Available languages
Available languages
Quick Links
Activ8 PIR
Activ8 PIR
Activ8 PIR
Activ8 PIR
8IR103
PIR MOTION DETECTOR
With PET IMMUNITY up to 25Kg
INSTALLATION INSTRUCTIONS
English
P/N 7101507 REV. F A.Y.
Activ8 PIR FEATURES
FEATURES
Quad Linear Imaging Technology for
•
sharp analysis of body dimensions and
differentiation from background and
animals.
New ASIC based electronics.
•
Immunity to animals up to 25kg (55 lbs).
•
18m Detection Range with Wide Angle
•
Lens.
•
Temperature compensation.
Compact Design for Residential
•
Installation.
Variable pulse width adjustment.
•
Sensitivity adjustment.
•
Environmental immunity.
•
Height installation calibration
•
free (1.8m – 2.4m).
LED Remote function.
•
REMOVAL OF FRONT COVER
Unscrew the holding
screw and open base
TERMINAL BLOCK CONNECTIONS
Terminals 1 & 6 - Marked "EOL " – End of line
option.
Terminals 2 & 3 - Marked " TAMPER "
If a Tamper function is required connect these
terminals to a 24-hour normally closed protective
zone in the control unit. If the front cover of the
detector is opened, an immediate alarm signal will
be sent to the control unit.
The Activ8 PIR detector uses a special
designed optical Lens with unique Quad
(Four element) PIR Sensor and new ASIC
based electronics optimized to eliminate false
alarms, caused by small animals and Pets.
The Activ8 PIR provides unprecedented levels
of immunity against visible light.
The Detector offers an exceptional level of
detection capability and stability for every
security installation.
The Activ8 PIR is supplied with Wide Angle
lens.
DETECTION PATTERN
1. To remove the front cover, unscrew the holding
screw and gently raise the front cover.
2. To remove the PC board, carefully unscrew the
holding screw located on the PC board.
3. Break out the desired holes for proper
installation.
4. The circular and rectangular indentations at the
bottom base are the knockout holes for wire
entry. You may also use mounting holes that are
not in use for running the wiring into the
detector.(For option with bracket - lead wire
through the bracket)
5. Mount the detector base to the wall, corner or
ceiling. (For option with bracket install bracket).
6. Reinstall the PC board by fully tightening the
holding screw. Connect wire to terminal block.
7. Replace the cover by inserting it back in the
appropriate closing pins and screw in the holding
screw.
DETECTOR INSTALLATION
Terminals 4 & 5 - Marked " RELAY "
These are the output relay contacts of the
detector. Connect to a normally closed zone in the
control panel.
Terminal 7 - Marked " + " (+12V)
Connect to a positive Voltage output of 8.2 -16Vdc
source (usually from the alarm control unit)
Terminal 8 - Marked " - " (GND)
Connect to the negative Voltage output or ground
of the control panel.
PRODUCT DESCRIPTION
3
The Activ8 PIR provides Pet immunity up
to 25Kg (55 lbs). For better immunity
avoid installation in areas where pets can
reach upwards.
TYPICAL INSTALLATION
SELECT MOUNTING LOCATION
Choose a location most likely to intercept an
intruder. See detection pattern. The Quad high
quality sensor detects motion crossing the beam;
it is less sensitive detecting motion towards the
detector.
The Activ8 PIR performs best when provided with
a constant and stable environment.
AVOID THE FOLLOWING LOCATIONS
∗ Facing direct sunlight.
∗ Facing areas subject to rapid
temperature changes.
∗ Areas with air ducts or substantial air
flows.
MOUNTING THE DETECTOR
KNOCKOUT HOLES
A
D
A
C
B
C
B
PCB LAYOUT
A.
Wire access
holes
A
B.
Use for flat
wall
mounting
C.
Corner
C
B
mounting -
use all 4
holes.
Sharp left or
C
right angle
mounting -
use 2 holes
B
(top and
bottom)
D.
For bracket
mounting
Related Manuals for Honeywell Activ8 PIR
Summary of Contents for Honeywell Activ8 PIR
- Page 1 INSTALLATION INSTRUCTIONS security installation. The Activ8 PIR provides Pet immunity up to 25Kg (55 lbs). For better immunity The Activ8 PIR is supplied with Wide Angle avoid installation in areas where pets can English lens. reach upwards.
- Page 2 Detection Method Quad (Four element) PIR Power Input 9.6 to 16 VDC Current Draw Standby: 8mA (± 5%) Active: 10mA (± 5%) Temperature Honeywell Security & Communications Compensation (UK64)Newhouse Industrial Estate Pulse Width Adjustable Motherwell Alarm Period 2 sec (± 0.5sec)
-
Page 3: Instrucciones De Instalacion
El detector ofrece un óptimo nivel de detección y CON INMUNIDAD A MASCOTAS estabilidad para cada instalación de seguridad. El detector Activ8 PIR se suministra con óptica El detector Activ8 AM incluye inmunidad contra mascotas de hasta 25Kg. Para INSTRUCCIONES DE INSTALACION de gran angular. - Page 4 3. Reemplazar la lente. 4. Inserte la lente en su lugar presionando hasta oír un “click”. 5. Reemplace la cubierta. ESPECIFICACIONES TECNICAS MODELO Activ8 PIR Honeywell Security & Método de detección Cuádruple elemento PIR Rango de Alimentación 9.6 a 16 Vdc Communications Consumo Reposo:8mA (±5%)
- Page 5 Activ8 PIR Activ8 PIR Activ8 PIR Activ8 PIR Infrarossi ad alta definizione. Activ8 PIR è un rilevatore IR per la protezione 8IR103 antintrusione tramite un sensore Piroelettrico a quadruplo elemento (Quad), che utilizza una IR PASSIVO QUAD lente speciale ad ampio angolo.
- Page 6 Uscite allarme 2 x N.C 28Vdc 0.1A con protezione resistiva da 10 Ohm Fax : +39 0 248 880 55 33 NB. Tamper aperta con copertura aperta www.honeywell.com/security/it Tempo di riscaldamento 1 min LED Indicatore LED Rosso acceso in allarme Temperatura di lavoro da -20°...