Dell 114-0922 Installation Instructions

All-in-one for dell optiplex sff

Quick Links

Patent(s) Pending
All-In-One for
Dell OptiPlex SFF
Installation Instructions
Kit P/N: 114-0922 (with cover)
114-1548 (without cover)
loading

Summary of Contents for Dell 114-0922

  • Page 1 Patent(s) Pending All-In-One for Dell OptiPlex SFF Installation Instructions Kit P/N: 114-0922 (with cover) 114-1548 (without cover)
  • Page 2: Kit Contents

    If your monitor does not attach or you are using a VESA monitor continue to Step 2b. Step 2b Dell Monitor Bracket Removal: If you are using the VESA Monitor Bracket, you will need to remove the Dell Monitor Bracket by loosening the Thumb Screw and pivot the bracket away from stand.
  • Page 3 Installation Instructions Step 3. VESA Monitor Bracket Attachment: Turn the monitor face down on a large flat surface. Locate the four VESA mounting holes on the rear of the monitor. a. Determine if spacers are required: Some monitors have a "recess" on the rear of the monitor.
  • Page 4 Installation Instructions Step 4 Monitor to Stand Installation: Slide the monitor with the VESA Monitor Plate down over the top two Tabs on the Stand. Tighten the Thumb Screw from step 2. Tabs Monitor Monitor Stand Thumb Screw Pivot Bracket Warranty Statement Innovation First, Inc.

This manual is also suitable for:

114-1548