Quick Links
Check wheel bearing.
Fit rubber silencer.
Read and follow the instruction manual before assembling, installing, operating, or servicing the equipment.
OCL8850 Quick Reference Guide
Note: Rotor must remain in
place on hub at all times.
Remove wheel.
Fit adapter; bolts M10 or larger
[50 Nm (37 ft-lb)].
Fix all bolts/nuts and drive
adapter 50 Nm (37 ft-lb).
Fit lathe [50 Nm (37 ft-lb)],
place drive unit, and machine rotor.
OCL 8850
Remove caliper and clean
mounting surfaces.
577365 REV A
Related Manuals for Bosch OCL8850
Summary of Contents for Bosch OCL8850
- Page 1 OCL 8850 OCL8850 Quick Reference Guide Note: Rotor must remain in Fix all bolts/nuts and drive Remove caliper and clean place on hub at all times. adapter 50 Nm (37 ft-lb). mounting surfaces. Remove wheel. Check wheel bearing. Fit adapter; bolts M10 or larger Fit lathe [50 Nm (37 ft-lb)], Fit rubber silencer.
- Page 2 Aligned Lathe 36 VDC inlet switch panel insert direction indicator cutting depth adjuster arrow 1 click is 0.002 inch (0.05 mm) Left Switch Panel Drive Unit (right panel is mirrored) switch panel to direction operate slides indicator arrow power indicator light flashes red flashes red when active...