Page 1: Table Of Contents
content Chapter 1 Product Description ...........1 Section 2 Product Appearance Introduction ....1 Section 3 speaker (bee buzzer) sound ......2 Section 4 Product paramete ..........3 Chapter 2 The Product Installation ..........5 YooSee APP Download Installation ........5 YooSee APP ID Registered（Initial Use） . ..6 Section 2 Section 3 YooSee APP Log In（Finished Registering）9 ...
Page 2 Instructions ................24 Section 4 Yoosee APP System Settings Interface Instructions ................25 Chapter 4 Camera Basic Features ........26 Section 2 Device Information ........26 Section 3 Time Settings ...........27 Section 4 Media Settings ..........28 Section 5 Security Settings ..........29 ....................29 Section 6 Network Settings ..........29 Section 7 Alarm Settings ...........30 Section 8 Recording Settings ...
Page 3 Section 7 Quited ...............38 Chapter6 FAQ ................38 3 ...
Page 4: Chapter 1 Product Description
Chapter 1 Product Description Section 1 Packing List: Device *1 Instructions*1 adapter*1 Stent and install Accessories bag*1 Section 2 Product Appearance Introduction 1：High - sensitivity resistor 2：HD Camera Shot； 3：Infrared night vision lights； 4：microphone（Built-in）； 5：WIFI Aerial； 6：speaker（Built-in）； 7：Power port； 8：Reset；...
Page 5: Section 3 Speaker (Bee Buzzer) Sound
Section 3 speaker (bee buzzer) sound camera speaker(bee buzzer)sound stutas definition: waiting to connect when device works(network not connect) Voice promptsthat connecting and waiting (nework connecting successfully ) Voice prompts:connecting successfully(WIFI connection successfully) Voice prompts:reset successfully(reset successfully) sirens (motion detection alarm ) Voice prompts: set defense successfully(defense setting) Voice prompts: Withdraw defence...
Page 6: Section 4 Productparamete
Section 4 Productparamete Type 1/4" Color CMOS Sensor Primary: Picture Sensor Tesolution 720P/960P/1080P; Minor: 640 x 360 (12fps); Focal F: 3.6MM Lens Type GLASS LENS Perspective 65 Degrees Input Bulit-in microphone Output Bulit-in speaker Audio Audio codec g.711alaw format Compressed H.264 image format Primary:720P/960P/1080P...
Page 7 Sport (Max Micro SDcard Storage 32GB) Supported TCP/IP,DHCP,DDNS,PPP Protocols OE,UPNP,RTSP,ONVIF WIFI IEEE 802.11b/g/n WIFIF Communication 50M (Open Area) Distance Wireless WEP & WPA WPA2 Security Encryption Protocol Level：355 Cradle head Degreesvertical：120 Degrees Others LEDInfrared Light, Night LED Light Vision Function :10M Push Notifications、Alarm Alarm Output Video、Sending email...
Page 8: Chapter 2 The Product Installation
apter 2 Th e Product I nstallation YooS See APP Dow wnload Install lation Meth hod 1：Scan th he QR code on the retail box to install fiphone （Apple， iOS） mobile ， ple APP:“ “YOOSEE APP”I ease scan： If A Android system m mobile，please s scan：...
Page 9: Yoosee App Id Registered（Initial Use
follow the prompts, and your mobile desktop will show “YOOSEE”APP, pease check :icon on right Method 2：Hit the link and install “Y00SEE”APP： www.yoosee.com please choose the right software version follow your mobile system ,and open the link to download the app then finish installing,your mobile will show “YOOSEE”APP,pease check: icon on right Section 2...
Page 10 Register by the email or mobile number and set the password 7 ...
Page 11 Import the right email or mobile number message on the Registration a.mobile registered ：Enter the Verification Code from the mobile that registered and also enter the default password b. email registered：Enter the email address and the default password 8 ...
Page 12 Default Login as finished registering and turn into Yoosee App，Like This Note： Please remember ID and password well Section 3 YooSee APP Log In （Finished Registering） Hit the mobile App Icon(YOOSEE） Enter the login interface ,Enter the ID and password and log in Login successfully 9 ...
Page 13 10 ...
Page 14: Section 4 Proudcts Launch
Section 4 Proudcts Launch Contact with camera. Confirm the wifi signal of mobile well ,then contact the camera with power waiting the Motor of camera self-test (the camera lens will rotate) until head the sound:waiting to connect Section 5 How To contact Products of First Time To Use Or Reset With YooSee App 11 ...
Page 15 Please Control bellow if finished setting the network contacting step: products and the Yoose APP connection Precautions:  the moibile and the camera need contact with the same WIFI setting  Wifi router must not be set the security strategy that limited the drive to visit ...
Page 16 Hit“+“and choose intelligent connection According toprompt，add the new device.hit next step 13 ...
