Siemens SINUMERIK 840D sl Operating Instructions Manual

Siemens SINUMERIK 840D sl Operating Instructions Manual

Hide thumbs Also See for SINUMERIK 840D sl:
Table of Contents
SINUMERIK
SINUMERIK 840D sl/840D
eP-Satellite server
Operating Instructions
Valid for:
eP-Satellite server version 4.7.1.1 SL01
06/2009
Preface
Product information
Requirements for operation
Release management -
eP-Satellite server
Release management -
ePS Reporting Services
Release management -
Updating the eP-Satellite
server
Operation management -
System in operation
Appendix
1
2
3
4
5
6
A
Table of Contents
loading

Summary of Contents for Siemens SINUMERIK 840D sl

  • Page 1 Preface Product information Requirements for operation SINUMERIK Release management - eP-Satellite server SINUMERIK 840D sl/840D Release management - eP-Satellite server ePS Reporting Services Release management - Updating the eP-Satellite server Operating Instructions Operation management - System in operation Appendix Valid for: eP-Satellite server version 4.7.1.1 SL01...
  • Page 2 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.
  • Page 3: Preface

    ● Researching documentation online Information on DOConCD and direct access to the publications in DOConWEB. ● Compiling individual documentation on the basis of Siemens contents with the My Documentation Manager (MDM), refer to http://www.siemens.com/mdm. My Documentation Manager provides you with a range of features for generating your own machine documentation.
  • Page 4 If you have any queries (suggestions, corrections) in relation to this documentation, please fax or e-mail us: +49 (0) 9131 98 2176 E-mail [email protected] A fax form is available at the end of this document. Service & Support If you have any technical questions, please contact our hotline:...
  • Page 5 Preface Note Country-specific telephone numbers for technical support are provided under the following Internet address: http://www.siemens.com/automation/partner SINUMERIK Internet address http://www.siemens.com/sinumerik eP-Satellite server Operating Instructions, 06/2009...
  • Page 6 Preface eP-Satellite server Operating Instructions, 06/2009...
  • Page 7: Table Of Contents

    Table of contents Preface ..............................3 Product information............................ 9 eP-Satellite product overview ......................9 Legal framework ..........................10 Requirements for operation ........................11 Basic configuration: Server systems....................13 2.1.1 Installing the eP-Satellite database server ..................13 2.1.2 Installing the eP-Satellite external web server................16 2.1.3 Installing the eP-Satellite internal web server................16 2.1.4 Installing the eP-Satellite application render server..............17...
  • Page 8 Table of contents Release management - Updating the eP-Satellite server ................ 81 Updating the eP-Satellite ......................81 Installing the eP-Satellite server software................... 83 BC run of version 4.6.x on version 4.7.1..................88 BC run of version 4.7.0 on version 4.7.1..................92 Database logging ........................
  • Page 9: Product Information

    Product information eP-Satellite product overview Overview eP-Satellite is part of the ePS Network Services product portfolio. It is chiefly intended for use by customers who require a high level of data confidentiality and would, therefore, be unwilling to store information in a location outside of their direct sphere of influence. The customer is entirely responsible for the operation of the eP-Satellite product and the server system required for this purpose.
  • Page 10: Legal Framework

    Product information 1.2 Legal framework Legal framework Overview A license agreement between Siemens AG and the user provides the legal framework governing the use of eP-Satellite. eP-Satellite server Operating Instructions, 06/2009...
  • Page 11: Requirements For Operation

    Requirements for operation System overview Currently, at least two physical servers are recommended for operating the eP-Satellite product. Depending on the functions you require, up to six separate server systems may be necessary. The servers used reflect the main eP-Satellite functions and are summarized in the table below.
  • Page 12 Requirements for operation 1.2 Legal framework Server Function Minimum requirements eP-Satellite application Saving and managing MS Windows Server 2003 Enterprise Edition, reporting database information relating to English server reporting MS SQL Server 2005 Enterprise Edition, (optional) English, incl. SP2 .NET Framework 2.0, English eP-Satellite application Preparing and displaying MS Windows Server 2003 Enterprise Edition,...
  • Page 13: Basic Configuration: Server Systems

    Requirements for operation 2.1 Basic configuration: Server systems Basic configuration: Server systems 2.1.1 Installing the eP-Satellite database server Installing the eP-Satellite database server Relevant servers eP-Satellite database server In order to install Microsoft SQL Server 2005, the operating system must be fully set up and configured.
  • Page 14 Requirements for operation 2.1 Basic configuration: Server systems Use the built-in System account Service Account • Local system: SQL Server • SQL Server Agent • SQL Browser • Mixed Mode Authentication Mode • Enter the password from the data sheet •...
  • Page 15 Requirements for operation 2.1 Basic configuration: Server systems Configuring the SQL Server following installation Cross Database Ownership In the SQL Server Management Studio, right-click the database instance, select "Properties", and activate the "Cross database ownership chaining" option under the "Security" menu command. Remote Connections In the SQL Server Management Studio, right-click the database instance, select...
  • Page 16: Installing The Ep-Satellite External Web Server

