Remote viewing setup using a dynamic or static ip connection, tzo.com dynamic dns and based on a d-link 4 port wired 804-hv router (23 pages)
Summary of Contents for Samsung SDH-C85100BF
Page 1
Quick Network Setup Guide Use Router to Connect to Network By using a router, you can connect your computer and 1-3 DVRs to the Internet through sharing by using a XDSL or cable TV modem. This guide is intended for the average users other than professional network engineers. INTERNET xDSL or Cable TV xDSL or Cable TV...
Step 1. Connect the cable 1. Connect the Internet service line (XDSL/cable TV Modem) to the Internet (WAN) port on the router. 2. Connect the computer and DVR to the LAN port (1-4) on the router by using an Ethernet cable. Cable TV/ADSL/VDSL Broadband Router INTERNET...
7. Select and , and then click on . 8. Click on to finish setting. Step 2.2 Verify connection 1. Click [Start] on your computer. 2. Click on [Run]. 3. Enter "cmd" in text box found within the dialog box, and then click on [OK].
Page 4
7. If the connection fails, check all cables and return to Step 2.1, and then select . In "Local Connection Status" window, click on tab and select Default Gateway> (if it matches the gateway as found in [cmd.exe] window, and then check connection again.) Step 3.
Page 5
Step 3.2 Check DVR Connections on Computer 1. Run Internet Explorer, and enter the and of DVR into the address bar, and then press [ENTER]. For example, http://192.168.1.200: 80. 2. If the connection has been set up correctly, the Web Viewer screen will be displayed.
Page 6
5. Select . Dynamic IP Address Environment 6. Select . 7. Click on [Save Settings]. Static IP Address Environment 8. Select . 9. Enter the , and allocated by your ISP. 10.
Page 7
Step 4.1-Case 2. NETGEAR WGR614SS 1. Run Internet Explorer and enter the IP address of found in Step 2 into the address bar, and then press [ENTER]. 2. When the router login window is displayed, enter your User name and Password.
Page 8
Check Connection Upon connection, the status indicator will be displayed at the top of the screen. Step 4.1-Case 3. LINKSYS WRT54G 1. Run Internet Explorer and enter the found in Step 2 into the address bar, and then press [ENTER]. 2.
Page 9
Dynamic IP Address Environment 5. Select . 6. Click on [Save Settings] at the bottom. Static IP Address Environment 7. Select . 8. Enter the , and allocated by your ISP. 9. Click on [Save Settings] at the bottom. ADSL Environment 10.
Page 10
Step 4.1-Case 4. BELKIN F5D8236-4 1. Run Internet Explorer and enter the IP address of found in Step 2 into the address bar, and then press [ENTER]. 2. Click on - . Select your Internet Service type. Dynamic IP Address Environment 3.
Page 11
ADSL Environment 9. Select as the connection type and click on [Next] button. 10. Enter your User name and Password. For your User name and Password, consult your ISP. 11. Click on [Apply Changes]. Check Connection Once connected, the status indicator will be displayed at the top of the interface.
Page 12
Dynamic IP Address Environment 5. Select . 6. Click on . If your ISP provided you with a specific DNS address, please click on - and enter the DNS address. 7. Click on [Apply] button at the bottom. Static IP Address Environment 8.
Page 13
Check Connection 16. Click on - from the menu on the left side, and check the current status of server at under LAN type. When the connection is set up successfully, the will be displayed.
Step 5. Port Forwarding Port forwarding should be configured for accessing from the outside of the router network to a computer or DVR which is connected to the router. Configure router port forwarding in accordance with the following instructions. What's port forwarding? It is a port mapping from ...
Page 15
Step 5.1-Case 2. NETGEAR 614SS 1. Click on [Port Forwarding / Port Triggering] from the menu on the left side. 2. Select . 3. Set port forwarding for . . Set port forwarding for . . In field enter a name for DVR. For example, "DVR 1"...
Page 16
3. Set port forwarding for . . In field, enter a name for DVR port. For example, "DVR 2" . In and fields, enter defined in Step 3. For example, 192.168.1.200 . Select [Both] for .
Page 17
Step 5.1-Case 5. TRENDNET TEW-652BRP 1. Click on and then from the menu on the left side. 2. Set port forwarding for . . Select [Enable] for item . . In field, enter a name for DVR port. For example, "DVR 1"...
Page 18
Step 6. Access DVR by Using DDNS Service in Dynamic IP Environment As WAN IP address of router may be different in XDSL/cable TV network connection where dynamic IP allocation is applied, DDNS (Dynamic Domain Name Service) is provided for access to DVR with fixed DDNS address in dynamic IP network environment. Step 6.1 DVR DDNS Configuration 1.