ABB COM600 series User Manual
  1. Manuals
  2. Brands
  3. ABB Manuals
  4. Server
  5. COM600 series
  6. User manual
ABB COM600 series User Manual

ABB COM600 series User Manual

External opc server
Hide thumbs Also See for COM600 series:
Table of Contents

Quick Links

See also: Configuration Manual, User Manual
COM600 series, Version 4.1
External OPC Server User's Manual
Table of Contents
loading

Related Manuals for ABB COM600 series

Summary of Contents for ABB COM600 series

  • Page 1 COM600 series, Version 4.1 External OPC Server User's Manual...

  • Page 3: Table Of Contents

    1.9. Abbreviations ................. 9 1.10. Related documents ..............11 1.11. Document revisions ..............11 Introduction ................... 12 2.1. General about the COM600 series ..........12 2.2. Functional overview ..............12 2.3. External OPC Server features ............. 14 Configuration ..................15 3.1.
  • Page 4 COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual 3.5.7.4. Controllable single point (SPC) for OPC internal data ..........28 3.5.8. Configuring data objects for External OPC Client ..29 3.5.8.1. General about configuring data objects for External OPC Device ......... 29 3.5.8.2.

  • Page 5: About This Manual

    Copyright This document and parts thereof must not be reproduced or copied without written per- mission from ABB, and the contents thereof must not be imparted to a third party, nor used for any unauthorized purpose. The software or hardware described in this document is furnished under a license and may be used, copied, or disclosed only in accordance with the terms of such license.

  • Page 6: Conformity

    (EMC Directive 2004/108/EC) and concerning electrical equipment for use within specified voltage limits (Low-voltage directive 2006/95/EC). This conformity is the result of tests conducted by ABB in accordance with the product standards EN 50263 and EN 60255-26 for the EMC directive, and with the product standards EN 60255-1 and EN 60255-27 for the low voltage directive.

  • Page 7: Document Conventions

    1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Operation This section covers the basic operation procedures you can carry out when transferring or activating Grid Automation Controller COM600 (later referred to as COM600) with new configurations. 1.6. Document conventions The following conventions are used for the presentation of material: •...

  • Page 8: Terminology

    COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual The electrical warning icon indicates the presence of a hazard which could result in electrical shock. The warning icon indicates the presence of a hazard which could result in personal injury.

  • Page 9: Abbreviations

    A communication protocol developed by Echelon. LON Application Guideline for A proprietary method of ABB on top of the standard LON pro- substation automation; LAG tocol. Series of standards specifications aiming at open connectivity in industrial automation and the enterprise systems that support industry.
  • Page 10 LON Application Guideline for substation automation Local Area Network Logical Device LonMark interoperable device communicating in LonWorks network. In this document, the term is used for devices that do not support the ABB LON/LAG communication. Logical Node LON SPA Gateway...

  • Page 11: Related Documents

    1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual 1.10. Related documents Name of the manual MRS number COM600 User's manual 1MRS756125 1.11. Document revisions Document version/date Product revision History A/30.6.2011 Document created B/31.5.2012 Document revised C/13.3.2015 Document revised...

  • Page 12: Introduction

    2.1. General about the COM600 series The COM600 series comprises of substation management units that are deployed together with protection and control relays and other communication devices, such as Relion protection and control relays and Remote I/O units, to realize smart substation and grid automation solutions in utility and industrial medium voltage distribution networks.
  • Page 13 1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual overview.jpg Figure 2.2-1 System overview 1. Station Automation Builder 600 (SAB600) 2. COM600 3. NCC (Network Control Center) 4. 3rd party system with an OPC DA Server 5. Protection and control devices The External OPC Server is intended for connecting external systems to the COM600 device with OPC.

  • Page 14: External Opc Server Features

    COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual Configured devices and data modeled according to the IEC 61850 model are then exposed to OPC clients through a Data Access (DA) server. 2.3. External OPC Server features The External OPC Server supports the following features: •...

  • Page 15: Configuration

    1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Configuration 3.1. About this section This section guides you in the configuration tasks required before you can start using the External OPC Server. For information on the IEC 61850 data modeling, refer to COM600 User's Manual.
  • Page 16 COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual Example_view_External_OPC.png Figure 3.2-1 Example view of SAB600 The configuration work can basically be divided into two separate tasks: 1. building an object tree, and 2. configuring object properties. For information on how to enable configuring of OPC item paths in the data objects with SAB600 with the OPC Browser tool, see 3.4, OPC Browser tool.

