Related Manuals for LG L330-DN
Summary of Contents for LG L330-DN
- Page 1 OWNER'S MANUAL Color Video Camera Please read this manual carefully before operating your set and retain it for future reference. MODEL L330-DN L330-DP L330 Series P/NO : MFL67260109...
- Page 2 FCC WARNING: This equipment may generate or use radio CAUTION frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction RISK OF ELECTRIC SHOCK manual. The user could lose the authority to operate this DO NOT OPEN equipment if an unauthorized change or modification is made.
- Page 3 Caution: This installation should be made by a qualified • Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent service person and should conform to all local codes. type recommended by the manufacturer. Dispose Caution: To avoid electrical shock, do not open the of used batteries according to the manufacturer’s cabinet.
- Page 4 LG Electronics hereby declares Disposal of your old appliance that this/these product(s) is/are in compliance with the essential This crossed-out wheeled bin symbol requirements and other relevant indicates that waste electrical and provisions of Directive 2004/108/EC electronic products (WEEE) should and 2011/65/EU.
- Page 5 Important Safety Instructions Read these instructions. and the point where they exit from the apparatus. Keep these instructions. 11. Only use attachments/accessories specified by the manufacturer. Heed all warnings. 12. Use only with the cart, stand, tripod, bracket, or table Follow all instructions.
- Page 6 Cautions for Safe Operation Power Supply Operating and storage location This camera must always be operated a DC 12 V Avoid viewing a very bright object (such as light fittings) Certified/Listed, class 2 power supply only. during an extended period. Avoid operating or storing the unit in the following locations.
-
Page 7: Table Of Contents
Contents Features ..............8 OSD Menu Overview ...........17 Specification ............33 Part Names and Functions ........9 Connections ............10 Precautions ..............10 Connection Overview ..........10 Connecting Display device........11 Connecting Power Source .........11 Mounting the Lens ............12 Flange-back Adjustment .........14 Mounting the camera ..........15 Menu Operation.......... -
Page 8: Features
Features This Camera is designed for installation in an video surveillance system. This manual contains instructions on how to install and manage the Color Video Camera in your video surveillance system. Should you require any technical assistance, please contact authorized service center. •... -
Page 9: Part Names And Functions
Part Names and Functions b Flange-back adjustment ring b c d e c Camera installation bracket The bracket can be fixed at the top or bottom of the camera. d Lens iris output connector (LENS) This 4- pin connector is used to send the Iris control signal and power supply to an auto-iris type lens. -
Page 10: Connections
Connections Precautions • Be sure to switch off the unit before installation and connection. • A qualified service person, complying with all applicable codes, should perform all required hardware installation. • Do not expose the power and connection cable to moisture, which may cause damage to the unit. Connection Overview... -
Page 11: Connecting Display Device
Connections Connecting Display device Connecting Power Source The video signal connection between the camera and the Connect power, using the method listed below: monitor. Remove the insulation on the power cable as illustrated. (a) Attach the terminal tips. (b) Connect to the DC 12 V UL Listed, Class 2 Power Supply only on the unit. -
Page 12: Mounting The Lens
Connections Mounting the Lens era opening and turn the lens slowly to install it. Remove the lens mount cap from the camera. Install the auto-iris lens. 2-1. CS mount type lens Connect the lens plug to the lens iris output Carefully align the lens mount with the camera connector (LENS) on the side of the camera. - Page 13 Connections lens iris output connector Rewire the lens iris plug Pin layout for the lens iris output connector. Cut off the plug of the lens cable, cut off approximately 8 mm of the insulation, and then strip approximately 2 mm of the ends of the cable sheaths.
-
Page 14: Flange-Back Adjustment
Connections Flange-back Adjustment The adjustment is required only when a lens without focus-adjusting mechanism is mounted, or when a lens with adjusting mechanism is mounted and focus that is more accurate is needed. Loosen the flange-back fixing screws. Tighten the flange-back fixing screws. Note: The object may be out of focus when using a source of near-infrared light than using the visible light. -
Page 15: Mounting The Camera
Connections Mounting the camera The mounting bracket can be secured on either the top or bottom of the camera. Use the same set of screws to attach the mounting bracket on the camera. Note: If using a camera mounting bracket, select a location that is strong enough to bear the full weight of the camera and the mounting bracket for long periods, and install the camera and mounting bracket securely. -
Page 16: Menu Operation
Menu Operation OSD Menu control buttons BUTTON Description This camera utilizes an on-screen user MENU. To set items Used to move upper direction on the on the menu, use the following buttons. menu screen. Use this button to select an item or adjust the parameters. UP button Used to move lower direction on the menu screen. -
Page 17: Osd Menu Overview
Menu Operation OSD Menu Overview The following table shows the list of menu items and options. You can adapt the camera to your requirements by setting up the respective items in these menus. MAIN MENU SUB MENU CONTENTS TYPE AUTO MODE AUTO/OPEN/CLOSE LENS... - Page 18 Menu Operation SPEED 0 to 255 DELAY CNT 0 to 255 ATW FRAME x0.5,x1.0,x1.5,x2.0 ENVIRONMENT INDOOR,OUTDOOR PUSH B-GAIN 0 to 255 WHITE BAL USER1 R-GAIN 0 to 255 B-GAIN 0 to 255 USER2 R-GAIN 0 to 255 ANTI CR MANUAL LEVEL 29 to 79 PUSH LOCK BACKLIGHT...
