D-Link DWL-G710 Troubleshooting

Troubleshooting - Can not access DWL-G710 on 192.168.0.30

Please note that when accessing the device's Web interface via http://192.168.0.30 you are not

accessing some web site on the Internet. The device's configuration pages are built into the

device. You do not have to be online to get to those pages, you just need to be connected to the

DWL-G710. Please also make sure all the Anti-virus/firewall software on your computer,

especially Norton, is disabled before you access http://192.168.0.30

Step 1.

Connect your computer's network

using a network cable.

Verify physical connectivity by checking for solid link lights on the LAN ports of the device. If

you do not get a solid link light, try using a different cable or connect to a different port on the

device if possible. If the computer is

Step 2. Under

Control Panel

is enabled and not bridged with any other connection. If you see any icon there

Connection

which is called "Bridge" - delete it. If you see your

right-click and select "Remove from Bridge".

DWL-G710 troubleshooting Page 1 of 5

port to your repeater's LAN ports (Ethernet ports)

to your computers

turned off, the link light may not be on.

>

Network Connections

Local Area Connection

... make sure that your

marked as "Bridged" -

Local Area