  • Page 17: Building Object Tree

    1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Object Description External OPC Subnetwork Object representing a physical subnetwork. External OPC IED The IED object presents a physical device in the 3rd party system. External OPC Logical Device (LD) An object representing a group of functions.

  • Page 18: Adding Gateway Object

    COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual 3.3.2. Adding Gateway object To start building the object tree, add a Gateway object in the Communication structure by selecting the project name, right-click it and select New > Communication > Gate- way.

  • Page 19: Adding Logical Device Objects

    1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual 4. Select the device to import from the drop-down list. You can preview the configur- ation on the right. 5. Click Import. The new preconfigured objects appear in the object tree. If the configuration file is large, the import may take time.
  • Page 20 COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual namespace information can be later used to configure the OPC item paths in the data objects with SAB600. 1. Copy the OPC Browser tool to the computer, where the OPC Server is running. The OPC Browser software can be found from the Utilities folder of the installation DVD.
  • Page 21 1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Ini_import Figure 3.4-3 External OPC Server Ini Import tool 6. Click Select File in the External OPC Server Ini Import tool to select the file created with the OPC Browser.
  • Page 22 COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual Control_OPC_item_path_properties Figure 3.4-4 Control OPC Item Path properties 9. A new dialog showing the namespace created with the OPC Browser opens, see Figure 3.4-5. Select the correct OPC item from the tree view and click OK. The path of the selected OPC item will be updated to the property.

  • Page 23: Configuring Objects

    1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual 3.5. Configuring objects 3.5.1. General about configuring objects After the objects have been added, configure the object properties. Figure 3.5.1-1 shows an example of how to use SAB600 to configure the object properties for External OPC Server.

  • Page 24: Configuring External Opc Server Properties

    COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual 3.5.2. Configuring External OPC Server properties Table 3.5.2-1 External OPC Server properties Property/Parameter Value or Value range/Default Description Source OPC Server ProgID Defines the ProgID of the mapped server. Remote Node Name...

  • Page 25: Configuring Logical Device Properties

    1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Name Value or Value range/ Default Description Station/Remote OPC path of the station remote switch Switch OPC Path position to be used with this logical device. The format is Node#ProgID For OPC...

  • Page 26: Configuring Data Objects For Internal Opc Data

    COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual Property/Parameter Value or Value range/ Default Description Logical Node Class ANCR, ARCO, ATCC, AVCO, Logical node class LPHD, CALH, CCGR, CILO, CPOW, CSWI, GAPC, GGIO, GSAL, IARC, IHMI, ITCI, ITMI,...

  • Page 27: Integer Status (Ins)

    1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual 3.5.7.2. Integer status (INS) Table 3.5.7.2-1 Property/Para- Value or Value range/ Default Description meter Basic Common Data Common data class according to IEC Class 61850 Addresses Item Tag Path Default: None Item tag path for the internal status information.

  • Page 28: Controllable Single Point (Spc) For Opc Internal Data

    COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter Item Tag Path Item tag path for the internal status information. The internal server tags that can be used are located in the Attributes nodes that are located under the root, line, and IED nodes.

  • Page 29: Configuring Data Objects For External Opc Client

    1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual 3.5.8. Configuring data objects for External OPC Client 3.5.8.1. General about configuring data objects for External OPC Device Use the OPC Browser tool to configure the OPC item paths in the data objects with SAB600. For more information, see 3.4, OPC Browser tool.
  • Page 30 COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Update Rate 0 to 65535 Defines the requested shortest interval in milliseconds at which the source OPC Default: 0 server should report that an OPC item’s value has changed.
  • Page 31 1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example General Bitmask BITMASK_OR Defines the type if used bitmask for Gen- Type eral BITMASK_AND BITMASK_XOR BITMASK_BOOL_ALL BITMASK_BOOL_NONE BITMASK_BOOL_ANY BITMASK_BOOL_ANYNOT- BITMASK_BOOL_SOMENOT- BITMASK_BOOL_ONLY...
  • Page 32 COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Phase A Bitmask 0 to 65535 Bitmask for phase A Default: 0 Phase A Bitmask BITMASK_OR Defines the type of bitmask used for Phase...

