Quick Links
HBS01 REMOTE CONTROLLER OPERATION MANUAL
External View of Remote Controller
Loading of the battery
1. Remove the battery cover;
2. Insert AAA batteries (included) loading is in
line with the "+"/ "-";.
3. Replace cover
Functional description
1. Power-up and Show All: After inserting the batteries the display
will show all symbols for 3 seconds. The remote will then enter clock
set mode. Use "+/-" to adjust the clock. Press "Confirm" when done.
If no action is taken within 10 seconds then the remote will exit set
mode. See section 22 for clock setting instruction.
2. ON/OFF Button: Press the ON/OFF button on the remote control
to start the unit.
3. SMART Button:
(1) In SMART mode the air conditioner will automatically switch
between Cool, Heat, or Fan to maintain set temperature.
(2) When the fan is set to AUTO the air conditioner automatically
adjusts the fan speed according to room temperature.
(3) The SMART button also works to power the unit on and off.
4. COOL Button, HEAT Button and DRY Button
(1) In COOL mode ,the unit operates in cooling. When FAN is set
to AUTO,the air conditioner automatically adjusts the fan speed
according to room temperature. COOL will be displayed during COOL
mode.
(2) In HEAT mode ,warm air will blow out after a short period of
the time due to cold-air prevention function. When FAN is set to
AUTO,the air conditioner automatically adjusts the fan speed
according to room temperature. HEAT will be displayed during HEAT
mode.
(3) DRY mode is used to reduce humidity.In DRY mode, when room
temperature becomes lower than temp. setting+2
intermittently at LOW speed regardless of FAN setting. DRY will be
displayed during DRY mode.
Initial TEMP.
Initial Fan Speed
5. FAN SPEED Button:
Fan speed selection
Press FAN SPEED button. For each press,fan speed changes as
follows:
LOW
The air conditioner fan will run according to the displayed fan speed.
When FAN is set to AUTO,the air conditioner automatically adjusts
the fan speed according to room temperature.
6. TEMP. +/- Buttons:
Temp+ Every time the button is pressed,the temperature setting
increases.
Temp- Every time the button is pressed,temperature setting decreas-
es.
The operating temperature range is 60°F -86°F (16°C-30°C).
7. Quadrant Control
(Available for some models):
This setting allows the vertical airflow to be adjusted individually on
each side of the unit.
(1) Initial default positions.
Selected
Quadrant
Vertical
SWING Angle
(2) Press the Quadrant Control button to select the quadrant. Each
button press will select as shown bellow:
(3) Once desired quadrant is selected then use the Vertical Swing
button to set the direction of airflow. See section 9.
<1>
<2>
<3>
Mode
SMART HEAT
24°C
24°C
(75°F)
(75°F)
Mode
SMART HEAT
AUTO
LOW
MED
HI
SMART
HEAT
Show all
Show all
Position 3 Position 5 Position 3 Position 3 Position 3
,unit will run
°F
COOL
DRY
FAN
24°C
24°C
Setting temperature
(75°F)
(75°F)
is not showed.
COOL
DRY
FAN
HI
AUTO
LOW
LOW, MED and HIGH
indicator cycles.
AUTO FAN SPEED
COOL
DRY
FAN
Show all
Show all
Show all
Related Manuals for Haier HBS01
Summary of Contents for Haier HBS01
- Page 1 HBS01 REMOTE CONTROLLER OPERATION MANUAL External View of Remote Controller Functional description 1. Power-up and Show All: After inserting the batteries the display will show all symbols for 3 seconds. The remote will then enter clock set mode. Use “+/-“ to adjust the clock. Press “Confirm” when done.
- Page 2 8. Vertical SWING Buttion switch fan to BREEZE. Press QUIET button again to cancel function. Air Flow Direction Adjustment Note: Press the SWING UP/DOWN button to choose the position of the TURBO/QUIET modes are only available when the unit is under vertical airflow louvers.