Quick Links

FCC RF EXPOSURE INFORMATION

WARNING! Read this information before using your phone
In August 1996 the Federal Communications Commission (FCC) of the United States
with its action in Report and Order FCC 96-326 adopted an updated safety standard for
human exposure to radio frequency electromagnetic energy emitted by FCC regulated
transmitters. Those guidelines are consistent with the safety standard previously set
by both U.S. and international standards bodies. The design of this phone complies
with the FCC guidelines and these international standards.
Use only the supplied or an approved antenna. Unauthorized antennas, modifications,
or attachments could impair call quality, damage the phone, or result in violation of FCC
regulations.
Do not use the phone with a damaged antenna. If a damaged antenna comes into
contact with the skin, a minor burn may result. Please contact your local dealer for
replacement antenna.
Body-worn Operation
This device was tested for typical body-worn operations with the back of the phone kept
1.5 cm. from the body. To maintain compliance with FCC RF exposure requirements,
use only belt-clips, holsters or similar accessories that maintain a 1.5 cm. separation
distance between the user's body and the back of the phone, including the antenna,
whether extended or retracted. The use of belt-clips, holsters and similar accessories
should not contain metallic components in its assembly. The use of accessories that
do not satisfy these requirements may not comply with FCC RF exposure
requirements, and should be avoided.
For more information about RF exposure, please visit the FCC website at
www.fcc.gov
Table of Contents
loading

Summary of Contents for Sanyo A1303SA

  • Page 1: Fcc Rf Exposure Information

    FCC RF EXPOSURE INFORMATION WARNING! Read this information before using your phone In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters.
  • Page 2 Operating Instructions Name & Function of Parts 1 2 6 3 7 4 9 5 8 1 0 Antenna 1 Incoming call light 2 Blinks when the phone rings, and lights red during battery charging. Built-in camera (Lens) 3 Used to take digital images. Built-in flash 4...
  • Page 3 External connection terminal Used to hear other party's voice, 2 0 Used to connect an optional devices various messages. Display such as Sanyo DC adapter 01. 1 2 Shows various settings, phone (End) key 2 1 numbers. Used to turn on and off the power, to Flexible keys end a call, or to hold a call.
  • Page 4: Display Indications

    Display Indications Icons appear on the display to show the status of the handset. ● 1 2 3 4 5 6 7 8 9 Secret is set 1     10:10 Secret is temporarily set      10:10      10:10      10:10 Battery voltage level 2...
  • Page 5 Invalidation of side key operation is set Character entry mode display 1 0 1 7 * Task time limit display (alarm is set) 1 1 ( ) Kanji and hiragana characters Nothing will be displayed until 8 days before the set time(   ) *...
  • Page 6 ■ Power saving during standby In order to minimize the power consumption, the A1303SA display turns automatically to power saving mode when key operation is stopped for a while. The indication restores with key operation. ■ Using the flexible keys Each key is allocated to an item shown in the bottom of the display.
  • Page 7 Sub-display Indications When the handset is closed, the sub-display tells the status of the handset. (The ● screens in this manual are somewhat different in fonts and shapes from actual ones.) 1 2 3 4 5 6 10/10Fri 10:10 Battery voltage level Codes for roaming areas 1...
  • Page 8: Getting Ready To Make A Call

    1. Insert the connector of the Sanyo AC adapter 02 firmly into the desktop charging holder. 2. Connect the plug of the Sanyo AC adapter 02 into an AC wall outlet. 3. Put the telephone (A1303SA) with battery pack attached into the desktop charging holder, paying attention to the installing direction.
  • Page 9: Extending The Antenna

    Extending the antenna The radio waves cannot be transmitted or received well if the antenna is not extended. To facilitate transmission and reception of radio waves, use the phone by positioning the antenna vertically with respect to the ground. Extending the antenna Retracting the antenna ●...
  • Page 10 Checking the display screen Check the display screen and make sure it is shown in the figure below after you turn the power on. This will indicate if the phone is in good working order. The availability of power is indicated in three levels. 10:10      10:10...
  • Page 11: Switch To English

    Set up for first use 1. Just after you have bought the handset or you have initialized all func- tions and memories by performing M453 operation, press 2. Select " 今すぐ設定 " and press 3. Press 4. Select "YES" and press 選択...
  • Page 12: Making An International Call

    Calling to general, mobile and PHS phones 1. Enter the phone number you want to call. Area code - Local code - Subscriber's number. Example: 03-0001-XXXX Always include the area code, even when calling to a number in the same area you are in.
  • Page 13: Answering A Call

    Answering a call 1. The ringer tone sounds/vibrator buzzes, and the incoming call lamp flashes. 2. Press to answer the call. An incoming call can also be answered by pressing any of the ∼ , or keys when M52: AnyKey Answer is set. If you do not answer the call or the caller disconnects before the call is answered, "Missed Call X"...
  • Page 14 [Assignment of characters and key functions] Characters are assigned to each key as shown below. Press a key repeatedly to cycle through characters assigned to that key. "Kanji", "Hiragana" "Katakana" "Alphanumeric" "Number" "Phone entry mode (full size) (half size) (half size) (half size) number"...
  • Page 15: Registering In The Address Book

    Registering in the Address Book You can register frequently used phone numbers and E-mail addresses. Up to 500 addresses can be registered in the address book. ■ Registering in the address book 1. Press and hold for more than one second. The address book item list is displayed.
  • Page 16: Calling From The Address Book

    Calling from the Address Book You can make a call by using phone ■ S e a r c h i n g f o r a p h o n e numbers saved in the Address Book. number using the dial keys There are 8 ways to search numbers You can make a call from a list of the saved in the Address Book.
  • Page 17 4. Select "Reading Search" and 8. Perform Steps 3 to 5 described press in "Searching for a phone number by scrolling".(→ Page 15) 5. Enter the first several characters of desired name. ■ Searching the address book 6. Press Search by history 7.
  • Page 18: List Of Basic Setup

    List of Basic Setup ■ M0 Profile Mode No. Function Description Profile Displaying own phone number and E-mail address ■ M1 Call/Toll Mode No. Function Description M11☆ Previous Call Displaying last call's estimated talk time and charge M12☆ Accum.Display Displaying estimated total talk time and charge M13☆...
  • Page 19 ■ M3 Screen Mode No. Function Description Main Display Setting Main display  M311※ Wall Paper Setting wallpaper on standby screen  M312※ Screen-Saver Setting screen saver  M313※ Mail Connect Setting E-mail, C-mail connection screen  M314※ EZ Connect Setting EZweb connection screen  M315 Power Saving Setting Power save screen Sub Display...
  • Page 20 ■ M5 User Support Mode No. Function Description Char.Entry Setting character entry method  M511 Entry Setup Setting character entry method/forecast conversion  M512 Edit Format Editing formatted text  M513 EditFaceMark Editing face marks  M514 EditUsrDict. Registering/Editing User dictionary  M515※ D/L Dict. Registering the dictionary downloaded from EZweb  M516 Learning Clr Initializing learned information...
  • Page 21: Specifications

    ■ NetworkService(M8) Mode No. Function Description Voice Mail Answering message service  M811 Play VoMail Listening to messages  M812 VoMail1 ON Setting the answering message service 1  M813★ VoMail2 ON Setting the answering message service 2  M814 VoMail OFF Stopping the answering message service  M815★...

Table of Contents