    Requirements for operation 2.1 Basic configuration: Server systems 2.1.2 Installing the eP-Satellite external web server Relevant servers eP-Satellite External Web Server IIS must be installed on the web servers before the eP-Satellite can be installed. To do this, add the Windows "Application Server" component. ASP.NET will also need to be installed in order to carry out basic installation of the application server.
  • Page 17: Installing The Ep-Satellite Application Render Server

    Requirements for operation 2.1 Basic configuration: Server systems 2.1.4 Installing the eP-Satellite application render server Relevant servers eP-Satellite application render server IIS must be installed on the web servers before the eP-Satellite can be installed. To do this, add the Windows "Application Server" component. ASP.NET will also need to be installed in order to carry out basic installation of the application server.
  • Page 18 Requirements for operation 2.1 Basic configuration: Server systems Procedure Perform the setup procedure as follows: SQL Server Database Services Components to Install • Analysis Services • Notification Services • Integration Services • Workstation components, Books Online • and development tools Default or Named instance Instance Name •...
  • Page 19 Requirements for operation 2.1 Basic configuration: Server systems Mixed Mode Authentication Mode • Enter the "sa" password from the data • sheet under "Enter password". Collation settings Accent-sensitive • Dictionary order, case-insensitive, for • use with 1252 Character Set eP-Satellite server Operating Instructions, 06/2009...
  • Page 20: Installing The Ep-Satellite Application Reporting Web Server

    Requirements for operation 2.1 Basic configuration: Server systems 2.1.6 Installing the eP-Satellite application reporting web server Relevant servers eP-Satellite application reporting web server Installing IIS IIS must be installed on the web servers before the eP-Satellite can be installed. To do this, add the Windows "Application Server"...
  • Page 21 Requirements for operation 2.1 Basic configuration: Server systems Default or Named instance Instance Name • Use the built-in System account Service Account • Local system: SQL Server • Reporting Services • Mixed Mode Authentication Mode • Enter the "sa" password from the data •...
  • Page 22 Requirements for operation 2.1 Basic configuration: Server systems Accent-sensitive Collation Settings • Dictionary order, case-insensitive, for • use with 1252 Character Set Following this, select the default configuration for the report server and deactivate "Error and Usage Report Settings". eP-Satellite server Operating Instructions, 06/2009...
  • Page 23: Change Management - Basic Eps Software And Hardware

    Requirements for operation 2.2 Change management - Basic ePS software and hardware Change management - Basic ePS software and hardware Overview Minimum requirements for the eP-Satellite server HW configuration are redefined at specific intervals. The cycles for releasing the new minimum requirements are determined by ePS & RTS.
  • Page 24: Change Management - Software Updates

    An overview of the patch compatibility is generally given shortly after the release of the security patch on the Service & Support Portal of Siemens Industry Automation and Drive Technologies.
  • Page 25: Security Management - Certificates

    Requirements for operation 2.4 Security management - Certificates Security management - Certificates Internal and external eP-Satellite server: Certificate The HTTPS protocol is used for internal communications between the eP-Satellite server and machine controls. The operator himself is responsible for procurement and installation of the required 128 bit certificates.
  • Page 26: Configuration Example: Server Systems

    Requirements for operation 2.5 Configuration example: Server systems Configuration example: Server systems Scope of functions The tables below show an example of an eP-Satellite system's hardware configuration and full scope of functions. The exact service specifications for the servers mentioned above will depend on how eP- Satellite is to be used (e.g.
  • Page 27 Requirements for operation 2.5 Configuration example: Server systems eP-Satellite application render server Component Number/Type Processor 1 x Intel dual-core, 3 GHz Memory 2 GB RAM HDD memory OS 2 x 73 GB, 10,000 rpm (RAID1) HDD memory log files 2 x 73 GB, 10,000 rpm (RAID1) eP-Satellite application reporting database server Component Number/Type...
  • Page 28: Infrastructure Engineering

    Requirements for operation 2.6 Infrastructure engineering Infrastructure engineering Overview Certain minimum requirements in respect of the IT infrastructure must be met in order to operate the eP-Satellite server. These are outlined below. Internet connection A minimum requirement is that the eP-Satellite web server has an official IP address and can be accessed by ePS Network Services servers via the Internet.
  • Page 29: Implementation Example: It Infrastructure

    Requirements for operation 2.7 Implementation example: IT infrastructure Implementation example: IT infrastructure Communication paths The communication paths used are shown in the graphic below: Communications between: eP-Satellite server and ePS Network Services server K1, K2 Protocol: HTTPS, SOAP over VPN Type: Permanent (mandatory) Purpose:...
  • Page 30 Requirements for operation 2.7 Implementation example: IT infrastructure Communications between: ePS Network Services client (type 1) and eP-Satellite server Protocol: HTTPS, SOAP Type: Permanent Using ePS Network Services Purpose: Specification: WSDL 4 Communications between: ePS Network Services client (type 2) and eP-Satellite server Protocol: HTTPS, SOAP Type:...
  • Page 31: Release Management - Ep-Satellite Server

