Quick Links
Related Manuals for Honeywell 2104B0715
Summary of Contents for Honeywell 2104B0715
- Page 1 Installation Guide Reflector Panel Heater...
- Page 2 Reflector Heater Panel replaces the standard double glazed retro-reflector in applications where there is risk of condensation occurring on the retro-reflector. The Reflector Heater Panel is available in two sizes: short range (part number 2104B0715) and long range (part number 2104B0716).
- Page 3 REFLECTOR PANEL HEATER INSTALLATION GUIDE Issue 5 May 2007 2104M0728 3 Certification The certification details and special conditions for use are shown below. The Special Conditions for Safe Use are as follows:- 1. The integral supply cables must be mechanically protected and terminated in a suitable terminal or junction facility.
-
Page 4: Mechanical Assembly
REFLECTOR PANEL HEATER INSTALLATION GUIDE Issue 5 May 2007 2104M0728 4 Mechanical Assembly This section details the basic mechanical assembly information and important dimensions necessary for installation. 4.1 Short Range Reflector Panel Heater The short range Reflector Panel Heater is suitable for use from 0.5m to 2.5m. All Dimensions in millimetres 4.2 Long Range Reflector Panel Heater The Long Range Reflector Panel Heater is suitable for use from 2.5m to 5m. -
Page 5: Mechanical Installation
REFLECTOR PANEL HEATER INSTALLATION GUIDE Issue 5 May 2007 2104M0728 5 Installation The Reflector Panel Heaters are designed to allow installation to be performed by a single operator. The installation procedure is split into mechanical installation and electrical installation. 5.1 Mechanical Installation Follow these instructions carefully. -
Page 6: Electrical Installation
REFLECTOR PANEL HEATER INSTALLATION GUIDE Issue 5 May 2007 2104M0728 5.2 Electrical Installation 1. Isolate all associated power supplies and ensure that they remain OFF during this proce dure. 2. Fit an approved cable gland to the junction box cable entry to be used for the power connections to the Reflector H eater Panel, using sealing washers where necessary to maintain ingress protection rating. - Page 7 REFLECTOR PANEL HEATER INSTALLATION GUIDE Issue 5 May 2007 2104M0728 5.2.2 Terminal Connection Diagram- Long Range Reflector Panel Heater The long range Reflector Panel He ater is a resistive heater requiring an 18-28Vdc (nominal 4Vdc) supply. All connections are made inside the junction box supplied as part of the flector Panel Heater Assembly.
- Page 8 Thank you for reading this data sheet. Please contact us for a quotation: Head Office (UK) Switzerland Office P.O. Box 2124 Zugerstrasse 46 Chelmsford 6314 Unterägeri Essex CM1 3UP England Switzerland Tel: +44 (0)1245 600 560 Tel: +41 41 541 5877 Fax: +44 (0)1245 600 030 Fax: +41 41 541 5878 Email:...