Available languages
Available languages
Quick Links
For use with Craftsman 315 MHz or 390 MHz garage door openers manufactured after
January 1, 1993. The garage door opener activates when the programmed button on the
remote control is pressed. The remote control can activate up to three garage door openers.
Make sure the garage door opener has a working light bulb because it is a programming
indicator.
MODEL 139.18802
LED
PREPARE
PROGRAM THE REMOTE CONTROL (139.18802)
1
Press and hold the program button
the remote control until the LED on
the front of the remote control
turns on.
4
Press and release the Learn
button on the garage door
opener.
Learn
Button
The Learn LED will light.
Within 30 seconds...
MODEL 139.18803
Learn
OR
LED
Green
or
Learn
LED
Red/Orange
Purple
2
Press and release the remote control button you wish to use the
number of times that corresponds with the garage door opener type:
# of Presses
1
2
3
4
5
Press the remote control button
programmed in step 2 until the
garage door opener lights flash
or two clicks are heard.
MODELS 139.18802 AND 139.18803
LED
Locate the Learn
button on the garage
door opener.
NOTE: Your garage door
opener may look different.
OR
Learn
LED
Yellow
Garage Door Opener Type
Security+ 2.0
TM
(Yellow Learn Button)
®
315 MHz Security+
(Purple Learn Button)
390 MHz Security+
®
(Red/Orange Learn Button)
390 MHz Billion Code (Green Learn Button)
6
To test, press the programmed
button on the remote control...
3-BUTTON REMOTE CONTROLS
To prevent possible SERIOUS INJURY or
DEATH from a moving gate or garage door:
• ALWAYS keep remote controls out of
reach of children. NEVER permit children
to operate or play with remote controls.
• Activate gate or door ONLY when it can be
seen clearly, is properly adjusted and there
are no obstructions to door travel.
• ALWAYS keep gate or garage door in sight
until completely closed. NEVER permit
anyone to cross path of moving gate or
door.
Locate the Program button on the
remote control.
Program Button
139.18802
3
To exit programming mode,
press any remote control
button except the button
that was just programmed.
7
Install the visor clip.
The garage door
opener will activate.
139.18803
Program Button
Related Manuals for Craftsman 139.18802
Summary of Contents for Craftsman 139.18802
- Page 1 3-BUTTON REMOTE CONTROLS MODELS 139.18802 AND 139.18803 For use with Craftsman 315 MHz or 390 MHz garage door openers manufactured after January 1, 1993. The garage door opener activates when the programmed button on the remote control is pressed. The remote control can activate up to three garage door openers.
- Page 2 Visor Clip 1-800-4-MY-HOME ® (1-800-469-4663) (Model 139.18802 ONLY) ....... 29B137...
- Page 3 TÉLÉCOMMANDES 3 BOUTONS MODÈLES 139.18802 ET 139.18803 Pour une utilisation avec les ouvre-portes de garage Craftsman 315 MHz ou 390 MHz, fabriqués après le 1er janvier 1993. L’ouvre-porte de garage est active lorsqu’on appuie sur le bouton programmé de latélécommande. La télécommande activera jusqu’à 3 ouvre-portes de garage.
- Page 4 1-800-LE-FOYER (1-800-533-6937) (modèle 139.18802 UNIQUEMENT) ....... 29B137 AVERTISSEMENT ® Registered Trademark / ™ Trademark / Service Mark of Sears, Roebuck and Co.