    Release management - eP-Satellite server Overview The software to be installed comprises the following components: Installation package Name Server installation package server_install_Satellite_x.x.x.x.cab Patches (where applicable) E.g. MHScript_Patchxx_x.x.x.x.cab Language packages server_install_lng_yy_x.x.x.x.cab Render server package RenderServer_x.x.x.x.msi Reporting server package Reporting_install_Satellite_x.x.x.x.cab Genesis server package genesis_x.x.x.x.msi Online help OH_YYY...
  • Page 32: Preparing For Installation

    Release management - eP-Satellite server 3.1 Preparing for installation Preparing for installation Installing the fonts Relevant servers eP-Satellite External Web Server Internal eP-Satellite web server eP-Satellite application reporting web server Before installing the server software, the "Arial Unicode MS" and "MS Song Truetype" fonts must be installed on the relevant servers.
  • Page 33 Release management - eP-Satellite server 3.1 Preparing for installation Configuring the .Net framework (web.config) Relevant servers eP-Satellite External Web Server Internal eP-Satellite web server File web.config can be found in the Windows installation directory under Microsoft.NET (C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\CONFIG). You need to adapt this (in the section) by adding .epdf as a file extension:
  • Page 34 Release management - eP-Satellite server 3.1 Preparing for installation <; >> << NAME=ReportingServerUrl; FILE=*.*; VALUE=localhost/ReportServer; >> << NAME=ReportServiceCommAvailable; FILE=*.*; VALUE=TRUE; >> <<...
  • Page 35: Installing The Ep-Satellite Server Software

    Release management - eP-Satellite server 3.2 Installing the eP-Satellite server software Installing the eP-Satellite server software Installing the database Relevant servers eP-Satellite database server Unzip the "Server_Install_Satellite_x.x.x.x.zip" archive. The installation package must be located no more than one level below the drive letter; otherwise, installation problems relating to the depth of the directory will arise.
  • Page 36 Release management - eP-Satellite server 3.2 Installing the eP-Satellite server software Unzip the "Server_Install_Satellite_x.x.x.x.zip" archive. The installation package must be located no more than one level below the drive letter; otherwise, installation problems relating to the depth of the directory will arise. It must be ensured that none of the extracted files including subfolders has read-only access.
  • Page 37 Release management - eP-Satellite server 3.2 Installing the eP-Satellite server software Installing Genesis V2 Run installation package "genesis_x.x.x.x.msi". Installation path %Installpath%\ePS_Services\AppServer_V4\Genesis_V2 Logging directory %Logpath%\ePS_Services\AppServer_V4\Genesis_V2\Log_Genensis Edit the following entry in the %Installpath%\ePS_Services\AppServer_V4\Genesis_V2\UAT\ folder of file GenesisProcessingUnit.exe.config: Line: %Logpath%\ePS_Services\AppServer_V4\Genesis_V2\Log_Genesis Replace with: ...
  • Page 38 Release management - eP-Satellite server 3.2 Installing the eP-Satellite server software Patch 05 – Installing Business Converter Patch Note Requirement At least version V04.07.01.00 SL06 (build 4.7.1.17) must be installed. Replace the files ePS.Business.Converter.exe and ePS.Business.Converter.pdb from the extracted installation package under \build\output\server\utils\release\bin with the files in the patch.
  • Page 39 Release management - eP-Satellite server 3.2 Installing the eP-Satellite server software This requires an xml file to be generated and transferred to the database using the ePS.Business.CreateDpg.exe tool: Datenschutzdatei.xml
  • Page 40 Release management - eP-Satellite server 3.2 Installing the eP-Satellite server software For all other languages: Create directory %Installpath%\ePS_Services\Services\Version4\Help\PC\xx Unzip archive OH_YYY.zip and copy the contents to the directory created (shown above). "HelpIndex.yy-yy.xml" %Installpath%\ePS_Services\Services\Version4\PC\Common\Help\ Edit HelpIndex.xml. Replace "dummy.htm" with: https://%Webservices- URL%/Webservices/Version4/Help/PC/yy/OnlineHilfe.htm Save the file as "HelpIndex.yy-yy.xml".
  • Page 41: Configuring The Internal Ep-Satellite Web Server

