1. Manuals
  2. Brands
  3. RAM Manuals
  4. Water Pump
  5. 339610-1
  6. Service manual

RAM 339610-1 Service Manual

Low-pressure transfer pump
Hide thumbs

Quick Links

Description
The major components of model 339610-1 transfer pump
consist of an air-operated motor (equipped with a shut-off
valve) and a pump tube. The air motor connects directly to
the double-acting reciprocating pump tube.
This low-pressure (1:1 ratio) transfer pump is designed to
deliver a range of light weight oils including gear lubricants.
Mounting
This pump mounts directly onto original containers or
bulk tanks that have a 2 " NPTF bung fitting. The required
length downtube screws directly into the 1-1/2 " NPTF
female threads in the valve body.
As an alternative, the pump can also mount to a wall
(with the use of a wall bracket) and be used with an optional
suction hose. See Table 2 for details.
Also, the pump screws directly onto two different size
threaded standpipes [1-1/2 " NPTF (m) or 2 " NPTF (f)].

Specifications

Air Motor
Piston Diameter x Stroke
Inches
Centimeters
3 x 3-5/16
7.6 x 8.4
For details on the air motor, refer to Service Guide SER 339413
Pump Tube
Max. Material
Delivery/Minute
Pressure
(Approximate) *
psi
Bars
Gallons
Liters
150
10.3
16
60.6
* For detailed information, refer to Figure 3.
Table 1 Model 339610-1 Specifications
This document contains confidential information that is the property of Alemite, LLC
670854
and is not to be copied, used, or disclosed to others without express written permission.
1-800-548-1191 - http://www.partdeal.com - [email protected]
Service Guide
Low-Pressure Transfer Pump
Maximum Air
Pressure
Air Inlet
psi
Bars
1/4 " NPTF (f)
150
10.3
Material Outlet
w/Bushing
w/o Bushing
1/2 " NPTF (f)
3/4 " NPTF (f)
Alemite, LLC
167 Roweland Drive, Johnson City, Tennessee 37601
www.alemite.com
©
Copyright
2005 by Alemite, LLC
Overall Height
Inches
Cm
18
45.7
Figure 1 Low-Pressure Transfer Pump Model 339610-1
339610-1
Weight
lbs
kg
14.7
6.7
SER 339610-1
Revision (8-06)
loading

Summary of Contents for RAM 339610-1

  • Page 1: Specifications

    Service Guide 339610-1 Low-Pressure Transfer Pump Description The major components of model 339610-1 transfer pump consist of an air-operated motor (equipped with a shut-off valve) and a pump tube. The air motor connects directly to the double-acting reciprocating pump tube.
  • Page 2 SER 339610-1 Low-Pressure Transfer Pump Figure 2 Low-Pressure Transfer Pump Model 339610-1 - Exploded View Revision (8-06) 1-800-548-1191 - http://www.partdeal.com - [email protected]...
  • Page 3 Low-Pressure Transfer Pump SER 339610-1 Item Numeric Order Part No. Description Notes Part # (Item #) Motor Assembly, Air See SER 339413 14536 340053 Cover (w/o Decals) (24) 51929 Screw, Cap, 1/4 " -20 x 6-1/2 " (20) 170710 Included w/ Motor Assembly Bolt, Carriage, 1/4 "...

  • Page 4: Performance Curves

    SER 339610-1 Low-Pressure Transfer Pump Accessories Drum Tank Extension Description 250-Gallon 275-Gallon 16-Gallon 55-Gallon Bench-Top Obround V-Cut 338147-3 338147-4 338147-8 338147-9 Threaded at both ends * 338246-3 338246-4 338246-8 338246-5 * NOTE: For use with low level cut-off valve part number 321206...
  • Page 5 Low-Pressure Transfer Pump SER 3396101-1 Overhaul CAUTION Remove the Cylinder with care. Damage to Quad- NOTE: Refer to Figure 2 for component Ring (6) and/or O-Ring (9) can occur. identification on all overhaul procedures. Prior to performing any maintenance procedure, the 7.
  • Page 6 SER 339610-1 Low-Pressure Transfer Pump Pump Body Assembly Valve Body Assembly 1. Install and seat Seal (14) [stem end first], Bearing (15) 24. Unscrew Valve Body (28) from Cylinder (25). [stepped end first], Seal (16) [stem end first], and 25. Remove O-Ring (12) , Stop (26), and Ball (27) from Washer (17) into the bottom of Pump Body (10).
  • Page 7 Low-Pressure Transfer Pump SER 3396101-1 Air Piston CAUTION Use care not to switch Washers (4 and 8). Com- ponent damage can occur. 9. Install Washer (8) [brass color] , O-Ring (7), and Air Piston (5) (observe THIS SIDE UP] onto the Rod.
  • Page 8 SER 339610-1 Low-Pressure Transfer Pump 21. Install the Cylinder over the Body’s O-Ring and seat it 1. Make sure air pressure at the regulator reads zero. properly onto the Bottom Cap. 2. Slowly supply air pressure [recommended minimum of 22. Install the Top Cap onto the Cylinder.
  • Page 9 Low-Pressure Transfer Pump SER 3396101-1 Installation Part Number Description 5604-2 Moisture Separator Additional items that should be incorporated into the 7604-B Regulator and Gauge air piping systems are listed in Table 4. Table 4 Air Line Components Troubleshooting Chart Pump Indications Possible Problems Solution Pump does not cycle...
  • Page 10 SER 339610-1 Low-Pressure Transfer Pump Revision (8-06) 1-800-548-1191 - http://www.partdeal.com - [email protected]...