Philips DVDR9000H/10 Quick Start Manual
Hdd & dvd player / recorder
Hide thumbs
Also See for DVDR9000H/10:
- User manual (99 pages) ,
- Service instructions manual (15 pages) ,
- Service manual (240 pages)
Quick Links
See also:
Service Manual, User Manual
1
Connect
Start with the 'Basic connection'.
If you have a VCR, follow the instructions for 'Connection with VCR or similar device'.
If you have a set-top box, follow the instructions for 'Connection with set-top box'.
Basic Connection
A
Before Connecting
Unplug the antenna cable that is currently connected to
your TV.
If you have only a single off-air antenna, follow 'B1'
connection.
If you have both the off-air antenna and digital terrestrial
antenna, follow 'B2' connection.
Connecting (with digital terrestrial
B2
Connecting
antenna)
B1
Television ( rear)
Television (rear)
From an off-air
antenna or cable box
Philips Recorder (rear)
A
A
Disconnect the antenna cable from your TV and
Disconnect the antenna cable from your TV and
connect it to the ANTENNA
socket on this
connect it to the
recorder.
B
Connect the indoor DVB-T antenna cable to the
B
Use the supplied RF coaxial cable to connect the TV
ANTENNA
socket on this recorder to the Antenna In socket
B
Use the supplied RF coaxial cable to connect the
on the TV.
TV
socket on this recorder to the Antenna In
C
Use the supplied Tuner interlink cable to connect
socket on the TV.
the two 'A'-sockets on this recorder.
D
Use the supplied scart cable to connect the
D
Use the supplied scart cable to connect the
EXT1 TO TV-I/O scart socket on this recorder to
EXT1 TO TV-I/O scart socket on this recorder to
the SCART IN socket on your TV.
the SCART IN socket on your TV.
E
Plug in the power cable from the recorder to an AC
E
Plug in the power cable from the recorder to an AC
power outlet
power outlet
Note See the accompanying user manual for other possible connections (e.g. HDMI, Component Video)
dvdr9000h_eu_eng_19341.indd 1
dvdr9000h_eu_eng_19341.indd 1
Connection with VCR or
similar device
A
Before Connecting
Your new Philips Recorder replaces the VCR for your
recording needs. First, unplug all the connections from
your VCR.
B
Connecting
Television ( rear)
From an off-air
antenna or cable box
From an off-air
antenna or cable box
From digital
terrestrial
antenna
Philips Recorder
(rear)
Philips Recorder (rear)
VCR or similar
device (rear)
socket on this recorder.
socket on this recorder.
A
Follow step 1 to 5 of 'Basic connection' to connect
this recorder before you proceed to step 2 below.
Above illustration shown the connection without
the digital terrestrial antenna.
B
Use another scart cable (not supplied) to connect
the EXT2 AUX-I/O scart socket on this recorder to
the SCART OUT socket on your VCR.
C
Connect the power cable from the VCR to an AC
power outlet.
Note In this setup, the VCR cannot record TV
programmes.
2
Connection with set-top box
A
Finding the viewing channel
A
Presss STANDBY-ON on the recorder.
Your new Philips Recorder provides a G-LINK
The recorder will display 'IS TV ON?'.
transmitter which allows you to control the tuner of the
set-top box (satellite receiver, cable TV box) through
B
Switch on the TV.
the GUIDE Plus+ system. You can record the TV
You should see the { EASY SETUP } menu.
programmes that are received through the set-top box.
Connecting
Note If connected to your VCR, make sure it is
turned off before proceeding.
Television ( rear)
C
If not, press the Channel Down button on the TV's
remote control repeatedly (or AV, SELECT button)
until you see the menu. This is the correct viewing
channel for the recorder.
B
Start basic setup
Use the recorder's remote control and follow the on-
screen instructions to complete the installation.
A
Select the desired menu language, your country and
the TV shape.
Note Select { Done } in the menu and press
to the next screen.
B
Activate automatic channel search for analogue and
digital tuner/radio.
To source
C
Set-Top Box (rear)
Check the date and time and press
Positioning of G-LINK
D
To continue with the GUIDE Plus+ installation,
transmitter
select { Continue } and press
Otherwise, select { Do not install now } and press
Set-top box
. Wait until the recorder has finished initialising
the system, then press
G-LINK transmitter
C
Install the GUIDE Plus+ system
A
Follow step 1 to 5 of 'Basic connection' to connect
this recorder before you proceed to step 2 below.
Above illustration shown the connection without
the digital terrestrial antenna.
B
Connect the supplied G-LINK cable to the G-LINK
socket on this recorder.
A
Follow the on-screen instructions to select your
C
Place the G-LINK transmitter in front of your set-
language, country and enter the postal code of your
top box in such a way that it can acquire the signal
area.
broadcasted by the transmitter.
Note If no or wrong postal code is entered, it will
D
Connect the power cable from the set-top box to
cause no GUIDE Plus+ (EPG) service information.
an AC power cable.
Set up
D
Install the set-top box
If you do not have a set-top box, skip 'D' and go to 'E'.
A
Press
down to select 'External Receiver 1' and
press
.
B
Press
again to continue.
C
Select the type of reception, service provider and
brand name of the connected set-top box.
Note Press
to go to the next screen. Select
{ None } if none of the entries are applicable.
D
Select the recorder socket through which your set-
top box is connected (e.g. 'EXT2' for EXT2 AUX-I/O
socket) and press
.
E
Turn on your set-top box and select channel
number 02 on the set-top box.
F
Read the instructions on the TV and press
Setup External Receiver 1
Has the External Receiver 1 changed to
Programme Number 101?
G
If the set-top box has switched to the same
to go
programme number as displayed on the TV, select
{ Yes } in the menu and press
.
Note If not, select { No } and press
different code.
.
H
Your set-top box is now installed. Press the green
button to exit.
.
Note To switch the GUIDE Plus+ system's host
channel manually, go to { Host Channel Setup }.
again.
E
Load the TV listing data
A
Press GUIDE
to exit GUIDE Plus+ system.
GUIDE
Leave the recorder in 'standby' mode and turn 'on'
the set-top box overnight to collect the TV listing
data, this may take up to 24 hours.
Note If you tune to your Host Channel before going
to 'standby' mode, this recorder will start downloading
the TV listings data immediately.
B
Check the { Editor } screen the next day to ensure
the source and programme numbers are matching
for all channels.
.
to try a
2005-11-15 11:20:12 AM
2005-11-15 11:20:12 AM
Related Manuals for Philips DVDR9000H/10
Summary of Contents for Philips DVDR9000H/10
- Page 1 (satellite receiver, cable TV box) through Before Connecting the GUIDE Plus+ system. You can record the TV Your new Philips Recorder replaces the VCR for your programmes that are received through the set-top box. recording needs. First, unplug all the connections from your VCR.
-
Page 2: Quick Start Guide
PLAY to start playback. Need help? GUIDE Plus+ system Go to www.europe.guideplus.com User Manual See the user manual that came with your Philips Recorder Online Go to www.philips.com/support 2005 © Koninklijke Philips N.V. All rights reserved. 12 NC 3139 246 19341 www.philips.com...