Page 1
User Manual MODEL : PSH0731B Read the "Safety precaution" before using the product and use the product accurately. P/No.: MFL62860603...
Page 2
What is PLS? Plasma Lighting System PLS is a non-electrode lighting device of new concept applying the light principle of plasma by microwave. These are the benefits. It is highly efficient and has a long life span, making it very efficient. - You can save power consumption fee and maintenance cost compared to the existing lighting (based on number of installed units).
* After reading the user manual, keep it at a location Contents where any user can see. Safety precaution 4 ~ 7 Installation and power connection Use and cleaning Installation method Composition and name Installation standard 10 ~ 11 Check before requesting for service Product standard...
• Meaning of symbol described in product and this manual is as follow: • This figure symbol is symbol to alert about matters and Safety manipulations that may result in danger. For the part where precaution this symbol exists, you must carefully read the contents to avoid occurrence of danger and comply with instructions.
Page 5
Current Within Capacity ±10% WARNING For smooth cooling of the Firmly fix the product to product, ensure a minimize the product from clearance by not putting shaking considering the any object between the vibration of the installing rack inlet and the outlet. and product weight (19kg).
WARNING Safety precaution Do not disassemble or change the design of the product arbitrarily. Earth Terminal Do not use the lighting for underwater use. (Underwater scenery, investigation, fishing, event etc.) • It can cause fire and electric shock. Do not disassemble the main unit. Earth Terminal •...
Page 7
Current Capacity WARNING Current Within Make sure no alien When the lamp goes off Capacity ±10% substance (pin, coin, metal abnormally, do not wire etc.) gets in the disassemble the product. inlet/outlet and holes on Request for repair to the the internal/external case.
Installation Before installing the product…. method - This product (PSH0731B) is developed for indoor use and can only be used indoors. - To prevent the product from falling by wind or external force, use bolt and nut of M12 or higher.
Installation Installation standard standard (For fixed type on ceiling) Use the M12 bolt and nut on Anchor Bolt both sides. M12 Nut Washer (To prevent from being loosened) Washer Support Washer Washer (To prevent from being loosened) M12 Nut M12 Nut Double nut connection IN-PUT POWER CORD...
Page 11
Installation standard (When using lighting reel) Connect bolt and nut to central hole. Auto Reel Auto Reel Carabine Hooks Support “Eye” Bolt Washer (To prevent from being loosened) Flat Washer Support Washer (To prevent from being loosened) M12 Nut 2EA IN-PUT POWER CORD (220-240V/50Hz) (Single Phase / 3W / 1.5SQ )
Check Symptom Check points Solution before The cooling fan is Is the 220-240V • Plug to 220-240V. requesting not working. power outlet • Turn it off and then correctly connected? turn it on after 5 for service minutes. The product is Request for service turned off after 5 minutes.
Product Model name : PSH0731B standard Rated voltage : 220-240V / 50Hz Power consumption : 730W Electricity frequency : 2450 ± 50MHz Dimensions : L500xW500xH480mm Weight : 18.2kg Light speed : 58,500lm Color temperature : 4,500K, 6,500K, 7,500K Rendering : 80Ra Temperature range for use : –...
Page 16
* This product is not serviced generally Authorized LG Service Centers. Contact installed company for PLS or above call center number. Contents of User’s Manual are based on November, 2009 and may be changed without a prior notice.