‘Network’...
- Page 15 2) Change WAN Configuration section’s ‘Connection Type’ as Static IP. 3) Input IP Address / Mask / Default Gateway. 4) Click ‘Save Changes’ button on the right bottom.
-
Page 16: Certification And Safety Approvals
The device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by Samsung will void the user's authority to operate the equipment. - Page 17 Part 15.105 (B) Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation.