INSTALLATION INSTRUCTIONS The keypad is designed to control the DOMONIAL panel series. It features a proximity tag reader and an integrated siren for deterrent action and is used to arm and disarm your security system. FEATURES Total Setting (①) / Part Setting (②) / Annex Setting (key “7” + key “9”) ...
BATTERY REPLACEMENT The keypad signals a battery failure at the control panel when the battery needs to be replaced. The system fault LED lights on to signal locally the battery fault to the user (please refer to the User guide to know the different Status LEDs meanings). The keypad will continue to operate for up to one month after this.
Page 4
In programming mode, it is possible to: Set arming with identification: 1. Press “Total arming” button to select function 2. Press (④) to activate arming with identification (code and TAG) Set quick arming: 1. Press “Total arming” button to select function 2.
SPECIFICATIONS Unit Dimensions: 112.5 x 175.5 x 25 mm (with bracket) Weight: 259g without batteries; 290g with batteries Battery: 2x CR123A 3-Volt Lithium Battery Life: 4 years Tamper: Pry off and case opening tamper Radio Frequency: 868 MHz.