Page 17 now the interface poping up the wifi that need to contact with camera on the mobile ,and enter the wifi password hit next step ,and waitingto connectnetwork when you head that:" itis connecting now ,please waiting " in 3 second , it will pop up the ID interface and connection succeeded 14 ...
Page 18 Way 2：Contact the network by cable and turn to WIFI please contact the camera with the router(not model) by network cable and open the Monitoring software :YOOSEE , then hit " Manually add" Upper right corner after WIFI contacted with mobile well 15 ...
Page 19 Enter ID , device e name and pass sword ,then hit sa (Note :devicename:any yname you like , original passwo rd:123) as finished last s step ,hit "device s settings(Gear icon)"-hit"Networ rk settings"- hit" y your wifi name as s the WIFI List show"- hit"co onfirm "or"chang e"-enter passwo...
Page 20 install the camera where you want to install (note: dont out of range of wifi ) Special declaration: thers must not be any special character on the WIFI , and it must be not out of MAC address limited in router 17 ...
Page 21 Step 2 setting password in the device It will pop up the interface that enter the original password:"123",and set the new password after login in successfully through above 2 ways Please enter password that you like and save in the password box of the interface created (note:remember...
Page 22 it will turn to interface of device list automatically as finished setting Note:  must head the sound:"waiting to connect" from camera before want to connect with network  Please reset if wrong password or contection unsuccessful. Way: hit the reset key behind the camera for 5 seconds by the Sharp objects until hear the sound:"reset successfully", and connect with the network again...
Page 23: Section 6 How To Product Of Contact Password Set With
Section 6 How To Product Of Contact Password Set With YooSee APP Hit“+“and choose " Manually add" Enter the contacted device name,ID and password ,then save. 20 ...
Page 24: Chapter 3 Product Features
Chapter 3 Product Features below is :Specific operations and Function Description Section 1 YooSee APP Main Interface Button it will show interface below as hit device name: 21 ...
Page 25 Add button :add camera Remote monitoring:join Remote monitoring when hit Device status:prompt be online or not Defencestatus:Only receiving the alarm report if set up defences.Alarm if lock , cancel alarm if unlock ,please check :Section 6 Security Settings Replay button:reply video features Setting button:set the device menu Edit button:edit camera name and password device button: to view the device list,it will show all...
Page 26: Section 2 Camera Setting Main Interface Button
Section 2 Camera setting Main Interface Button Introduction 1.time settings : set time 2. Media settings: change Video mode, change sound volume ,and set image reversing 3. Security Settings:set the device admin password and guest password 4. Network settings:view all the network message of all the camera connected 5.
Page 27: Section 3 Camera Real-Time Viewing Interface
Section 3 Camera Real-time Viewing Interface Instructions 1：Show the device time message 2：Show quantity of viewing people 3：Resolution switching button(HD/SD/Smooth) 4：Defense button 5：Monitor function button 6：Intercom function (only intercom if Press and hold ;gun type camera can not support) 7 :Photograph function button 8：Close button and exit interface 9：Slide the screen up and down, and could control the camera to rotate UDLR position...
Page 28: Yoosee App System Settings Interface
Section 4 Yoosee APP System Settings Interface Instructions Account information: check Yoosee APP software account number and login account message System stettings: set the scene models Version update:check the current newest software version system notice:about the Yoosee software notice about: the Introduction of Yoosee software scan QR code and add device...
Page 29: Chapter 4 Camera Basic Features
Chapter 4 Camera Basic Features Section 1 Real-Time Viewing Monitoring hit "Remote monitoring"button of camera show being online in device main interface, then could view the real-time image NOTE: if want to check the same device Viewing Monitoring use 2 mobiles, these 2 mobiles must use different Yoose ID to login Section 2 Device Information show the current device...
Page 30: Section 3 Time Settings
Section 3 Time Settings change device time, hit below "apply"and ok ! and it will show the time upper left corner when view the real-Time Viewing Monitoring after finished time setting change the device Time zone, please choose the local time zone ,and hit "apply"...
Page 31: Section 4 Media Settings