    Release management - eP-Satellite server 3.3 Configuring the internal eP-Satellite web server Configuring the internal eP-Satellite web server Relevant servers Internal eP-Satellite web server Web service extension In IIS 6, the ASP.Net 2.0 extension must be explicitly activated. Under "Add new Web service extension"...
  • Page 42 Release management - eP-Satellite server 3.3 Configuring the internal eP-Satellite web server Creating the Services virtual directory In the Internet Information Services (IIS) Manager, under the default website you now need to create the new virtual directory with the name "Services", the path "Path: %Installpath%\ePS_Services\Services\Version4"...
  • Page 43 Release management - eP-Satellite server 3.3 Configuring the internal eP-Satellite web server A directory located on this computer /Services/MHC • Local Path: • %Installpath%\ePS_Services\Services\Version 4\MHCProxy Read, Log Visits • Application Name MHC • Execute permissions: Scripts only • Application pool: .NET 2.0 MHComm •...
  • Page 44 Release management - eP-Satellite server 3.3 Configuring the internal eP-Satellite web server A directory located on this computer /Services/SatelliteComm • Local Path: • %Installpath%\ePS_Services\Services\Version 4\PPortal Read, Log Visits • Application Name SatelliteComm • Execute permissions: Scripts only • Application pool: .NET 2.0 •...
  • Page 45 Release management - eP-Satellite server 3.3 Configuring the internal eP-Satellite web server The designated directory /WebServices/Version4/BA • Read, Log Visits • Application Name BA • Execute permissions: Scripts only • Application pool: .NET 2.0 • Integrated Windows authentication • Activate SSL (incl. 128 bits) •...
  • Page 46 Release management - eP-Satellite server 3.3 Configuring the internal eP-Satellite web server A directory located on this computer /Webservices/Version4/MHC • Local Path: • %Installpath%\ePS_Services\Services\Version 4\MHComm Read, Log Visits • Application Name MHC • Execute permissions: Scripts only • Application pool: .NET 2.0 MHComm •...
  • Page 47 Release management - eP-Satellite server 3.3 Configuring the internal eP-Satellite web server The designated directory /Webservices/Version4/SystemServiceComm • Read, Log Visits • Application Name SystemServiceComm • Execute permissions: Scripts only • Application pool: .NET 2.0 • SystemServiceComm Activate anonymous access • Denied Access, granted 127.0.0.1 •...
  • Page 48: Configuring The External Ep-Satellite Web Server

    Release management - eP-Satellite server 3.4 Configuring the external eP-Satellite web server Configuring the external eP-Satellite web server Relevant servers eP-Satellite External Web Server Web service extension In IIS 6, the ASP.Net 2.0 extension must be explicitly activated. Under "Add new Web service extension"...
  • Page 49 Release management - eP-Satellite server 3.4 Configuring the external eP-Satellite web server Then make the following configuration changes at this directory: Redirect to: https://URL/Services/PC Services • Application pool: .NET 2.0 • Activate anonymous access • Activate SSL (incl. 128 bits) •...
  • Page 50 Release management - eP-Satellite server 3.4 Configuring the external eP-Satellite web server A directory located on this computer /Webservices/ • Local Path: • %Installpath%\ePS_Services\Services Read, Log Visits • Application Name Webservices • Execute permissions: Scripts only • Application pool: .NET 2.0 •...
  • Page 51 Release management - eP-Satellite server 3.4 Configuring the external eP-Satellite web server Configuring the SMTP service If the web server is also used for sending e-mails, the default SMTP virtual server for IIS must be configured in the Internet Information Services (IIS) Manager. The most important settings for the SMTP virtual server are: IP Address: All unassigned General...
  • Page 52 Release management - eP-Satellite server 3.4 Configuring the external eP-Satellite web server Coding the password Under \build\output\server\production\release\bin in the unzipped package, call file ePS.Infrastructure.EncoderNT.exe as follows: ePS.Infrastructure.EncoderNT.exe "%HASH Password%" Copy the result to the central web.config file under %Installpath%\ePS_Services\Services\Version4 in the Version Management area. web.config serverUserName="server2server"...
  • Page 53: Database Logging

    Release management - eP-Satellite server 3.5 Database logging Database logging Installing the logging service Relevant servers eP-Satellite database server You will find the files for the service in the unzipped installation package of the web server, under: build\output\server\production\release\bin The following files must be copied to folder %Installpath%\ePS_services\DBLogging Figure 3-2 List of files Using the prompt, switch to the installation directory and execute the following command:...
  • Page 54 Release management - eP-Satellite server 3.5 Database logging Starting the service The service is started from the Services panel. The Startup Type setting for the service must be changed to "Automatic". Figure 3-3 Services Setting up the "MessageQueue" Windows component Installing MessageQueue: Relevant servers eP-Satellite External Web Server...
  • Page 55 Release management - eP-Satellite server 3.5 Database logging MessageQueue is subsequently installed under Add or Remove Programs, in the Windows Components area under Application Server. Figure 3-4 Message Queuing Creating MessageQueue logging Relevant servers eP-Satellite database server In the Computer Management console, create a new private MessageQueue called "logentryqueue".
  • Page 56 Release management - eP-Satellite server 3.5 Database logging Figure 3-5 Computer Management eP-Satellite server Operating Instructions, 06/2009...
  • Page 57 Release management - eP-Satellite server 3.5 Database logging The queue security must be adapted so that the user of the logging service has permission to write to the queue. For example: Figure 3-6 Properties Activating database logging Relevant servers eP-Satellite External Web Server Internal eP-Satellite web server In order to activate database logging, the names of the database server and the private MessageQueue must be adapted in the web.config files of the web server and render server.
  • Page 58 Release management - eP-Satellite server 3.5 Database logging The entry can be found in the web.config file in the wcfTarget section and must be adapted as follows: ( ...
  • Page 59: First Commissioning Of The Ep-Satellite And Testing Of Its Functions

