Sony CFD-E10 Operating Instructions

Personal audio system

Hide thumbs Also See for CFD-E10:

Service manual (34 pages)

Operating instructions manual (9 pages)

Specifications (2 pages)

page of 2

/ 2

Available languages

Quick Links

Troubleshooting

General

Radio

The power does not

The audio is weak or

come on.

has poor quality.

• Connect the AC power adaptor

• Replace all the batteries with new

securely.

ones if they are weak.

• Make sure the batteries are inserted

• Move the player away from the

correctly.

TV.

• Replace all the batteries with new

The picture of your TV

ones if they are weak.

becomes unstable.

There is no audio.

• If you are listening to an FM

• Unplug the headphones when

program near the TV with an

listening through speakers.

indoor antenna, move the player

Noise is heard.

away from the TV.

• Someone is using a portable

After trying the above remedies, if

telephone or other equipment that

you still have problems, unplug the

emits radio waves near the player.

tMove the portable telephone,

AC power adaptor and remove all

the batteries. After all the

etc., away from the player.

indications in the display

disappear, plug the AC power

CD Player

adaptor and insert the batteries

The CD does not play

again. If the problem persists,

please consult your nearest Sony

or "– –" lights in the

dealer.

display even when a

CD is in place.

• Place the CD with the label surface

facing you.

• Clean the CD.

• Take out the CD and leave the CD

compartment open for about an

hour to dry moisture condensation.

• The CD-R/CD-RW was not

finalized. Finalize the CD-R/CD-

RW with the recording device.

• There is a problem with the quality

of the CD-R/CD-RW, recording

device or application software.

The sound drops out.

• Reduce the volume.

• Clean the CD, or replace it if the

CD is badly damaged.

• Place the player in a location free

from vibration.

• Clean the lens with a commercially

available blower.

• The sound may drop out or noise

may be heard when using poor

quality CD-Rs/CD-RWs or if there

is a problem with the recording

device or application software.

Lens

Location of controls

i (headphones)

TUNING

MEGA BASS

FUNCTION

VOL*

OPERATE

PLAY MODE

OPR/BATT

PUSH CLOSE

Display

DC IN 6V

* There is a tactile dot beside VOL to show the direction

to turn up the volume.

** The u button has a tactile dot.

To listen through headphones

Connect the headphones to the i (headphones) jack.

To reinforce the bass sound

Set MEGA BASS to "ON".

To return to normal sound, set the switch to "OFF".

Precautions

On safety

On operation

• As the laser beam used in the CD

• If the player is brought directly

player section is harmful to the

from a cold to a warm location, or

eyes, do not attempt to disassemble

is placed in a very damp room,

the casing. Refer servicing to

moisture may condense on the

qualified personnel only.

lenses inside the CD player section.

• Should any solid object or liquid

Should this occur, the player will

fall into the player, unplug the

not operate properly. In this case,

player, and have it checked by

remove the CD and wait about an

qualified personnel before

hour for the moisture to evaporate.

operating it any further.

• Discs with non-standard shapes

If you have any questions or

(e.g., heart, square, star) cannot be

problems concerning your player,

played on this player. Attempting

please consult your nearest Sony

to do so may damage the player.

dealer.

Do not use such discs.

Notes on CDs

Cleaning the cabinet

• Before playing,

• Clean the cabinet, panel and

clean the CD

controls with a soft cloth slightly

with a cleaning

moistened with a mild detergent

cloth. Wipe the

solution. Do not use any type of

CD from the

abrasive pad, scouring powder, or

center out.

solvent, such as alcohol or benzine.

• Do not use solvents such as

On power sources

benzine, thinner, commercially

available cleaners or anti-static

• For AC

spray intended for vinyl LPs.

operation, use

• Do not expose the CD to direct

the supplied

sunlight or heat sources such as hot

AC power

Polarity of

air ducts, nor leave it in a car

adaptor; do not

the plug

parked in direct sunlight as there

use any other type.

can be a considerable rise in

• The player is not disconnected

temperature inside the car.

from the AC power source (mains)

• Do not stick paper or sticker on the

as long as it is connected to the

CD, nor scratch the surface of the

wall outlet, even if the player itself

CD.

has been turned off.

