Siemens HiPath HG 1500 Service Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Gateway
  5. HiPath HG 1500
  6. Service manual
Siemens HiPath HG 1500 Service Manual

Siemens HiPath HG 1500 Service Manual

Hicom 150 h; v 1.0
Hide thumbs Also See for HiPath HG 1500:
Table of Contents

Quick Links

Hicom 150 H
HiPath HG 1500
V 1.0
Service Manual
A31003-K5020-S100-4-7620
Table of Contents
loading

Related Manuals for Siemens HiPath HG 1500

Summary of Contents for Siemens HiPath HG 1500

  • Page 1 Hicom 150 H HiPath HG 1500 V 1.0 Service Manual A31003-K5020-S100-4-7620...
  • Page 2 © Siemens AG 2000. All rights reserved. Issued by the Information and Communication Networks Group Subject to availability. Right of modfication reserved. Hofmannstrasse 51, D-81359 Munich Siemens Aktiengesellschaft Reference no.: A31003-K5020-S100-4-7620 Printed in the Federal Republic of Germany.
  • Page 3 Introduction Hicom 150 H HiPath HG 1500 Installation V 1.0 Service Manual Startup Administration Additional information A31003-K5020-S100-4-7620...

  • Page 4: Table Of Contents

    1.5 Functional environment of HiPath HG 1500 ....... . 1-5...
  • Page 5 lan2detoc.fm Contents For internal use only 5 Additional information..........5-1 5.1 Integrating various network topologies .
  • Page 6 lan2delof.fm Figures For internal use only Figures Figure 2-1 HXGS interfaces (S30810-Q2931-X/X100)......2-2 Figure 2-2 HXGM interfaces (S30810-Q2930-X/X100) ..... . . 2-5 Figure 3-1 Installation for gatekeeper mode .

  • Page 7: Figures

    lan2delof.fm Figures For internal use only A31003-K5020-S100-4-7620 Service Manual...
  • Page 8 lan2delot.fm Tables For internal use only Tables Table 1-1 Starting Hicom system administration (Service) ....1-4 Table 2-1 HXGS application option/slot........2-1 Table 2-2 HXGS hardware variants.

  • Page 9: Tables

    lan2delot.fm Tables For internal use only A31003-K5020-S100-4-7620 Service Manual...

  • Page 10: Introduction

    Note that when configuring voice applications, only S30810-Q2930-X (HXGM) and S30810-Q2931-X (HXGS) boards may be used. 1.1 HiPath HG 1500 HiPath HG 1500 creates a bridge between the LAN and the ISDN network via an in- tegrated board. It is suitable for: Hicom 150 E Office as of Version 2.2 or Hicom 150 H OfficePoint/ OfficeCom/ Of-...

  • Page 11: Prerequisite

    (voice, fax, file transfer, etc.). 1.2 Short description HiPath HG 1500 is an expansion card for Hicom 150 E Office/Hicom 150 H Point/ Com/Pro. It is used to connect a “local” LAN to Hicom 150 E Office/ Hicom 150 H Point/Com/Pro systems and to link “external”...

  • Page 12: Startup

    A simple functional test can be performed directly at the customer PC or on a service PC with a network card, vCAPI driver and a CAPI-based application. APS transfer for the HiPath HG 1500 board is usually performed via the LAN using the Assistant or, in exceptional circumstances, via the V.24 interface using the Loader.

  • Page 13: Hicom Password Concept

    lan2de.c01 Introduction For internal use only Hicom password concept 1.4 Hicom password concept Table 1-1 Starting Hicom system administration (Service) Step Input Explanation Start system administration 31994 User: 31994 (default) 31994 Password: 31994 (default) Change user and/or password Confirm user and/or password Further information is contained in the Hicom 150 H Rel.

  • Page 14: Functional Environment Of Hipath Hg 1500

    Trunk access is configured in Hicom 150 E Office/Hicom 150 H Point/Com/Pro for call numbers used by HiPath HG 1500. Hicom toll restriction for outgoing seizure is per- formed based on this trunk access in the same way as for outgoing calls.
  • Page 15 Introduction For internal use only Functional environment of HiPath HG 1500 If no gatekeepers or multiconference units are being used, IP telephony can also be implemented in H.323 networks without gatekeepers. Note, however, that the connection can only be set up via the IP address in this case, so no authorizations and bandwidth control are possible.

