Cisco Physical Access 1125 Manual

Overview

This chapter provides a basic functional overview of the Cisco Physical Access Manager (Cisco PAM)

1125 appliance and describes the hardware, major components, and front and back panel indicators and

controls.

The Cisco 1125 appliance is installed with Cisco PAM 1.0.0 and 1.1.0. This User Guide provides a

Note

reference for existing installations. For new installations of Cisco PAM Release 1.2.0 or higher, see the

Cisco Physical Security Multi Services Platform User Guide.

•

Front View and Overview

Figure 1-1

OL-20929-01

Front View and Overview, page 1-1

Identifying Chassis Components, page 1-2

shows the appliance front view.

Cisco PAM Appliance

C H A P T E R

Cisco Physical Access 1125 Appliance User Guide

Cisco Physical Access Manager

1-1

Page 1 1125 appliance and describes the hardware, major components, and front and back panel indicators and controls. The Cisco 1125 appliance is installed with Cisco PAM 1.0.0 and 1.1.0. This User Guide provides a Note reference for existing installations. For new installations of Cisco PAM Release 1.2.0 or higher, see the Cisco Physical Security Multi Services Platform User Guide.
Page 2 Chapter 1 Overview Table 1-1 summarizes the features of the Cisco PAM appliance hardware. Table 1-1 Cisco PAM 1125 Appliance Feature Summary Feature Description Processor Processor and Front Side Bus (FSB) support ® • Supports the following Intel processors: Core 2 Duo E6400 (2.13 GHz) –...
Page 3 USB 0-1 Serial Port PCI Add-in Card Slot Video ETH LED Indicators The rear of the Cisco PAM appliance system includes LEDs that indicate the activity and speed of connection for the ETH ports (see Figure 1-4). Figure 1-4 ETH port LEDs...
Page 4 No network connection Solid Amber Network connection in place Blinking Amber Transmit/receive activity Right 10 Mbps connection (if left LED is on or blinking) Solid Amber 100 Mbps connection Solid Green 1000 Mbps connection Cisco Physical Access 1125 Appliance User Guide OL-20929-01...