Kenwood MGR-A7 Quick Start Manual
Kenwood MGR-A7 Quick Start Manual

Kenwood MGR-A7 Quick Start Manual

Digital audio recorder
Hide thumbs Also See for MGR-A7:

Quick Links

Specifications
Built-in flash memory
Recording format
PC system configuration
: 2 GB*
1
: WAV (44.1/ 48 kHz: 16 bit: Monaural/
requirements *
4
Stereo)
OS
Headphone output
: WMA (44.1 kHz: 64/ 96/ 128 kbps:
: Microsoft® Windows® Vista/XP (Not
: 3.5 mm stereo mini jack
Stereo)
: 6.0 + 6.0 mW/ 16 Ω
supported by 64 bit version OS.)
: WMA (44.1 kHz: 32 kbps: Monaural)
USB connector
Line output
Maximum recording time (without
: Compliant to USB 1.1/2.0 standard
: 3.5 mm stereo mini jack
other types of file)
: 700 + 700 mV/ 10 kΩ
WAV
WMA
USB jack
Recording
48
44.1
128
96
64
format
: USB 2.0/ USB 1.1
kHz
kHz
kbps
kbps
kbps
Display
Internal
2h40m
2h54m
32h
42h
64h
memory
: 1.5 inch monochrome LCD
8G
10h40m 11h36m 128h 168h 256h
Main unit dimensions (W × H × D)
4G
5h20m
5h48m
64h
84h
128h
: 52.7 mm × 100.0 mm × 18.0 mm
2G
2h40m
2h54m
32h
42h
64h
• Kenwood follows a policy of
:(2-1/16 × 3-15/16 × 11/16 inch)
1G
1h20m
1h27m
16h
21h
32h
continuous advancements in
Weight (Net)
development. For this reason
(Unit: h = hour, m = minute)
: Approx. 95 g
specifications may be changed
* The figure shown are standard values
without notice. The full performance
:
(Approx. 0.21 lbs)
of stereo recording.
may not be exhibited in an extremely
Operational Temperature Range
* During continuous recording, the file is
cold location (under a water-freezing
divided every 2 hours.
: 5 °C – +35 °C (without condensation)
temperature).
Battery type
Playback format
*1 The actual available space may be
smaller than specified due to the
: Built-in Li-ion rechargeable battery
MP3
presence of the system file area.
Sampling rate: 22.05/ 24/ 32/ 44.1/
AC adaptor (AC-050150A)
*2 The continuous play time value is the
48 kHz
Power supply
standard value when the provided
Bit rate: 32 - 320 kbps
: AC 100-240 V
headphones are used, Supreme is "Off"
Variable bit rate: 32 - 320 kbps
Rated input capacity
and the sound mode is "NORMAL".
ID3 tag: ver. 2.2/ 2.3/ 2.4
Note that it is not the guaranteed
: 0.2 A 13 W
WMA (DRM compatible)
value. The actual time may be
Rated output
Sampling rate: 32/ 44.1/ 48 kHz
shortened depending on the ambient
: DC 5 V 1.5 A
Bit rate: 32 - 320 kbps
temperature and other operating
3
Max. recording tracks *
Variable bit rate: 32 - 355 kbps
conditions.
: Approx. 450 tracks
(Not supported by Professional,
The battery operation time may be
2
Lossless, or Voice.)
shortened with certain SD cards.
Battery operation time *
*3 Assuming that each tracks is in the 128
WAV (Linear PCM)
Continuous play time (Internal
kbps MP3/ WMA format with playback
Sampling rate: 22.05/ 24/ 32/ 44.1/
memory)
time of about 4 min.
48 kHz
WAV (44.1 kHz): Approx. 19 hours
*4 All of the above specified PC
Bit rate: 8 bit/ 16bit
MP3 (128 kbps): Approx. 19 hours
environment does not guarantee full
Channel: Stereo/Monaural
WMA (128 kbps): Approx. 19 hours
operation of this unit.
Recording time (Built-in
SD card *
5
Use a PC in which either OS
mentioned above is preinstalled.
microphones & internal memory)
Compatible SD card
Operation is not guaranteed on a
WAV (44.1 kHz): Approx. 12.5 hours
: SD card, SDHC card, miniSD™ card,
PC running an upgraded OS or a PC
WMA (128 kbps): Approx. 12.5 hours
miniSDHC™ card, microSD™ card
assembled by yourself.