  • Page 33: Protection Activation Information (Act)

    1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Phase B OPC Item OPC item path for phase B Path Phase C Bitmask 0 to 65535 Bitmask for phase C...
  • Page 34 COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example General OPC Item OPC item path for general phase Path Neutral OPC Item OPC item path for neutral phase Path Phase A OPC Item...
  • Page 35 1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example General OPC Item OPC item path for general phase Path Neutral Bitmask 0 to 65535 Bitmask for neutral Default: 0 Neutral Bitmask...
  • Page 36 COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Phase A Bitmask BITMASK_OR Defines the type of bitmask used for Phase Type BITMASK_AND BITMASK_XOR BITMASK_BOOL_ALL BITMASK_BOOL_NONE BITMASK_BOOL_ANY BITMASK_BOOL_ANYNOT- BITMASK_BOOL_SOMENOT- BITMASK_BOOL_ONLY...

  • Page 37: Analogue Set Point (Apc)

    1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Phase C Bitmask 0 to 65535 Bitmask for phase C Default: 0 Phase C Bitmask BITMASK_OR Defines the type of used bitmask for Phase...

  • Page 38: Binary Counter Reading (Bcr)

    COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Input Scale Lookup Table Scale Scale for input signal Stepwise Linear Scale Default: None 3.5.8.5. Binary counter reading (BCR) Table 3.5.8.5-1 Configurable BCR properties for External OPC clients...
  • Page 39 1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Subtype Basic Object subtype Update Rate 0 to 65535 Defines the requested shortest interval in milliseconds at which the source OPC Default: 0 server should report that an OPC item’s...

  • Page 40: Complex Measured Value (Cmv)

    COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Lower Control Scale Lookup Table Scale Scale for lower control Stepwise Linear Scale Default: None Scale Lookup Table Scale Scale for indication signal...
  • Page 41 1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Scale Ang Lookup Table Scale Scale for angle Stepwise Linear Scale Default: None Scale Mag Lookup Table Scale Scale for magnitude...
  • Page 42 COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual Table 3.5.8.7-2 Configurable CMV properties for External OPC clients, subtype LIMIT_CHECK Property/Para- Value or Value range/ Default Description meter /Example Basic 61850-Type 61850-Type Angle OPC Item OPC item path for angle...
  • Page 43 1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Unit meter, kilogram, second, Unit for measurement ampere, kelvin, mole, candela, degrees, radian, steradian, gray (J/Kg), becquerel (l/s), degrees Celsius), sievert...

  • Page 44: Delta (Del)

    COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual 3.5.8.8. Delta (DEL) Table 3.5.8.8-1 Configurable DEL properties for External OPC clients, subtype Basic Property/Para- Value or Value range/ Default Description meter /Example Basic 61850-Type 61850-Type V ab Angle OPC...
  • Page 45 1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Unit meter, kilogram, second, Unit for measurement ampere, kelvin, mole, candela, degrees, radian, steradian, gray (J/Kg), becquerel (l/s), degrees Celsius), sievert...
  • Page 46 COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example V ab Magnitude OPC item path for ab V magnitude OPC Item Path V bc Angle OPC OPC item path for bc V angle...
  • Page 47 1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Unit meter, kilogram, second, Unit for measurement ampere, kelvin, mole, candela, degrees, radian, steradian, gray (J/Kg), becquerel (l/s), degrees Celsius), sievert...

  • Page 48: Controllable Double Point (Dpc)

    COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual 3.5.8.9. Controllable double point (DPC) Table 3.5.8.9-1 Configurable DPC properties for External OPC Clients, subtype Basic Property/Para- Value or Value range/ Default Description meter /Example Basic 61850-Type 61850-Type Cancel OPC Item...
  • Page 49 1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Open Execute Scale Lookup Table Scale Scale for open execute Stepwise Linear Scale Default: None Open Select Scale Lookup Table Scale...

  • Page 50: Device Name Plate (Dpl)

    COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Update Rate 0 to 65535 Defines the requested shortest interval in milliseconds at which the source OPC Default: 0 server should report that an OPC item’s value has changed.

  • Page 51: Double Point Status (Dps)

    1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example 61850-Type 61850-Type HW Revision OPC OPC item path for HW revision Item Path Location OPC Item OPC item path for location...

  • Page 52: Controllable Integer Status (Inc)

    COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual Table 3.5.8.11-2 Configurable DPS properties for External OPC clients, subtype OPEN_CLOSED_ITEMS Property/Para- Value or Value range/ Default Description meter /Example Basic 61850-Type 61850-Type Closed OPC Item OPC item path for closed...