  • Page 16: Installation

    2.1 LAN boards for Hicom OfficePoint/Com/Pro 2.1.1 HXGS Introduction The HiPath HG 1500 board HXGS connects Hicom 150 E OfficeCom/OfficePoint with the LAN environment. The board supports up to 16 B channels. Two board variants are available: HiPath HG 1500 HXGS Voice and Data (S30810-Q2931-X)
  • Page 17 HXGS interfaces (S30810-Q2931-X/X100) A twisted-pair cable is used as the transmission medium for 10/100 Base-T”. The cable is connected to the HiPath HG 1500 board HXGS (OfficeCom and OfficePoint) via the 8-pin Western socket (X3) located on the MDF-side of the circuit board, see Figure 2-1 .

  • Page 18: Table 2-3 10/100 Baset Interface Contact Assignment

    Transmit: - wire Receive: + wire Receive: - wire 4+5+7+8 not used Note Direct Ethernet twisted-pair connection to HiPath HG 1500 The RJ45 cable must be crossed as follows: 1 <> 3 2 <> 6 3 <> 1 6 <> 2...

  • Page 19: Hxgm

    LAN boards for Hicom OfficePoint/Com/Pro 2.1.2 HXGM Introduction The HiPath HG 1500 board HXGM connects Hicom 150 E OfficePro with the LAN en- vironment. The board supports up to 16 B channels. Two board variants are available: HiPath HG 1500 HXGM Voice and Data (S30810-Q2930-X)
  • Page 20 lan2de.c02 Installation For internal use only LAN boards for Hicom OfficePoint/Com/Pro Interfaces/connectors X2: 6-pin shielded MiniDin socket for V.24 cable see Section 2.1.3 The board is connected to the system via the backplane. An adapter for the back- plane (part number C39228-A7195-A10) is used to connect the LAN with an RJ45 connector.
  • Page 21 Transmit: - wire Receive: + wire Receive: - wire 4+5+7+8 not used Note Direct Ethernet twisted-pair connection to HiPath HG 1500 The RJ45 cable must be crossed as follows: 1 <> 3 2 <> 6 3 <> 1 6 <> 2...

  • Page 22: Interface

    Connection to the V.24 interface is via the Serial Interface Cable (SIC: S30122- X5468-X) that is adapted to HiPath HG 1500 using a 6-pin MiniDin socket. The SIC performs the electrically isolated level conversion from TTL (LAN) to V.24 (PC). The other side of the SIC consists of a 9-pin SUB-D socket for direct connection to a PC.

  • Page 23: Part Numbers

    HiPath HG 1500 S30810-Q2930-X100 HXGM Data only with SW HiPath HG 1500 S30810-Q2931-X100 S30810-Q2931-X100 -- HXGS Voice and Data with HiPath HG 1500 S30810-Q2930-X100 HXGM Voice and Data with Assistant HiPath HG 1500 P30300-P1562-A1 P30300-P1562-A1 P30300-P1562-A1 Loader P30300-P1509-* P30300-P1509-* P30300-P1509-* CSTA converter...

  • Page 24: Hipath Hg 1500 Installation

    Installation For internal use only HiPath HG 1500 installation 2.3 HiPath HG 1500 installation 2.3.1 Installation requirements Free slot for boards Hicom 150 E Office as of SW Version 2.2 ISDN trunk connection LAN connection See also Table 2-1 and Table 2-4 2.3.2 Slot...

  • Page 25: Installation Procedure

    Installation For internal use only HiPath HG 1500 installation 2.3.3 Installation procedure Step Task Remove the power plug. Insert the board. Insert the power plug. Table 2-9 Installation procedure for OfficePoint/Com This sequence must be observed in order to guarantee successful LAN board login.

  • Page 26: Startup

    Configure the IP address of the PC (10.144.233.64) in the network environment. Configure the gateway (10.144.233.63). From the DOS command window, ping the HiPath HG 1500 (IP 10.144.233.63). Generate an empty customer database and load to HiPath HG 1500. Save and administer customer data. A31003-K5020-S100-4-7620 Service Manual...

  • Page 27: Initial Startup Via The Serial Interface

    Configure the IP address (1.0.0.2) of the PC (SLIP) From the DOS command window, ping the HiPath HG 1500 (IP 10.144.233.63). Generate an empty customer database and load to HiPath HG 1500. Save and administer customer data. A31003-K5020-S100-4-7620 Service Manual...

  • Page 28: Preparing A Win95 Pc

    IP address using 1.0.0.2 as the default gateway in the remote network Install Assistant HiPath HG 1500. Under Options > Administratable HiPath HG 1500 Cards > HiPath HG 1500 Cards, enter a name and an IP address. A31003-K5020-S100-4-7620...

  • Page 29: Preparing A Win98 Pc

    IP address using 1.0.0.2 as the default gateway in the remote network Install Assistant. Under Options > Administratable HiPath HG 1500 Cards > HiPath HG 1500 Cards, enter a name and an IP address. A31003-K5020-S100-4-7620 Service Manual...

