Makita 3706 Instruction Manual
Cutout tool
Hide thumbs
Also See for 3706:
- Instruction manual (49 pages) ,
- Parts manual (2 pages) ,
- Instruction manual (29 pages)
Related Manuals for Makita 3706
Summary of Contents for Makita 3706
- Page 1 INSTRUCTION MANUAL Cutout Tool 3706 004550 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
EC Declaration of Conformity sockets without earth wire. Makita Corporation responsible ENG905-1 Noise manufacturer declare that the following Makita The typical A-weighted noise level determined according machine(s): to EN60745: Designation of Machine: Cutout Tool Sound pressure level (L ) : 82 dB(A) Model No./ Type: 3706... - Page 3 Do not abuse the cord. Never use the cord for representative in Europe who is: carrying, pulling or unplugging the power tool. Makita International Europe Ltd. Keep cord away from heat, oil, sharp edges or Michigan Drive, Tongwell, moving parts. Damaged or entangled cords Milton Keynes, Bucks MK15 8JD, England increase the risk of electric shock.
- Page 4 Power tool use and care platform.Holding the work by your hand or against 18. Do not force the power tool. Use the correct the body leaves it unstable and may lead to loss of power tool for your application. The correct control.
-
Page 5: Functional Description
failure to follow the safety rules stated in this ASSEMBLY instruction manual may cause serious personal injury. CAUTION: FUNCTIONAL DESCRIPTION Always be sure that the tool is switched off and • unplugged before carrying out any work on the tool. CAUTION: Installing or removing bit Always be sure that the tool is switched off and... -
Page 6: Operation
OPERATION 001630 When the cut is complete, turn the tool off and wait for the bit to stop rotating and then carefully remove it from the 001627 material. CAUTION: Avoid forcing the bit to bend or twist. It may snap. •... - Page 7 001638 Vacuum cover Connecting to Makita vacuum cleaner or dust Cleaner operations can be performed by connecting the collector cutout tool to Makita vacuum cleaner or dust collector. 1. Vacuum cover 2. Hose 28 3. Hose for vacuum cleaner 001639...
-
Page 8: Maintenance
Connect the hose of a vacuum cleaner/dust collector to the dust nozzle. When connecting to Makita vacuum cleaner, an optional hose 28 mm in inner diameter is necessary. When connecting to Makita dust collector, connect the hose for the dust collector directly to the dust nozzle. - Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 884373D223...