Quick Links
SIMATIC Ident
RFID systems
SIMATIC RF645T
Compact Operating Instructions
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The
notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage
have no safety alert symbol. These notices shown below are graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of
injury to persons with a safety alert symbol may also include a warning relating to property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific task in accordance with
the relevant documentation, in particular its warning notices and safety instructions. Qualified personnel are those who, based on their
training and experience, are capable of identifying risks and avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products
and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage,
installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any
problems. The permissible ambient conditions must be complied with. The information in the relevant documentation must be observed.
© Siemens AG 2017. All rights reserved
C79000-G8976-C477-01, 12/2017
Siemens Distributor
1
Related Manuals for Siemens SIMATIC RF645T
Summary of Contents for Siemens SIMATIC RF645T
-
Page 1: Legal Information
WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems. -
Page 2: Ordering Data
Characteristics SIMATIC RF645T is a passive and maintenance-free on-metal data storage medium. It is specially designed for mounting directly on metal surfaces. It operates based on UHF Class 1 Gen 2 technology and is used to save the "Electronic Product Code"... - Page 3 UV light and weathering ￮ Explanation of the rating Resistant ￮ Conditionally resistant Not resistant Read/write ranges Table 4-1 Read range between RF600 antennas and SIMATIC RF645T Antenna type Read ranges RF620A 1.5 m RF640A 5.0 m RF642A 6.0 m RF650A 4.0 m...
-
Page 4: Technical Specifications
Technical specifications Table 5-1 Technical specifications of SIMATIC RF645T 6GT2810-2HC05 Product designation SIMATIC RF645T Radio frequency Operating frequency (broadband) ETSI 865 MHz to 868 MHz • • FCC, CMIIT and others 902 MHz to 928 MHz • • Memory Chip (manufacturer/type) -
Page 5: Certificates And Approvals
Table 6-1 Certificates and approvals Labeling Description Conformity with the RED directive 2014/53/EU Conformity with the RoHS directive 2011/65/EU Passive labels and transponders comply with the valid regulations; certification is not required. Federal Communications Commission SIMATIC RF645T C79000-G8976-C477-01, 12/2017 Siemens Distributor... -
Page 6: Dimension Drawing
Dimension drawing All dimensions in mm SIMATIC RF645T Figure 7-1 Dimension drawing of SIMATIC RF645T Retaining bracket for SIMATIC RF645T Figure 7-2 Dimension drawing mounting cover (6GT2898-5AA00) for SIMATIC RF645T SIMATIC RF645T C79000-G8976-C477-01, 12/2017... - Page 7 Dimension drawing (6GT2898-5AB00) for SIMATIC RF645T Trademarks All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.