    Release management - eP-Satellite server 3.6 First commissioning of the eP-Satellite and testing of its functions First commissioning of the eP-Satellite and testing of its functions Configuration To enable you to check the installations and carry out any other configurations, users and organizations will now need to be created on the system.
  • Page 60 Release management - eP-Satellite server 3.6 First commissioning of the eP-Satellite and testing of its functions Create an organization This is where all the data relating to the organization and its administrator is entered. Immediately after the organization has been created, a password generated for the administrator is displayed.
  • Page 61 Release management - eP-Satellite server 3.6 First commissioning of the eP-Satellite and testing of its functions Once you have successfully logged in, the password must be changed and the terms of the privacy policy accepted. You will then see the following screen: A new user is created under the menu command "Administration"...
  • Page 62 Release management - eP-Satellite server 3.6 First commissioning of the eP-Satellite and testing of its functions This user will now be able to work in the PC portal. Once they have successfully logged in, their password must be changed again and the terms of the privacy policy accepted. eP-Satellite server Operating Instructions, 06/2009...
  • Page 63: Configuring The Connection

    Release management - eP-Satellite server 3.7 Configuring the connection Configuring the connection Communications link Relevant servers eP-Satellite External Web Server It must be possible for https communication to take place between the eP-Satellite web server and the ePS Network Services ASP server in both directions. For this purpose, both directions of communication require certificates, which are used in order to authenticate both the server and the client.
  • Page 64 Release management - eP-Satellite server 3.7 Configuring the connection Parameter Entry Outgoing authentication Method Certificate (what the satellite sends to the Certificate Select own official certificate ASP server) (check information on selected certificate) The settings under "Data layer" and "Transport layer" are identical. It is also possible to activate the operating interface on the eP-Satellite.
  • Page 65: Installing Render Services

    Release management - eP-Satellite server 3.8 Installing Render Services Installing Render Services Precondition ePS Render Services only needs to be installed if you are using solution line clients. Installing ePS Render Services Relevant servers eP-Satellite application render server First stop the IIS web server service, then run file RenderServer_x.x.x.x.msi and carry out the installation procedure as described below.
  • Page 66 Release management - eP-Satellite server 3.8 Installing Render Services The user created during the setup routine then needs to be assigned the following authorizations: Authorizations Access method C:\Windows\temp directory Read Registry entry: Full control HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog Adapting the web.config file In directory %Installpath%\ePS_Services\Services\RenderServer, edit the web.config file and add the colored entries.
  • Page 67 Release management - eP-Satellite server 3.8 Installing Render Services Figure 3-11 Internet Options The %HMI-URL% is then added as a trusted site. eP-Satellite server Operating Instructions, 06/2009...
  • Page 68 Release management - eP-Satellite server 3.8 Installing Render Services eP-Satellite server Operating Instructions, 06/2009...
  • Page 69: Release Management - Eps Reporting Services

    Release management - ePS Reporting Services Introduction Overview ePS Reporting Services is an optional service used to generate customized reports. It is installed on separate systems (a web server and a database server) and is an extension of Microsoft SQL Reporting Services. The installation instructions refer to this type of two-server configuration;...
  • Page 70: Configuring Microsoft Reporting Services

    Release management - ePS Reporting Services 4.2 Configuring Microsoft Reporting Services Configuring Microsoft Reporting Services Basic configuration of the eP-Satellite application reporting web server Relevant servers eP-Satellite application reporting web server Following successful installation, the report server will need to be configured. To do this, open the Reporting Services Configuration Manager from Programs\Microsoft SQL Server 2005/Configuration Tools.
  • Page 71 Release management - ePS Reporting Services 4.2 Configuring Microsoft Reporting Services Here, please enter the relevant parameters from the installation insert. Server Name %ReportingDatabase/(ReportingInstance)% Database Name ReportServer Confirm the window with "OK" and then accept the changes with "Apply". Authorizations for the databases Relevant servers eP-Satellite application reporting database server In the SQL Server Management Studio, connect to the relevant...
  • Page 72 Release management - ePS Reporting Services 4.2 Configuring Microsoft Reporting Services The image below shows the completed settings: Figure 4-3 Login Changing the credentials for connection Relevant servers eP-Satellite application reporting web server Change the values for the user you have just created under "Database Connection" to the following: Credentials Type SQL Server Credentials...
  • Page 73 Release management - ePS Reporting Services 4.2 Configuring Microsoft Reporting Services Create the user as follows: First Name ePS Reporting Last Name WebUser Full Name ePSReporting WebUser User Logon Name ePSReportingWebUser@%Domain% User Logon Name (pre-Windows 2000) ePSReportingWebUser Password ePSReportingWebUserPassword User cannont change password Activated Password never expires Activated...
  • Page 74 Release management - ePS Reporting Services 4.2 Configuring Microsoft Reporting Services Under "User Mappings", assign the following authorizations to this user again: User Mapping ReportServer Public,RSExecRole (ePSRepSQLServiceUser) ReportServer TempDB Public,RSExecRole Figure 4-6 Login Authorizations in the SQL Server Reporting Web Services Relevant servers eP-Satellite application reporting web server Call the URL https://localhost/reports in the browser window on the web server and switch to...
  • Page 75 Release management - ePS Reporting Services 4.2 Configuring Microsoft Reporting Services Figure 4-7 Role assignment To check these settings, call the URL https://localhost/Reportserver in the browser window. If the website is displayed without problems, Reporting Services has been configured correctly. Authorizations for the web server Relevant servers eP-Satellite application reporting web server...
  • Page 76: Installing Eps Reporting Services

