Connecting To A Wired (Ethernet) Network - Sharp AQUOS User Manual

ENGLISH

FRANÇAIS

You can attach your TV to your LAN in one of the three following ways:

Option 1

You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a

Cat 5 LAN cable. See the illustration below.

TV PORT

LAN

Option 2

You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an IP Sharer which is

connected to an external modem. Use an Ethernet cable for the connection. See the illustration below.

TV PORT

LAN

Ethernet Cable

Option 3

Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN

port on the back of your TV directly to a network wall outlet with an Ethernet cable. See the diagram below.

TV PORT

If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration

Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway,

and DNS, so you don't have to enter them manually. Most home networks are Dynamic Networks.

Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address,

subnet mask, gateway, and DNS values manually on your TV's Cable Setup Screen when you set up the network

connection. To get the IP address, subnet mask, gateway and DNS values, contact your Internet Service Provider (ISP).

NOTE

• You can use ADSL modems that support DHCP if your network requires a static IP address. ADSL modems that

support DHCP also let you use static IP addresses.

ESPAÑOL

External Modem

(ADSL / VDSL / Cable TV)

Ethernet Cable

IP Sharer (Router)

(with DHCP server)

Ethernet Cable

LAN

Ethernet Cable

The Modem Port on the Wall

Modem Cable

External Modem

(ADSL / VDSL / Cable TV)

Modem Cable

The LAN Port on the Wall

10

The Modem Port on the Wall