Section 4 Media Settings change video models:PAL model and NTSC model change the sound volume image reversed: hit the image reversed switch to ensure view image normal normal by mobiles 28 ...
Page 32: Section 5 Security Settings
Section 5 Security Settings change the admin password and guest password Admin password: all the permissions Guest password:Real-time viewing permissions Section 6 Network Settings network models:wire model and wireless model wire model: plus and connect with the network 29 ...
Page 33: Section 7 Alarm Settings
cable and ok wireless network list:showwifi message Nearby Section 7 Alarm Settings 1. Alarm report received:hit the switch button ,and open if show blue ,default closed 2. The account number that alarm report push :view Yoosee APP account number that alarm report push (note: not login account number);...
Page 34: Section 8 Recording Settings
successfully. Motion Detection：hit the switch button，and open if show blue ,default closed， the camera can capture moving objects when open status Bee buzzer(Speaker)： the device can not support bee buzzer。 note：Just received alarm report only open the motion detection and the switch of alarm report received at the same time and the defences key is locked Section 8 Recording Settings...
Page 35 slot in the camera ,please check the picture: NOTE:  Need format the card if first time to use. make sure the TF card is Fat 32 format system,allocation unit:16KB  Supoort max capacity is 32GB , it will store 200MB/hours when device works, the video on the tf card will be covered cyclically if the TF store in full capacity and not copied out...
Page 36 2) Alarm recording when set the alarm recording status, need to ensure the the moving port is on the status of alarm report received :open the motion detection and the switch of alarm report received at the same time and the defences key is locked a、...
Page 37: Section 9 Dfense Zone Settings
Defense Zone settings Defense Zone setting could connect with other Smart home accessories,forexample:doormagnet,Human body infrared sensor ,Smoke detector etc but this model of Haier camera can not support the function,please waiting for the new models that support these functions 34 ...
Page 38: Section 10 Storage Settings
Section 10 Storage Settings view mini sd card (TF)card capacity, and the Remaining capacity,also can format TF card Note: need format the card if first time to use. make sure the TF card is Fat 32 format system,allocation unit:16KB Section 11 Device Updates Checking hit device checking update,view the current software version update in time...
Page 39: Section 1 Idimforation
enter system setting function interface Section 1 IDImforation account number: including Yoosee app software account number that registered and the mobile number or email that you registered change the password :enter the new password and old password, also can change the login password that setted before Section 2 System Setting Yoosee software system default...
Page 40: Section 3 Version Update
and ring setting etc Section 3 Version update hit "version update checking",view the Yoosee current version and update the newest version Section 4 System Notification the items is the Yoosee APP System Notification Section 5 About hit "about"button to view description about Yoose 37 ...
Page 41 Section 6 Log Out hit"logout"button to quite currentloginedyooseeacc oun umber. you could login or enter the registered acc ount number and password to login again Section 7 Quited hit"quite"button and exit YooseeAPP,and also can hit Yoosee APP icon then log in again Chapter6 FAQ 1.why is the network can notcontect unsuccessfully?
Page 42 if energize,also try to check by other different ways 2.device is off line or network anomaly? Answer :Reflashrefresh,app will reload when slide from up to down by hand, it is broken network, Power outage,camera Crash if still off line, and need to check the Circuit: pull out and plug in the plower plus! if can not restore network, please pull out the sd card after Power outage,andconntect the power well again ,if also can not r...
Page 43 5.how to do if forget the password？ Answer： suggest to hit the reset key to reset factory settings， and connect network and set the password again Chapter7 More 36 please update system software in time， it can check and update automatically 40 ...
Page 44: Fcc Statement
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 45 This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment.

Haier WSC-580W User Manual

Chapter 1 Product Description

Chapter 2 The Product Installation

Chapter 3 Product Features

Chapter 4 Camera Basic Features

Chapter 5Yoosee APP System Setting Features

Quick Links

Summary of Contents for Haier WSC-580W

Table of Contents