  • Page 53: Integer Status (Ins)

    1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Scale and Unit Control Scale Lookup Table Scale Scale for control signal Stepwise Linear Scale Default: None Scale Lookup Table Scale...

  • Page 54: Logical Node Name Plate (Lpl)

    COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Control OPC Item OPC item path for control Path State OPC Item OPC item path for state Path Sub Type Basic...

  • Page 55: Measured Value (Mv)

    1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual 3.5.8.16. Measured value (MV) Table 3.5.8.16-1 Configurable MV properties for External OPC clients, subtype Basic Property/Para- Value or Value range/ Default Description meter /Example Basic 61850-Type 61850-Type Magnitude OPC OPC item path for magnitude...
  • Page 56 COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Unit meter, kilogram, second, Unit for measurement ampere, kelvin, mole, candela, degrees, radian, steradian, gray (J/Kg), becquerel (l/s), degrees Celsius), sievert...
  • Page 57 1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Sub Type LIMIT_CHECK Object subtype Update Rate 0 to 65535 Defines the requested shortest interval in milliseconds at which the source OPC Default: 0 server should report that an OPC item’s...
  • Page 58 COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Unit meter, kilogram, second, Unit for measurement ampere, kelvin, mole, candela, degrees, radian, steradian, gray (J/Kg), becquerel (l/s), degrees Celsius), sievert...

  • Page 59: Controllable Single Point (Spc)

    1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual 3.5.8.17. Controllable single point (SPC) Table 3.5.8.17-1 Configurable SPC properties for External OPC clients, subtype Basic Property/Para- Value or Value range/ Default Description meter /Example Basic 61850-Type 61850-Type Control OPC Item...

  • Page 60: Single Point Status (Sps)

    COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Update Rate 0 to 65535 Defines the requested shortest interval in milliseconds at which the source OPC Default: 0 server should report that an OPC item’s value has changed.
  • Page 61 1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example 61850-Type 61850-Type Bitmask Type BITMASK_OR Defines the type of used bitmask BITMASK_AND BITMASK_XOR BITMASK_BOOL_ALL BITMASK_BOOL_NONE BITMASK_BOOL_ANY BITMASK_BOOL_ANYNOT- BITMASK_BOOL_SOMENOT- BITMASK_BOOL_ONLY BITMASK_BOOL_EXACTLY Default: BITMASK_OR...

  • Page 62: Wye

    COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual 3.5.8.19. Table 3.5.8.19-1 Configurable WYE properties for External OPC clients, subtype Basic Property/Para- Value or Value range/ Default Description meter /Example Basic 61850-Type 61850-Type I a Angle OPC Item OPC item path for a I angle...
  • Page 63 1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Net Multiplier yocto, zepto, atto, femto, pico, Multiplier for net nano, micro, milli, centi, deci, deka, hecto, kilo, mega, giga, tera, peta, exa, zetta, yotta...
  • Page 64 COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Net Unit dimensioless, meter, kilogram, Unit for net second, ampere, kelvin, mole, candela, degrees, radian, steradian, gray (J/Kg), becquerel (l/s), degrees...
  • Page 65 1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Neutral Scale Mag Lookup Table Scale Scale for neutral magnitude Stepwise Linear Scale Default: None Neutral Unit See Net Unit Unit for neutral...
  • Page 66 COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Res Max Limit 20000 Max limit for res Res Min Limit Min limit for res Table 3.5.8.19-2 Configurable WYE properties for External OPC clients, subtype...
  • Page 67 1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Net Multiplier yocto, zepto, atto, femto, pico, Multiplier for net nano, micro, milli, centi, deci, deka, hecto, kilo, mega, giga, tera, peta, exa, zetta, yotta...
  • Page 68 COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Net Unit dimensioless, meter, kilogram, Unit for net second, ampere, kelvin, mole, candela, degrees, radian, steradian, gray (J/Kg), becquerel (l/s), degrees...
  • Page 69 1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Phase Multiplier See Net Multiplier Multiplier for phase Phase Number Of 0 to 9 Number of decimals for phase Decimals Default: 0...

  • Page 70: Configuring Dcom

    COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual Property/Para- Value or Value range/ Default Description meter /Example Neutral Max Limit 20000 Max limit for neutral Neutral Min Limit Min limit for neutral Phase Hi Limit Hi limit for phase...

  • Page 71: Configuring Dcom

    1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual component from OPC Foundation. The OpcEnum component is used for browsing OPC servers on a computer and for mapping progIds to CLSIDs. ProIds are used to configure the remote OPC server on COM600. CLSIDs are needed to start the OPC server via DCOM.