• After playing, store the CD in its

• For battery operation, use four R6

case.

(size AA) batteries.

If there is a scratch, dirt or

• When the batteries are not to be

fingerprints on the CD, it may

used, remove them to avoid

cause tracking error.

damage that can be caused by

battery leakage or corrosion.

• The nameplate indicating operating

voltage, power consumption, etc. is

located at the bottom.

On placement

• Do not leave the player in a

location near heat sources, or in a

place subject to direct sunlight,

excessive dust or mechanical

shock.

• Do not place the player on an

inclined or unstable place.

• Do not place anything within 10

mm of the side of the cabinet. The

ventilation holes must be

unobstructed for the player to

operate properly and prolong the

life of its components.

• If the player is left in a car parked

in the sun, be sure to choose a

location in the car where the player

will not be subjected to the direct

rays of the sun.

• Since a strong magnet is used for

the speakers, keep personal credit

cards using magnetic coding or

spring-wound watches away from

the player to prevent possible

damage from the magnet.

Choosing Power

Sources

Connecting the AC power

adaptor

to DC IN

to the

mains

AC power

adaptor

(supplied)

To adjust the voltage (Tourist model

only)

Before using the AC power adaptor, set it to the

voltage of the local AC power supply, "110 V - 120 V"

or "220 V - 240 V".

Use a screw driver to

turn the rotary switch.

Using the player on batteries

Insert four R6 (size AA) batteries (not supplied) into

the battery compartment.

To release the battery

Press the # side of the battery and then take out the

battery.

If the battery compartment lid comes

off

Insert the right corner of the lid and then insert the left

corner aligning it to the groove of the battery

compartment.

Tip (Tourist model only)

Use the supplied AC plug adaptor if the plug of the AC

power adaptor does not match your outlet.

Notes

• To use the player on batteries, disconnect the AC power

adaptor from the player. The player does not operate on

batteries as long as the AC power adaptor is connected.

• Replace the batteries when the OPR/BATT indicator

dims or when the player stops operating. Replace all

batteries with new ones.

• The voltage selector of the AC power adaptor is not the

switch to turn on/off the power (Tourist model only).

Personal

Audio

System

Operating Instructions

Manual de instrucciones

(en la cara inversa)

CFD-E10

3-234-994-24(1)

Specifications

CD player section

System

Compact disc digital audio system

Laser diode properties

Material: GaAlAs

Wave length: 780 nm

Emission duration: Continuous

Laser output: Less than 44.6 µW

(This output is the value measured at a

distance of about 200 mm from the

objective lens surface on the optical

pick-up block with 7 mm aperture.)

Spindle speed

200 r/min (rpm) to 500 r/min (rpm)

(CLV)

Number of channels

Frequency response

20 - 20 000 Hz +1/–2 dB

Wow and flutter

Below measurable limit

Playing a CD

Turn on the player.

Press Z to open the CD compartment.

Place a CD in the CD compartment.

12 cm CD

8 cm CD

Push down until it

Insert aligning the

clicks into place.

center part.

With the label side facing you

Press PUSH CLOSE to close the the lid

of the CD compartment.

Set FUNCTION to "CD".

Display

Total track number

Press u.

The player plays all the tracks once.

Track number

WARNING

English

Do not install the appliance in a

confined space, such as a

WARNING

bookcase or built-in cabinet.

To prevent fire or

To prevent fire or shock hazard,

do not place objects filled with

shock hazard, do not

liquids, such as vases, on the

expose the player to

appliance.

rain or moisture.

To avoid electrical

shock, do not open

the cabinet. Refer

servicing to qualified

personnel only.