    Release management - ePS Reporting Services 4.3 Installing ePS Reporting Services Installing ePS Reporting Services Installing the database component Relevant servers eP-Satellite application reporting database server The satellite.settings file created in Section Preparing for installation (Page 32) is used for installing ePS Reporting Services.
  • Page 77 Release management - ePS Reporting Services 4.3 Installing ePS Reporting Services Checking the reports delivery service Checking reports To check whether the reports delivery service is working, the reports which are available can be viewed via the SQL Server Reporting Services web interface. To do this, open the URL https://localhost/reports in the browser on the reporting web server.
  • Page 78: Final Steps

    Release management - ePS Reporting Services 4.4 Final steps Final steps 4.4.1 Settings in the virtual directories Final steps Relevant servers eP-Satellite application reporting web server The final steps now involve making the following settings in the respective virtual directories. /ePSReportingServiceComm A directory located on this computer Local Path: C:\eps-services\EpsReportingServiceComm...
  • Page 79: Testing The Eps Reporting Services Installation

    Release management - ePS Reporting Services 4.4 Final steps 4.4.2 Testing the ePS Reporting Services installation In order to perform a final function test, ePS Reporting Services is accessed from the product: ● This is demonstrated using the Business Administration portal in the images below: Figure 4-9 Managing reports Figure 4-10...
  • Page 80 Release management - ePS Reporting Services 4.4 Final steps ● Additionally, ePS Network Services is tested via the user interface on the PC: Figure 4-11 ePS client reports Figure 4-12 Report configuration eP-Satellite server Operating Instructions, 06/2009...
  • Page 81: Release Management - Updating The Ep-Satellite Server

    Release management - Updating the eP-Satellite server Updating the eP-Satellite Overview This section describes how to update the eP-Satellite from Version 4.6 to Version 4.7. Relevant servers: eP-Satellite External Web Server Internal eP-Satellite web server eP-Satellite reporting web server eP-Satellite application reporting database server Adapting the settings file The settings file contains all the settings required for installation.
  • Page 82 Release management - Updating the eP-Satellite server 5.1 Updating the eP-Satellite Server\%MSSQL.2%\Reporting Services\ReportServer\bin;>> << NAME=vsReportingBinDir; FILE=*.*; VALUE=C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies;>> << NAME=AcrobatReaderPath; FILE=*.*; VALUE=C:\Program Files\ Adobe\Reader 8.0\Reader\AcroRd32.exe; >> <
  • Page 83: Installing The Ep-Satellite Server Software

    Release management - Updating the eP-Satellite server 5.2 Installing the eP-Satellite server software Installing the eP-Satellite server software Installing the database Relevant servers eP-Satellite application database server Extracting archive "Server_ Install_ Satellite _x.x.x.x.zip": The installation package must be located no more than one level below the drive letter; otherwise, installation problems relating to the depth of the directory will arise.
  • Page 84 Release management - Updating the eP-Satellite server 5.2 Installing the eP-Satellite server software Unzip the "Server_Install_Satellite_x.x.x.x.zip" archive. The installation package must be located no more than one level below the drive letter; otherwise, installation problems relating to the depth of the directory will arise. It must be ensured that none of the extracted files including subfolders has read-only access.
  • Page 85 Release management - Updating the eP-Satellite server 5.2 Installing the eP-Satellite server software Edit the following entry in the %Installpath%\ePS_Services\AppServer_V4\Genesis_V2\UAT\ folder of file GenesisProcessingUnit.exe.config: Line: %Logpath%\ePS_Services\AppServer_V4\Genesis_V2\Log_Genesis Replace with: %Logpath%\ePS_Services\AppServer_V4\Genesis_V2\Log_UAT\ Now restart the "ePS Genesis 2 PU" service. Installing online help German: Create directory...
  • Page 86 Release management - Updating the eP-Satellite server 5.2 Installing the eP-Satellite server software Patch 01 - Installing IHAJOB_AutoStartFlag_Datenkorrektur Note Requirement At least DB version V04.06.00.00 SL21 must be installed. Connect on database server via SQL Server Management Studio with the corresponding instance.
  • Page 87 Release management - Updating the eP-Satellite server 5.2 Installing the eP-Satellite server software Patch 06 – Installing DLL Patch Note Requirement At least version V04.07.01.00 SL06 (build 4.7.1.17) must be installed. Procedure: 1. Extract the package to the following directory: %Installpath%\ePS_Services\Services\Version4\PC\bin\ 2.
  • Page 88: Bc Run Of Version 4.6.X On Version 4.7.1

