Table of Contents
Cleaning and Storage
Removal from Storage
1. Check the battery electrolyte level and charge the battery if
necessary. Install it in the vehicle. Make sure the battery vent hose is
routed properly and that it's not pinched or restricted in any way.
2. Make sure the spark plug is tight.
3. Fill the fuel tank with fuel.
4. Check all the points listed in the Daily Pre-Ride Inspection section
on page 38. Tightness of the bolts, nuts and other fasteners should
be checked by an authorized POLARIS dealer or other qualified
service facility.
5. Lubricate at the intervals outlined in the Periodic Maintenance
Chart beginning on page 53.
Transporting the Vehicle
Follow these procedures when
transporting the vehicle.
1. Place the transmission in neutral. Set
the parking brake.
2. Stop the engine.
3. Remove the key to prevent loss
during transporting.
4. Secure the fuel cap and seats. Ensure
that the seats are attached correctly
and are not loose.
NOTICE: Always tie the frame of the
POLARIS vehicle to the
transporting unit securely with
suitable straps or rope. Do not
attach tie straps to the front control
arm bolt pockets.
5. Wrap the front tie strap through the
frame tubes, or attach a tie-down
hook around each of the tubes.
6. Wrap the rear tie strap around the
swing arm.
MAINTENANCE
Step 5
Step 5
Step 6
Tubes
91
Hide quick links:
Table of Contents