Radio section

General

Frequency range

Speaker

Full range: 5.7 cm dia., 2.7 Ω, cone

FM: Italy and tourist model:

87.5 - 108 MHz/Other countries:

type (2)

87.5 - 107 MHz

Outputs

AM: Italy: 526.5 - 1 606.5 kHz/

Headphones jack (stereo minijack)

Tourist model: 530 - 1 710 kHz/

For 8 - 32 Ω impedance

Other countries: 530 - 1 611 kHz

headphones

Maximum power output

FM: 10.7 MHz

2 W

AM: 455 kHz

Power requirements

Aerials

DC IN 6 V jack accepts: Supplied AC

FM: Telescopic aerial

power adaptor for use with:

AM: Built-in ferrite bar aerial

– 110 - 120 V, 220 - 240 V AC

selectable, 50/60 Hz (Tourist model)

– 230 V AC, 50 Hz (Other models)

6 V DC, 4 R6 (size AA) batteries

Power consumption

DC 13 W

Battery life

When playing a CD:

Sony R6P: approx. 2 hours

Sony alkaline LR6: approx 4 hours

Dimensions

Approx. 315 × 131 × 70 mm (w/h/d)

× 5

× 2

(12

⁄

projecting parts)

Mass

Approx. 920 g (2 lb.) (incl. batteries)

Supplied accessory

AC power adaptor (1)

Design and specifications are subject to

change without notice.

Do this

adjust the volume

Slide VOL.

stop playback

Press x.

pause playback

Press u.

Press the button again to resume

play after pause.

go to the next track

Press >.

go back to the

Press ..

previous track

locate a point while

Press > (forward) or .

listening to the sound

(backward) while playing until

you find the point.

remove the CD

Press x, then Z.

turn off the player

Set OPERATE to "OFF".

To remove the CD

Be careful not to touch the

playing side (the side with

no label).

Selecting play mode

Set FUNCTION to "CD".

Press PLAY MODE until the play mode you want

appears in the display. Then proceed as follows:

Selected play mode and

operation you need

repeat a single track

"REP 1": Select the track you

want to repeat by pressing >

or . and then press u.

repeat all tracks

"REP ": Press u.

shuffle play

"SHUF ": Press u.

repeat tracks in

"SHUF REP ": Press u.

random order

To cancel selected play mode

Press PLAY MODE until the selected play mode

disappears from the display.

About CD-Rs/CD-RWs

This CD player can play CD-Rs/CD-RWs recorded in

the CD-DA format*, but playback capability may vary

depending on the quality of the disc and the condition

of the recording device.

* CD-DA is the abbreviation for Compact Disc Digital

Audio. It is a recording standard used for Audio CDs.

Optional accessories

Sony MDR headphone series

⁄

inches) (incl.

Listening to the

radio

Turn on the player.

Set FUNCTION to "FM STEREO" or

"AM".

Turn TUNING to tune in a radio station.

Do this

adjust the volume

Slide VOL.

turn off the radio

Set OPERATE to "OFF".

To improve broadcast reception

Reorient the aerial for FM. Reorient the player itself

for AM.

Tip

If the FM broadcast is noisy, set FUNCTION to "FM

MONO". The radio will play in monaural.

Summary of Contents for Sony CFD-E10

Page 1: Troubleshooting
When playing a CD: • Since a strong magnet is used for Sony R6P: approx. 2 hours the speakers, keep personal credit Sony alkaline LR6: approx 4 hours cards using magnetic coding or Dimensions spring-wound watches away from Approx. 315 × 131 × 70 mm (w/h/d) the player to prevent possible ×...
Page 2 MHz/Otros países: 87,5 - 107 MHz pistas. muy dañado. Serie de auriculares MDR de Sony • La placa donde se indica el voltaje Propiedades del diodo láser AM: Italia: 526,5 - 1 606,5 kHz/ Salidas • Coloque el reproductor en un lugar...