  • Page 30: Preparing A Win Nt Pc

    TCP/IP settings: IP address: 1.0.0.2 > OK Under Security: Under Security: Select any authentication (including uncoded) Install Assistant Under Options > Administratable HiPath HG 1500 cards > Administratable HiPath HG 1500 cards, > New (Ins), enter a name and an IP address A31003-K5020-S100-4-7620 Service Manual...

  • Page 31: Configuration For Gatekeeper Mode

    The following stations must be differentiated from the user´s viewpoint: Group 1: stations directly connected to the HICOM (Optisets, NoFe, CMI, ...), stations registered at HiPath HG 1500 (C55 Opti clients, VCAPI clients) and all trunk accesses. Group 2: stations registered at the gatekeeper (H.323 standard clients such as Netmeeting 3.01, HiNet LP5100, HiNet TA1100, etc.).

  • Page 32: Configuring Hipath Hg 1500 (Hlb2)

    Startup For internal use only Configuration for gatekeeper mode 3.2.1 Configuring HiPath HG 1500 (HLB2) Step Task Under Voice Clients -> Gatekeeper: Enter the IP address of the PC with the gatekeeper, enable gatekeeper support and configure the prefix.
  • Page 33 lan2de.c03 Startup For internal use only Configuration for gatekeeper mode Configuring services Step Task Press the Services button and then click Add. Under Description, enter a description for the service, e.g. “Hicom 150 E”. Under Prefix, enter the correct code, which must match the gateway prefix set up in the HLB2, e.g.

  • Page 34: Administration

    For internal use only Tracing with development trace 4 Administration Information on status diagnostics for HiPath HG 1500 such as DSS, PPP, Firewall, HFA client, H.323, VCAPI, etc. is contained in the HiPath HG 1500 Administrator Manual under “Customer trace”.
  • Page 35 lan2de.c04 Administration For internal use only Determining the firmware version of the board A31003-K5020-S100-4-7620 Service Manual...

  • Page 36: Additional Information

    5 Additional information 5.1 Integrating various network topologies HiPath HG 1500 is equipped with a 10/100 MB Autosense twisted-pair port. 5.1.1 Star topology with hub (10/100 BaseT) In this network topology, a hub or switch is used as a central element. Each data terminal is connected to this via a separate twisted-pair cable (e.g.
  • Page 37 However, because of the risk associated with failures and the limited load-bearing capacity of the network, structured (star) cabling is becoming increasingly popular. The integrated HiPath HG 1500 can only be connected via a hub or switch.

  • Page 38: Updating Sw

    Additional information For internal use only Updating SW 5.2 Updating SW Upgrading from HiPath HG 1500 Rel. 1.0 to Rel. 1.1 is performed via APS transfer. A31003-K5020-S100-4-7620 Service Manual...
  • Page 39 lan2de.c05 Additional information For internal use only Updating SW A31003-K5020-S100-4-7620 Service Manual...
  • Page 40 Gatekeeper Global System for Mobile Communication H.323 ITU standard for voice over LAN Hicom Feature Access HLB2 HiPath HG 1500 Rel. 1.1 (HXGM/HXGS) HXGM Hicom Xpress Gateway Medium HXGS Hicom Xpress Gateway Small IEEE Institute of Electrical and Electronics Engineers...
  • Page 41 lan2de.abb For internal use only Media Access Control Main Distribution Frame MODEM Modulator/Demodulator Multiple Subscriber Number Network Address Translation NoFe a/b telephone (analog telephone) Password Authentication Protocol PING Packet Internet Groper Point-to-Point Protocol Remote Access Service Serial Interface Cable Subscriber Line Analog (Hicom board) SLIP Serial Line Interface Protocol Subscriber Line UP0/E (Hicom board)

  • Page 42: Index

    lan2deix.fm Index For internal use only Index Add modem 3-3, 3-4 Administration 4-1 Bus topology (10 Base2) 5-1 Configuring HG 1500 (HLB2) 3-7 Configuring the NGK 100 gatekeeper 3-7 Dial-Up Networking Connection to Hicom 150 E Office 3-3, 3-4, 3-5 Firmware version of board determining 4-1 Gatekeeper 1-5...
  • Page 43 lan2deix.fm Index For internal use only Integrating various network topologies 5-1 Interface LAN 2-7 V.24 2-7 LAN boards for Hicom OfficePoint/Com/Pro 2-1 Least Cost Routing (LCR) 1-5 Part numbers 2-8 Service information 1-2 Short description 1-2 Slot 2-9 Star topology with hub (10/100 BaseT) 5-1 Starting Hicom system administration (Service) 1-4 Startup 3-1 Toll restriction 1-5...

Table of Contents