- Page 19 Menu Operation BURST ON/OFF DELAY CNT 0 to 255 AUTO DAY/NIGHT 0 to 255 DAY/NIGHT NIGHT/DAY 0 to 255 COLOR BURST ON/OFF LUMINANCE LOW/MIDDLE/HIGH CONTRAST LOW/MIDDLELOW/MIDDLE/MIDDLEHIGH/HIGH NR MODE Y/C,OFF,Y,C Y LEVEL 0 to 15 C LEVEL 0 to 15...
- Page 20 Menu Operation DETECT SENSE 0 to 127 BLOCK DISP OFF/ON/ENABLE MONITOR AREA ON/OFF MOTION DETECTION 0 to 244(NTSC), 0 to 288(PAL) BOTTOM 0 to 244(NTSC), 0 to 288(PAL) AREA SEL (1 to 4) LEFT 0 to 474(NTSC), 0 to 468(PAL) RIGHT 0 to 474(NTSC), 0 to 468(PAL) 0 to 244(NTSC), 0 to 288(PAL)
- Page 21 Menu Operation MIRROR OFF/ON BRIGHTNESS 0 to 255 CONTRAST 0 to 255 PICT ADJUST SHARPNESS 0 to 255 0 to 255 GAIN 0 to 255 CAMERA ID SYNC LANGUAGE English (The option depends on the model.) CAMERA RESET SAVE ALL EXIT...
- Page 22 Menu Operation General Operation LENS Setting Press [SET] button. The setup menu screen appears. Select the desired lens iris value for camera exposure. Select AUTO or MANUAL mode from [LENS] menu, and select a value. Use [UP] or [DOWN] button to select an option then press [SET] button.
- Page 23 Menu Operation SHUTTER/AGC Setting High Luminance Low Luminance Select the desired shutter speed for camera exposure. And > MODE: You > MODE: You can if the images are too dark, change the maximum AGC value can select the select the mode to make the images brighter.
- Page 24 Menu Operation White Balance Setting • MANUAL: You can set the Shutter and AGC options manually. Select the method by which the camera shifts its output > SHUTTER: Select the desired shutter speed colors to compensate for the color of a light source. for camera exposure.
- Page 25 Menu Operation > When the scene is dim. • USER: You can set the white balance options. > SPEED: Use [LEFT] or [RIGHT] to set the ATW > B-GAIN: Obtains the optimum amount of pull-in speed. If you select high value, ATW blue gain.
- Page 26 Menu Operation Backlight Setting Day/Night Setting Use BACKLIGHT option to view the object clearly in backlight conditions. Select [DAY/NIGHT] option. Use [LEFT] or [RIGHT] button to select mode for Day/ Night function. Select [BACKLIGHT] option. • AUTO: You will be able to change the Day/Night Use [LEFT] or [RIGHT] button to select a mode then mode automatically.
- Page 27 Menu Operation ATR (Adaptive Tone Reproduction) Setting > Day/Night: Transition point set to Day to Night. Adaptive Tone Reproduction is the mapping of scene • Color: Color mode enabled. luminance and color to print reflectance or display • B/W: Black-and-white mode enabled. luminance.
- Page 28 Menu Operation NR Setting Motion Detection Setting If you select high value, you can reduce the more noise. The motion detection detects the moving objects in the When you use this function, the afterimage may occur. scene by monitoring changes in brightness level. Select [NR] option.
- Page 29 Menu Operation Privacy Setting Use [UP] or [DOWN] to select an Area Select option from 1 to 4 then use [LEFT] or [RIGHT] button to adjust This function is aiming at the protection of personal the option. privacy, selecting a screen part black or other color not to •...
- Page 30 Menu Operation Picture Adjust Settings • RIGHT: Moves right position on the screen. Use [LEFT] or [RIGHT] button to set up 1 to 8 from COLOR option. Use [LEFT] or [RIGHT] button to set up TRANSP option. Use [LEFT] or [RIGHT] button to set up MOSAIC option. •...
- Page 31 Menu Operation • GAIN: Edit the video color gain of the camera press [SET]. from 0 to 255. • POS: Use [UP], [DOWN], [LEFT] or [RIGHT] button to move position of CAMERA ID on the screen. • A (Blank): Inserts a space at the cursor position. Camera ID Setting •...
- Page 32 Menu Operation Language Setting Camera Reset Setting Select the viewer language for the camera setup menu. • CAMERA RESET: To reset the camera setting to Select [LANGUAGE] menu. initial setup, select [CAMERA RESET] option. Press [LEFT] or [RIGHT] button to select a language.
-
Page 33: Specification
Specification ITEM L330-DP L330-DN Signal System NTSC Total Pixels No./ Effective Pixels No. 610 000 Pixels / 570 000 Pixels 520 000 Pixels / 480 000 Pixels Image Device 6 mm CCD Signal Process Sony Effio-E Lens CS Mount (C Mount using adaptor ring) - Page 34 Specification ITEM L330-DP L330-DN Minimum Illumination 0.1 lx (F1.2, 30 IRE) Video Output Signal 1 Vp-p Composite (75 Ω) Day & Night Digital (Auto / Day / Night) Backlight OFF / BLC / HLC 2D-DNR Electronic Shutter Speed 1/50 to 1/10 000...
- Page 35 Specification ITEM L330-DP L330-DN Operation Humidity 0 % RH to 80 % RH Storage Humidity 0 % RH to 85 % RH Weight 305 g Dimension (H x V x D) 61.5 mm x 67.54 mm x 134 mm...