    Release management - Updating the eP-Satellite server 5.3 BC run of version 4.6.x on version 4.7.1 BC run of version 4.6.x on version 4.7.1 Using the Business Converter Relevant servers Internal eP-Satellite web server The Business Converter must be run following a version update. It converts the data that is present to a format suitable for the updated database version.
  • Page 89 Release management - Updating the eP-Satellite server 5.3 BC run of version 4.6.x on version 4.7.1 Switching IIS offline You must also ensure that the system cannot be accessed by external parties while the Business Converter is running offline. To do this, first create a backup of the settings in the IIS Manager.
  • Page 90 Release management - Updating the eP-Satellite server 5.3 BC run of version 4.6.x on version 4.7.1 Business Converter: Starting online It is then possible for the system to go online, as the changes below can be made during operation. Command line: ePS.Business.Converter.exe /ALLONLINE /WebDir:"%InstallPath%\eps_services\services\Version4\ba"...
  • Page 91 Release management - Updating the eP-Satellite server 5.3 BC run of version 4.6.x on version 4.7.1 While the BC is running, the following entry can be used to reactivate the old display for the NC monitors: Command line: ...
  • Page 92: Bc Run Of Version 4.7.0 On Version 4.7.1

    Release management - Updating the eP-Satellite server 5.4 BC run of version 4.7.0 on version 4.7.1 BC run of version 4.7.0 on version 4.7.1 Using the Business Converter Relevant servers Internal eP-Satellite web server The Business Converter must be run following a version update. It converts the data that is present to a format suitable for the updated database version.
  • Page 93 Release management - Updating the eP-Satellite server 5.4 BC run of version 4.7.0 on version 4.7.1 Switching IIS offline You must also ensure that the system cannot be accessed by external parties while the Business Converter is running offline. To do this, first create a backup of the settings in the IIS Manager.
  • Page 94 Release management - Updating the eP-Satellite server 5.4 BC run of version 4.7.0 on version 4.7.1 Business Converter: Starting online It is then possible for the system to go online, as the changes below can be made during operation. Command line: ePS.Business.Converter.exe /MAINTENANCETICKETTEMPLATETRANSIENTTICKETS /CONVERTNCVALUESTOVARIABLEMONITOR /WebDir:"c:\eps_services\Services\Version4\ba"...
  • Page 95 Release management - Updating the eP-Satellite server 5.4 BC run of version 4.7.0 on version 4.7.1 Once the online Business Converter has finished, you can move on to the next installation step. Locking organizations Since the Business Converter call "/ALLOFFLINE" temporarily unlocks all locked organizations, these organizations need to be locked again.
  • Page 96: Database Logging

    Release management - Updating the eP-Satellite server 5.5 Database logging Database logging Uninstalling the current service Relevant servers eP-Satellite database server The service that is already installed can be uninstalled using the following call in the prompt: C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\InstallUtil.exe /u ePS.Infrastructure.Logging.WindowsService.exe Installing logging services The files for the service are located in the unzipped installation package of the web server, under build\output\server\production\release\bin.
  • Page 97 Release management - Updating the eP-Satellite server 5.5 Database logging Starting the service The service is started from the Services panel. The Startup Type setting for the service must be changed to "Automatic". Figure 5-3 Services Activating database logging Relevant servers: eP-Satellite External Web Server Internal eP-Satellite web server eP-Satellite application render server...
  • Page 98 Release management - Updating the eP-Satellite server 5.5 Database logging The entry can be found in the web.config file in the wcfTarget section and must be adapted as follows: ( ...
  • Page 99: Eps Render Services

    Release management - Updating the eP-Satellite server 5.6 ePS Render Services ePS Render Services Relevant servers eP-Satellite application render server Note ePS Render Services only needs to be installed if you are using solution line clients. Installing ePS Render Services First stop the IIS web server service, then uninstall the previously installed Render Services version.
  • Page 100 Release management - Updating the eP-Satellite server 5.6 ePS Render Services Adapting the web.config file In directory %Installpath%\ePS_Services\Services\RenderServer, edit the web.config file and add the colored entries.
  • Page 101: Reporting Services

