D-Link DAP-1155 Quick Install Manual

Quick Install Guide

Wireless N 150 Bridge/Access Point

Thank you for purchasing the DAP-1155. Follow the easy steps in this guide

to properly set up your device. Please verify that all the package contents

listed below are available.

Package Contents

DAP-1155 Wireless N 150 Bridge/Access Point

Ethernet Cable

Power Adapter

If any of the above items are missing, please contact your reseller.

Device Placement

To get the best wireless coverage, place your device in an open area away

from your computer, monitor, and speakers. Try to position the device so

that the signal passes through drywall or open doorways. Materials and

objects such as glass, steel, metal, walls with insulation, water (fish tanks),

mirrors, file cabinets, brick, and concrete will degrade your wireless signal.

DAP-1155

Wireless Modes

Access Point Mode - The DAP-1155 acts as a central connection point for

any wireless client that has an 802.11n or backward-compatible 802.11g

wireless network interface and is within range of the AP. Multiple clients

can connect to the AP at the same time.

Bridge Mode - The DAP-1155 acts as a wireless network adapter for your

Ethernet enabled devices (such as a game console or a TV set-top box)

and will connect wirelessly to an existing wireless router or access point.

LEDs

Power LED - A solid light indicates a proper connection to the power

supply.

Wireless LED - A blinking green light indicates the wireless function is

working. The light will blink fast during data transmission.

WPS LED - Located on the right side, a solid light indicates a successful

WPS connection. A blinking light indicates the device is trying to establish

a connection.

WPS - Push Button Setup

Step 1 - Insert the power adapter into the power receptacle located on the

rear panel of the DAP-1155 and plug the adapter into a suitable nearby

power source. (This unit is to be used only with the power supply provided

by the manufacturer.)

Step 2 - Check the status of the DAP-1155 by checking the green LED.

Push the button on the back of the DAP-1155 to initiate a secured wireless

connection.

Step 3 -

Within 120 seconds, push the WPS button on your WPS-enabled

router or access point (if the DAP-1155 is in Bridge Mode) or your wireless

clients (AP Mode) to link them together.

Step 4 -

Once the WPS button stops blinking, you can move the DAP-1155

to the desired location.

Step 5 -

Plug the Ethernet cable between the device you wish to use and

the DAP-1155.

First Time Configuration

Step 1 - Connect the DAP-1155 to your computer using the supplied

Ethernet cable. Once you configure the device, you can place it into your

network.

Note: To login to your DAP-1155, you must statically assign an IP address

(192.168.0.x where x is between 2 and 254, and not 50) on your computer.

Step 2 - To access the configuration utility, open a web browser such

as Internet Explorer, enter http://192.168.0.50 in the address field and

press Enter.

Step 3 - Select the wireless mode from the drop-down menu and then follow

the on-screen instructions to configure your DAP-1155.

Step 4 - Once you are finished configuring your DAP-1155, you may disconnect

the Ethernet cable and place it in your network. Also, change your IP settings

on your computer back to the original settings.

Technical Support

Having trouble installing your new product? D-Link's website contains the

latest user documentation and software updates for D-Link products. U.S.

and Canadian customers can contact D-Link Technical Support through our

website or by phone.

United States

Canada

Telephone:

(877) 453-5465

Telephone:

Internet:

http://support.dlink.com

Internet:

http://support.dlink.ca

©2010 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link

Corporation or its subsidiaries in the United States and/or other countries. Other trademarks or registered trademarks are the property

of their respective owners. Actual data throughput will vary. Network conditions and environmental factors, including volume of

network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental

conditions will adversely affect wireless signal range. Product specifications, size and shape are subject to change without notice, and

actual product appearance may differ from that depicted on the package. Visit dlink.com (US) or dlink.ca (Canada) for more details.

Version 1.0 | October 5, 2010 290726001155A10

(800) 361-5265