(Data recorded in the SD audio format
*5 This unit is capable of recording/
cannot be played back.)
playback of SD/SDHC memory cards
complying with the SD or SDHC
standard.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your dealer for information or service on this product.
Model
Serial Number
Safety precautions
Notes on AC adapter
• Do not plug or unplug the power plug with a wet hand.
Otherwise, an electric shock may result.
IMPORTANT SAFETY INSTRUCTIONS
• In case a thunder begins to rumble, do not touch the AC adapter
¤ Caution:
or the power plug. Otherwise, an electric shock may result.
• In case a thunder begins to rumble when you are using this unit
Read this page carefully to ensure safe operation.
outdoors, immediately stop using it. Otherwise, an electric shock
may result.
Read Instructions – All the safety and operating instructions
• Clean the power plug and AC adapter plug periodically. If dirt
should be read before the product is operated.
is attached on these plugs, deterioration of insulation due to
Retain Instructions – The safety and operating instructions should
moisture may result in a fi re or electric shock. To clean the power
be retained for future reference.
plug, unplug it from the power outlet and wipe dirty with a dry
Heed Warnings – All warnings on the product and in the
cloth.
operating instructions should be adhered to.
• Do not damage the power cord by scratching, modifying,
Follow Instructions – All operating and use instructions should
bending forcibly, twisting, stretching, heating or fi xing it with a
be followed.
staple or nail. Also do not place a heavy object on the power cord
or lay it below this unit. If you cover the power cord with a carpet,
WARNING :
etc., you run the risk of placing a heavy object on it. Damage to
• Do not use headphones during riding/driving a vehicle or
the cord may result in a fi re or electric shock. Using the damaged
walking.
power cord may result in a fi re or electric shock.
Otherwise, a traffi c accident may result. Never use headphones
• In case of an abnormality with this unit, unplug the power plug.
when you ride a bicycle or driving an automobile or motorbike.
In case of water or a foreign object penetrates inside this unit
If this unit is used during walking, the ambient sounds will be cut
or it produces smoke, abnormal odour or noise, immediately
and you may have diffi culties in hearing various warning sounds.
switch off this unit and unplug the power cord from the power
• Do not operate this unit during riding or driving a vehicle.
outlet. Continuing the use of the equipment may result in a
Do not operate this unit when you drive or ride an automobile,
fi re or electric shock. After the smoke, abnormal odour or noise
motorbike or bicycle. Otherwise, a traffi c accident may result. Be
disappears, consult your dealer or a Kenwood service agent for
sure to stop the vehicle in a safe place before operating this unit.
servicing.
• Do not stare at the display screen during riding or driving a
• If you drop the AC adapter or this unit, unplug the power cord.
vehicle.
If equipment is dropped or the cover or case is damaged, switch
Otherwise, a traffi c accident may result.
off this unit, unplug the AC adapter from the power outlet.
• Always use the designated AC adapter.
Continuing the use of the equipment may result in a fi re or
Otherwise, a fi re or electric shock may result.
electric shock.
• Always plug the power plug of the AC adapter into an outlet
• Do not open the case of or modify the AC adapter or this unit.
supplying the specifi ed voltage.
These incorporate high voltage parts inside and opening or
Otherwise, a fi re or electric shock may result.
modifying them may result in a fi re or electric shock.
Precautions :
Notes on using through headphones:
• Do not insert or drop a metallic object or an easily fl ammable
• Do not start listening with too high a volume. Otherwise, sudden
object inside this unit through an opening. Otherwise, a fi re
output of a high-volume sound may cause hearing failure, etc.
hazard or battery leak may result.
• Do not listen to the audio with an extremely high volume for long
• When connecting ancillary equipment to this unit, read the
hours. Otherwise, your hearing ability may be damaged.
instruction for the equipment, switch this unit off and connect
• Do not use headphones if an abnormality is felt on the skin.
the equipment as instructed. Also be sure to use the specifi ed
Otherwise, skin infl ammations may result. Should any abnormality
cord for the connection. Inappropriate connection, use of a
be felt on the skin or ears during use of headphones, immediately
non-specifi ed cord or extension of the cord may cause heat
stop using them and see a doctor.
generation and a burn or other injuries.
• A person with an ear disease is discommended to use
headphones. Otherwise, the disease may worsen. Should any
Do not use or place the product in the following
abnormality be felt on the skin or ears during use of headphones,
locations:
immediately stop using them and see a doctor.
