Table of Contents
Quick Links
Table of Contents
Related Manuals for Philips AEH2900
Summary of Contents for Philips AEH2900
- Page 1 User manual (AEH2900, AEH2110, AEH2120, AEH2130, AEH2310)
-
Page 3: Table Of Contents
Contents 1 Important safety instructions Safety Important Safety Instructions Compliance Care of the environment Notice Written Offer 2 Overview Motion sensor Door and window sensor Temperature and humidity sensor Intelligent switch Status indicator 3 Setup Join your Smart Home network Install or replace batteries Plug the Intelligent switch Reset... - Page 4 Find a right location Use the mounting kit Use the adhesive tape Place the Door and window sensor 5 Use Philips Smart Home app Manage devices Set the device Check device status Delete the device Set the rules of home automation...
-
Page 5: Important Safety Instructions
Important safety instructions Safety CAUTION : For INDOOR USE ONLY! DO NOT use this Intelligent switch with non-resistive loads, such as motors, compact fluorescent light (CFL) bulbs or fluorescent lighting.To reduce the risk of electric shock, this Intelligent switch has a third (grounding) pin. As a grounding type plug, this Intelligent switch only fits into a grounding type power outlet. -
Page 6: Compliance
Compliance Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Notice for the USA This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. -
Page 7: Care Of The Environment
Notice Disclaimer Your use of Philips Smart Home is at your sole risk. Gibson Innovations and • its subsidiary companies (individually and collectively “Gibson Innovations”) are not responsible for the operation of such Philips Smart Home or your use thereof and Gibson Innovations shall have no liability to you related thereto. -
Page 8: Written Offer
This offer is valid up to three years after product purchase. To obtain source code, please contact [email protected]. If you prefer not to use email or if you do not receive confirmation receipt within a week after mailing to this email... -
Page 9: Overview
Overview With the Smart Home devices and Philips Smart Home app, you can have the changes at your home monitored, and set rules to have the connected home appliance powered on or off automatically according to the changes. Motion sensor The Motion sensor detects the movement of people at home. -
Page 10: Temperature And Humidity Sensor
AEH2120 a Status indicator b Alignment mark Temperature and humidity sensor The Temperature and humidity sensor detects the temperature and humidity at home. AEH2130 a Status indicator... -
Page 11: Intelligent Switch
Intelligent switch The Intelligent switch powers on or off the connected appliance at home. AEH2310 a Power on/off b Power indicator c Status indicator d Setup button Status indicator Indicator Status of the device Start-up From amber to red Ready for pairing (for a device that has never been paired with the Bridge, or a device that has been restored to factory settings) Flashing amber... - Page 12 Solid green for less than An event that triggers notifications happens. one second Flashing red Disconnected Flashing red and green Firmware updating underway alternately Low battery Solid red for three sec- Battery to be replaced onds, and then, flashing red...
-
Page 13: Setup
Setup Join your Smart Home network On your mobile device, download and install the Philips Smart Home app. Philips Smart Home Smart Home Get started Smart Home Demo Follow the onscreen instructions to get connected to the Bridge. Follow the onscreen instructions to add your Smart Home devices to the Bridge. -
Page 14: Install Or Replace Batteries
All devices No device has connected Add devices Search Home Rules Settings Note • The device exits the pairing mode after three minutes. To re-enter the pairing mode, open the battery door and close it as described in Step 3. Install or replace batteries To install or replace batteries on your Smart Home devices, do the following:... - Page 15 Motion sensor Door and window sensor Temperature and humidity sensor...
-
Page 16: Plug The Intelligent Switch
Plug the Intelligent switch To add the Intelligent switch to the Bridge, do the following: Insert the Intelligent switch into a power outlet properly. Press and hold the Setup button until the status indicator turns from amber to red. -
Page 17: Reset
Push to close the battery door. Release the door when the status indicator flashes in amber. With the Philips Smart Home app, add the device to the Bridge (see 'Join your Smart Home network' on page 11). On the Intelligent switch, do the following:... -
Page 18: Restore Factory Settings
With the Philips Smart Home app, add the device to the Bridge (see 'Join your Smart Home network' on page 11). Restore factory settings Restore factory settings when: • you want to connect your device to another Bridge. On the sensor, do the following: Delete the device from the Bridge (see 'Delete the device' on page 25). - Page 19 • If you press and hold the setup button for more than six seconds, the status indicator turns off. To restore factory settings, re-do Step 1.
-
Page 20: Place
Place • Use the Smart Home devices in an indoor environment. • Keep such devices from exposure to moisture, direct sunlight, or excessive heat. • To ensure good connection, check the distance and obstacles, such as walls, between the Bridge and devices. Place the Motion sensor Find a right location •... -
Page 21: Use The Adhesive Tape
>30mm • In Step 2, use the screw holder for a concrete wall or surface. For a wooden surface, you can the screw only. Use the adhesive tape You can also use the adhesive tape mount the sensor as needed. -
Page 22: Place The Door And Window Sensor
Place the Door and window sensor • Avoid the exposure to moisture and direct sunlight. • Use the alignment marks to align the two components. • Mount the two components securely just in case any one of them may drop during movement. -
Page 25: Use
Philips Smart Home app Through the Philips Smart Home app you can set up the Smart Home devices, set rules of home automation, and continue to monitor changes and control the devices on a mobile device while you are away from home. -
Page 26: Manage Devices
Manage devices Set the device You can edit the device information by attaching a photo and naming the location. • On the Home screen, tap the device to edit the device information. • For the Motion sensor, select the sensitivity level as needed. •... -
Page 27: Delete The Device
Delete the device Delete the device when: • you want to remove the device from the Bridge. • you want to restore the factory settings of the device. (see 'Restore factory settings' on page 16) From the Home Screen, select the device. Tap the option to delete the device. -
Page 28: Set The Rules Of Home Automation
Set the rules of home automation To set a rule of home automation, set an event or time/ location as trigger. Then, set an action that is associated with the trigger. Set the trigger From the Home screen, go to . -
Page 29: Edit The Rules
Edit the rules • From the Home screen, tap . Select a rule to edit or delete it. -
Page 30: Access The Devices Remotely
Access the devices remotely To access your Smart Home devices remotely, log in to the portal. The first time you log in to the portal, create your account. -
Page 31: Check For Updates
Check for updates For updates of your Smart Home devices and the Philips Smart Home app, you can receive messages on your mobile device. Follow the onscreen instructions to complete the updating. -
Page 32: Technical Data
Technical data Sensors (for indoor use only) Power • Two AAA alkaline batteries Connectivity • Zigbee Motion sensor Detection method • Passive Infra red Door and window sensor Operating temperature & humidity • 32°F to 104°F (0°C to 40°C), 10% to 90% Temperature and humidity sensor Operating temperature &... - Page 34 This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.