  • Page 72: Creating A Common User Account

    COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual DCOM_default_properties.png Figure 3.6.3.1-1 Configuring DCOM default properties 3.6.3.2. Creating a common user account The COM600 local user account will be used for authentication between the two com- puters. The user account is already included on the COM600 computer, thus it only needs to be created on the OPC server computer.

  • Page 73: Local Security Policy Settings

    1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Windows security policy, for example, because of too many failed login attempts. 3.6.3.3. Local security policy settings Depending on the current Windows security policy settings and Windows version, remote users may be authenticated as Guest. As a Guest, the remote user is not authorized to use OPC via DCOM unless the Guest account is given authorization (not recommended).

  • Page 74: Configuring Dcom On Com600 Computer

    COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual 3.6.4. Configuring DCOM on COM600 computer To be able receive incoming data callbacks from the OPC server to the COM600 com- puter, you must enable remote access permissions for the COM600 user account.

  • Page 75: Configuring Dcom On Opc Server Computer

    1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual COM600_permissions.png Figure 3.6.4-2 Adding permissions for COM600 computer If you want to run the remote OPC server on a different user account, you must create the additional user account on the...
  • Page 76 COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual COM600_permissions_OPC.png Figure 3.6.5-1 Adding permissions for COM600 computer 5. Click Edit Limits in the Launch and Activation Permissions section of the dialog, see Figure 3.6.4-1. 6. In the Launch and Activation Permission dialog, allow Local Launch, Remote Launch, Local Activation and Remote Activation for COM600 and click OK (see Figure 3.6.5-2).
  • Page 77 1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual launch_permission.png Figure 3.6.5-2 Adding launch and activation permissions for COM600 7. Configure the OPC server to run as the (local) COM600 user created on the computer for this purpose. Select My Computer > DCOM Config > OPC server to open the properties.
  • Page 78 COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual identity_tab.png Figure 3.6.5-3 Configuring the COM600 user to run the OPC server 9. Select the Security tab and click Edit in the Launch and Activation Permissions section of the dialog, see Figure 3.6.5-4.
  • Page 79 1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual customizing_lanuch_permissions.png Figure 3.6.5-4 Customizing launch and activation permissions 10. In the Access Permission dialog, allow Local Launch, Remote Launch, Local Activation and Remote Activation for the OpcEnum component and click OK (see...
  • Page 80 COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual allowing_launch_and_activation.png Figure 3.6.5-5 Adding launch and activation permissions for the OpcEnum component 11. Click Edit in the Access Permissions section of the dialog, see Figure 3.6.5-4. 12. In the Access Permission dialog, allow Local Access and Remote Access for the...
  • Page 81 1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual allowing_access_permissions.png Figure 3.6.5-6 Adding local and remote access permissions for the OpcEnum component...

  • Page 82: Operation

    COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual Operation 4.1. About this section This section describes the basic operation procedures you can carry out after the been configured. After this, you can, for example, monitor and control the condition of connections in network.

  • Page 83: Data Object Diagnostics

    1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Ext_Event_log_file.png Figure 4.3-2 Event log file Diagnostic AE Client Diagnostic events can be monitored and controlled using the Diagnostic AE Client function. Click Refresh to update the status information. To be able to receive events from a certain device, diagnostic events must be enabled for this respective device.

  • Page 85: Index

    1MRS757274 COM600 series, Version 4.1 External OPC Server User's Manual Index adding Data object ..................... 19 Gateway object ....................18 Logical device ....................19 Logical node ....................19 OPC Server object ..................18 configuring DCOM ...................... 70–71 DCOM default properties ................. 71 DCOM on COM600 computer ................
  • Page 86 COM600 series, Version 4.1 1MRS757274 External OPC Server User's Manual Gateway object adding ......................18 Integer status (INS) properties ....................... 27 Logical device adding ......................19 Logical Device properties ....................... 25 Logical node adding ......................19 properties ....................... 25 object configuring .....................
  • Page 88 Contact us ABB Oy Distribution Automation P.O. Box 699 FI-65101 VAASA, FINLAND Tel. +358 10 22 11 Fax. +358 10 224 1094 ABB Inc. Distribution Automation 655 Century Point Lake Mary, FL 32746, USA Tel: +1 407 732 2000 Fax: +1 407 732 2335...

Table of Contents