• A place with high humidity, such as in a bathroom or shower
• Attach and detach headphones around the ears gently and
room. Also do not use this unit in a place subject to water
slowly. Violent attaching or detaching may injure the ear.
splashes. Otherwise, a fi re hazard or battery leak may result.
• Do not approach this unit to heating equipment (a stove, iron,
Handling
etc.). Otherwise, a fi re hazard or battery leak may result.
• Do not apply an excessive force to the display part. Otherwise, it
• Do not place this unit in a place subject to soot or vapor, for
may be damaged.
example in a kitchen or near an air humidifi er, or in a place
• Avoid storing this unit in a bag together with a hard object.
subject to excessive humidity or dust. Otherwise, a fi re hazard or
Otherwise, this unit may be damaged when the bag is pushed.
battery leak may result.
• Do not expose this unit to an insecticide or other volatile
• Do not leave this unit in a place where the temperature may rise
substance or bring this unit in extended contact with a rubber or
abnormally high, for example in a closed automobile or under
vinyl material. Otherwise, discoloration or peeling of the surface
direct sunlight. Otherwise, this unit or its parts may deteriorate or
fi nish may result.
a fi re hazard or battery leak may result.
• Do not put this unit in a pocket of trousers. Otherwise, it may be
damaged due to a strong impact when you sit down, etc.
English
DIGITAL AUDIO RECORDER
MGR-A7
QUICK START MANUAL
Reading the PDF Instruction Manual
The Instruction Manual is saved as a PDF file in the following folder of this unit.
Copy this file into your PC before reading it.
[My Computer] – [KENWOOD_DAP] – [Manual]
Refer to for details.
Declaration of Conformity with regard to the EMC Directive
2004/108/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
EU Representative's:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
© B60-5732-00/00 (E/X)
• Protect this unit against sweat and moisture.
It is the user's responsibility to manage the data in the SD card
Do not use this unit by putting it in a breast pocket for long hours
properly.
in the summer or during exercise. Otherwise, penetration of
SD card (LOCK switch)
moisture or sweat may cause malfunction or failure.
The SD card has a switch for protecting the card against data write.
Set the switch to the LOCK position to protect the data in the card.
Operating conditions
Set the switch to the unlock position before recording, transferring,
Temperature: 5 to 35°C. (without condensation)
editing or erasing the data.
Maintenance of the unit
When the front panel or case becomes dirty, wipe with a soft, dry
cloth.
Do not use thinner, benzine, alcohol, etc. for these agents may
Lock
Unlock
cause discoloration.
Note on the built-in battery
• For the replacement of the built-in battery, contact your dealer.
• The battery built into this unit discharges spontaneously even
when this unit is not used. This means that the built-in battery
may be exhausted completely when this unit is left unused for
a long period. If this happens, recharge the battery before using
this unit.
• The battery recharging time is variable depending on the
condition of the battery and ambient temperature.
• The available playback time reduces when this unit is used under
low temperatures.
• The built-in battery can be recharged for about 500 times. (This is
a reference value and is not guaranteed.)
• The built-in battery is a consumable part, and the available
playback time reduces gradually after repeated use. If the
available playback time becomes very short even after the battery
has been recharged fully, the battery may be degraded; replace it
with new one.
Information on Disposal of Old Electrical
• Kenwood will not assume any liabilities for the alteration or loss of
data caused due to complete discharging of the built-in battery.
and Electronic Equipment (applicable for EU
• The built-in battery is a lithium ion battery.
countries that have adopted separate waste
It is free from the memory eff ect of Ni-Cd and nickel-hydrogen
collection systems)
batteries, with which the capacity decreases if the battery is
Products with the symbol (crossed-out
charged or discharged incompletely for several times.
wheeled bin) cannot be disposed as
The built-in battery therefore accepts additional charging before
household waste.
it has exhausted completely.
Old electrical and electronic equipment
Storage and maintenance of SD card
should be recycled at a facility capable
of handling these items and their waste
Before storage
byproducts. Contact your local authority for
• Be sure to put the SD card in the case before storing it.
details in locating a recycle facility nearest to
• Do not leave the SD card in a place with extremely high
you. Proper recycling and waste disposal will
temperature (under direct sunlight, etc.) or extremely high
humidity.
help conserve resources whilst preventing
detrimental effects on our health and the
When the SD card gets dirty
environment.