    Release management - Updating the eP-Satellite server 5.7 Reporting Services Reporting Services 5.7.1 Installing ePS Reporting Services Installing the database component Relevant servers eP-Satellite application reporting database server The satellite.settings file created in Section Preparing for installation (Page 32) is used for installing ePS Reporting Services.
  • Page 102 Release management - Updating the eP-Satellite server 5.7 Reporting Services Install DatabaseServer for ePS Reporting Install Web Server for ePS Reporting Checking the reports delivery service To check whether the reports delivery service is working, the reports which are available can be viewed via the SQL Server Reporting Services web interface.
  • Page 103: Testing The Eps Reporting Services Installation

    Release management - Updating the eP-Satellite server 5.7 Reporting Services 5.7.2 Testing the ePS Reporting Services installation In order to perform a final function test, ePS Reporting Services is accessed from the product: ● This is demonstrated using the Business Administration portal in the images below: Figure 5-6 Managing reports Figure 5-7...
  • Page 104 Release management - Updating the eP-Satellite server 5.7 Reporting Services ● Additionally, ePS Network Services is tested via the user interface on the PC: Figure 5-8 ePS client reports Figure 5-9 Report configuration eP-Satellite server Operating Instructions, 06/2009...
  • Page 105: Operation Management - System In Operation

    Operation management - System in operation Business Administration Using Business Administration Business Administration is used to set parameters for a secure connection between the ePS Network Services server and the eP-Satellite server. Business Administration is available on both the ePS Network Services server and the eP-Satellite server. Business Administration provides the following services: ●...
  • Page 106: Business Administration Functions

    Operation management - System in operation 6.2 Business Administration functions Business Administration functions Manage organizations Under "Manage organizations", you can create new organizations or change and update the data for the organizations that are already listed: Figure 6-2 List of organizations The following information is provided for each organization in the list: Name/Icon Display...
  • Page 107 Operation management - System in operation 6.2 Business Administration functions For each organization, the address and contact details of the organization administrator are entered and saved: Figure 6-3 Organization details Service Request Monitor The Service Request Monitor is a display function that may also be used for diagnostic purposes.
  • Page 108 Operation management - System in operation 6.2 Business Administration functions Synchronization In order to test the connection, the option "Operating interface active" must be selected. The "Sync test" button, which is used to test the connection between the eP-Satellite server and ePS Network Services server, is present on the ePS Network Services server, but not on the eP-Satellite server.
  • Page 109 Operation management - System in operation 6.2 Business Administration functions Manage reporting settings Eight different report forms are available on the eP-Satellite server. ● Some reports can be saved as PDF files for documentation purposes. ● A report form can only be viewed by and is only made available to an organization if it has been entered under "Enabled organizations".
  • Page 110: Exporting/Importing A Machine Configuration

    Operation management - System in operation 6.3 Exporting/Importing a machine configuration Exporting/Importing a machine configuration Overview Machine configuration data is always exported to the ePS Network Services server, and is always imported from the ePS Network Services server. Example: Exporting/Importing a machine If a machine tool is moved from one location to another, for example, the administration and configuration data for the machine will also need to be adapted to the new environment.
  • Page 111 Operation management - System in operation 6.3 Exporting/Importing a machine configuration Figure 6-8 Exporting the configuration data Importing the machine's configuration data Following the import to the eP-Satellite server: Figure 6-9 Importing the configuration data eP-Satellite server Operating Instructions, 06/2009...
  • Page 112 Operation management - System in operation 6.3 Exporting/Importing a machine configuration eP-Satellite server Operating Instructions, 06/2009...
  • Page 113: Appendix

    Appendix Abbreviations Admin Administrator (user role) Application Service Providing Computerized Numerical Control: Computerized numerical control Event History File Transfer Protocol FQDN Full Qualified Domain Name Global Assembly Cache Equability axis test Hard Disk Drive Human Machine Interface Commissioning engineer (user role) Circularity test Maintenance Ticket Machine Operator (user role)
  • Page 114: Feedback On The Documentation

    This document will be continuously improved with regard to its quality and ease of use. Please help us with this task by sending your comments and suggestions for improvement via e-mail or fax to: E-mail: mailto:[email protected] Fax: +49 9131 - 98 2176 Please use the fax form on the back of this page.
  • Page 115 Appendix A.2 Feedback on the documentation eP-Satellite server Operating Instructions, 06/2009...
  • Page 116 Appendix A.2 Feedback on the documentation eP-Satellite server Operating Instructions, 06/2009...
  • Page 117: Index

    Index Application pools, 41 Reports, 109 Application server, 11 Revocation list, 64 Business Administration, 105 SMTP, 51 Business Converter, 89, 93 System overview, 11 Communication paths, 29 Web server, 12 Communications link, 105 web.config, 57 Credentials, 72 Database logging, 57 Database server, 11 Domain account, 72 ePS Render Services, 65...
  • Page 118 Index eP-Satellite server Operating Instructions, 06/2009...

This manual is also suitable for:

Sinumerik 840dep

Table of Contents