1. Manuals
  2. Brands
  3. Cisco Manuals
  4. IP Phone
  5. 7821
  6. User manual

Cisco 7821 User Manual

Hide thumbs Also See for 7821:

Quick Links

See also: Administration Manual , User Manual
Home
PBXware
SERVERware
TELCOware
SIPmon
SIPProt
Desktop & Mobile
UADs
Appliances
From Bicom Systems Wiki
Contents
1 Cisco 7821 User Guide
Cisco 7821 User Guide
This User Guide is written as general guide on how to set up the Cisco 7821 to work with
PBXware.
loading

Related Manuals for Cisco 7821

Summary of Contents for Cisco 7821

  • Page 1: Table Of Contents

    3.1 Power Adapter 3.2 IP Address 3.3 Factory Settings 4 Registering Device 4.1 Manual Configuration 4.2 Auto Provisioning Cisco 7821 User Guide This User Guide is written as general guide on how to set up the Cisco 7821 to work with PBXware.

  • Page 2: Requirements

    2. device firmware Make sure that your device is loaded with appropriate firmware version, 11.0.1. For Cisco 7821 press settings button, then type 61 to check the version of the software. 3. DHCP server Fully configured and operational DHCP server.

  • Page 3: Power Adapter

    LAN. IP Address 1. Find out your Cisco 7821 IP Address For Cisco 7821, press settings button then type 62 to check ip address of the phone. Factory Settings 1. Reset to factory settings This step is not required for out-of-the-box devices, however, if the device has been already used then it is a must.
  • Page 4 2. UAD settings Navigate to Settings:UAD. Make sure Cisco 7821 UAD is enabled. To check the UAD status click on the edit icon corresponding to your Cisco phone. Make sure Status is set to Active, Auto provisioning is set to No, and DHCP is set to Yes.
  • Page 5 "1234" or "1003" etc. An auto-generated PIN will allow access to voicemail and online self-care. Registering Phone This chapter describes how to register Cisco 7821 device using Hostname or IP Address. Hostname or IP Address 1. Login to device web administration interface Open a new browser window and enter your phone IP address in order to access the device web administration interface login screen.

  • Page 6: Auto Provisioning

    Click on Admin Login in the top right corner of the administration interface. Click on Advanced in the top right corner of the administration interface. Click on Voice on the main menu. Click on Ext 1 on the sub menu. Enter or set the following details into the respective fields.
  • Page 7 2. UAD settings Navigate to Settings:UAD. Make sure Cisco 7821 UAD is enabled. To check the UAD status click on the edit icon corresponding to your Cisco phone. Make sure Status is set to Active, Auto provisioning is set to Yes, and DHCP is set to Yes.
  • Page 8 Click on the Save button. Creating Extension Registering Phone This chapter describes how to register Cisco 7821 device using DHCP, TFTP or HTTP. The following topics are covered: - DHCP - TFTP or HTTP DHCP 1.
  • Page 9 Click on Voice at the top navigation menu. Click on Provisioning sub menu. You can use TFTP or HTTP protocols in order to Auto Provision your Cisco SPA device. Choose which protocol you want to use: - TFTP - HTTP...
  • Page 10 In the Profile Rule field enter: - Example for Hostname using HTTP: [--uid http-username --pwd http-password]http://voip.bicomsystems.com/prov/$MA.cfg - Example for IP Address using HTTP: [--uid http-username --pwd http-password]http://10.1.70.150/prov/$MA.cfg Make sure you replace Hostname or IP Address from this example with your PBXware Hostname or IP address.