• Wipe lightly with a soft cloth, etc.
• Do not use lacquer thinner, benzine or alcohol.
Trademark Information
Other cautions
• Do not open or modify the SD card.
÷ "Microsoft" and "Windows Media" are trademarks or
• Do not peel off the label from the SD card.
registered trademarks of Microsoft Corporation in the
• Do not attach a label or sticker on the SD card.
USA and other countries.
• Do not touch the metallic terminals on the backside with a fi nger
÷ "Adobe Reader" is a trademark of Adobe Systems
or metallic object.
Incorporated.
Note on disposal/transfer of SD card
÷ SDHC logo is a trademark.
The "Format" and "Delete" functions of this unit or a PC simply
change the fi le management information and do not erase the
Other system names and product names are also
data in the SD card completely. Before disposing of or transferring
trademarks or registered trademarks of their respec-
the SD card, it is recommended to destroy it physically or erase
tive developers. Note that the "™" and "®" markings
the internal data completely using commercially available PC data
are omitted in the text of this manual.
erasing software.
Unpacking
Names and functions of parts
Recorder
Headphones
USB cable
AC adaptor
(AC-050150A)
Power cord
Recharging Battery
Cancelling the HOLD function
This unit incorporates a rechargeable battery (hereafter
The HOLD function defeats all of this unit's buttons and helps
referred to as "the battery"), which can be recharged from the
prevent erroneous operation when this unit is carried in a
AC adapter or from a PC connected through USB connection.
bag, etc. The HOLD function should be canceled before using
this unit.
Recharging from the AC adapter
Connect the AC adaptor (provided accessory) to this unit.
Recharging is complete when the CHARGE indicator turns
off.
Recharging completes in about 3 hours.
This unit can be used in playback and recording even when
HOLD canceled
the AC adapter is connected.
HOLD
(Red indication is visible.)
Inserting/removing an SD card
To wall AC outlet
This unit can play music stored in an SD card or recording
Power cord
AC adaptor
music in an SD card.
(provided accessory)
(provided accessory)
Inserting the SD card
• Use the enclosed AC adaptor (AC-050150A) for this product.
1
Switch this unit OFF.
Press and hold the Power/Menu button until the
Recharging and battery indication
pattern shown on the left is displayed.
CHARGE indicator
ON
The indicator lights during recharging.
OFF
The indicator is extinguished when recharging completes.
2
Insert the SD card.
On-screen icons
Shows the remaining power of the battery.
The battery is nearly exhausted.
Connecting stereo headphones
Open the card cover.
Hold the SD card with the label side up and the notched section on the right, and
Connect the provided stereo headphones to this unit.
insert it into the slot until it clicks.
Close the card cover.
Removing the SD card
1
Switch this unit OFF.
Entanglement-prevention slider
2
Take out the SD card.
• When the built-in battery power is low, connect the AC adapter
to this unit.
• Always hold the headphone bodies when attaching
or detaching headphones. Pulling a cord may result in
Open the card cover.
malfunction.
Push the SD card until it clicks and then remove your finger from the card. The card
• To prevent the headphone cord from being entangled, slide the
pops up so that you can pull it out with your fingers.
entanglement-prevention slider to fix the headphone bodies in
position.
Close the card cover.
2
1 Display
#
Left button
• Press to return to the previous (left) display. This can be used
2 EDIT button
for example to return from the playback display to the track
• Press during recording to divide the recorded file at the
list.
position where the button is pressed.
• Press and hold to return to the home screen.
3 CHARGE indicator
3
$
Right button
4 REC EQ button
• Press to enter an item and advance to the next (right) item.
• Press to set the equaliser effect to be applied to the recording
3
7
%
/
Play/Stop button
of the built-in or external microphone.
• Press to play a track or let it stop.
5
/
Power/Menu button
• Press while the menu is displayed to enter a selected item.
• Press and hold to switch the power ON/OFF.
• Press during recording to stop it.
• Press shortly to open the pop-up menu.
^ Right microphone
• Press when the backlight is off to turn it on.
& Center microphone
6 REC button
* Left microphone
• Press to start or let pause the recording of music or voice.
• Status indicated by the REC indicator
( Strap eyelet
Steady lighting
Record mode
• Pass the strap through this hole.
Blink
Record-pause mode
Do not pass a metallic hook or like (a key holder, etc.) through
Extinguished
Stop mode
the strap eyelet. Otherwise, this unit may be damaged.
) MIC MODE switch
7 REPEAT button
• When the built-in microphones are used, set the microphone
• Press to select the repeat mode.
mode to Monaural, 2-Microphone or 3-Microphone.
• During playback, press and hold for more than 1 second to
• When an external microphone is used, set the microphone
set the A-B Repeat points.
mode to Monaural or Stereo.
8 PEAK indicator
_ MIC REC LEVEL switch
9 MIC input jack
• When the built-in microphones or an external microphone
0 LINE-IN jack
is used, set the recording level adjustment method to either
MANUAL or AUTO.
- LINE-OUT jack
+ PLUG IN POWER switch
= DC jack
• Set ON when using an external microphone with the plug-in
~
VOLUME button
power type.
• Press to increase (%) or decrease (fi) the volume. Pressing
¡ HOLD switch
and holding a button segment varies the volume gradually.
• Press to defeat all other buttons. This helps prevent erroneous
!
4
Up button
operation of this unit when it is carried in a bag, etc.
• Press to move the cursor upward.
Phones jack
• Press during playback to skip to the beginning of the current
• Connect the provided stereo headphones.
track. Pressing the button at the beginning of a track skips to
£
the beginning of the previous track.
USB jack
• Press and hold to fast reverse the music.
• Connect to a PC using the provided USB cable to transfer
• Press during playback to increase the recording level
music files or recharge the battery.
(provided that the MANUAL recording level adjustment is
¢ Reset button
selected).
• In case of irregularity, first consult (the
¢
@
Down button
PDF manual). If an optimum remedy is not found, try pressing
• Press to move the cursor downward.
the reset button with the tip of a clip.
• Press during playback to skip to the beginning of the next
track.
• Press and hold to fast forward the music.
• Press during playback to decrease the recording level
∞ SD card slot cover
(provided that the MANUAL recording level adjustment is
selected).
Setting the display language
• When the SD card is inserted,
is displayed on the screen
during playback and recording.
• A special adapter is required to use a miniSD card, miniSDHC
1
Open the home screen. Select "Settings" >
card or microSD card.
"Language".
• The MultiMedia Card (MMC) cannot be used.
Artist
Genre
Album
Year
Track
Folder
Switching Power ON/OFF
Favorite
Recorded
1sec.
Genre
Recording
Year
Settings
1
Switch this unit ON.
Settings
Press and hold the Power/Menu button until the
Lighting time
LCD Contrast
KENWOOD logo is displayed.
Auto power off
Beep
Language
2
Select the language.
2
Switch this unit OFF.
Select the desired language.
Language
Press and hold the Power/Menu button until the
日本語
ENGLISH
pattern shown on the left is displayed.
DEUTSCH
FRANCAIS
ESPAÑOL
Enter
Enter
Setting the date and time
Regarding the usage of an SD
card
1
Open the home screen. Select "Settings" >
"Clock setting".
While using an SD card, it may take some time to move on to
Artist
Genre
the next step after the operations below because of update of
Album
Year
Track
Folder
file database in the SD card.
Favorite
Recorded
While an SD card is loaded in this unit
1sec.
Genre
Recording
Year
Settings
• The power is turned on.
• A USB cable is disconnected.
Settings
Beep
• Recording or fi le editing is completed.
Language
When an SD card is inserted or removed
Format
Prioritized Drive
Clock setting
2
Set Year, Month, Day and Hour.
Clock setting
08
02 29
Y
M
D
01 23
H
M
Clock setting
For each of Month, Day and Hour, press
Year Month Day
/
to select the desired figure
08
02
29
Y
M
D
and press
to move to the next item.
Hour
01 23
Minute
H
M
3
Set Minute.
Clock setting
Press
from "00" sec.
08
02 29
Y
M
D
01
23
H
M
Enter
Enter
• Press the Left button to return to the previous display page.
to start the time count
loading

Summary of Contents for Kenwood MGR-A7

  • Page 1 Otherwise, a fi re or electric shock may result. Information on Disposal of Old Electrical electric shock. • Kenwood will not assume any liabilities for the alteration or loss of Insert the SD card. While an SD card is loaded in this unit 1sec.
  • Page 2 If you delete the PDF file by cable or RCA pin plug – stereo miniplug adapter (commercially mistake, you can transfer it from the Kenwood website. available in audio stores), according to the output terminals of the external microphone or audio component.