A/T Throttle Cable; Solenoid Valves (Shift Solenoid Valves And Tcc Solenoid Valve) - Suzuki GRAND VITARA XL-7 Owner's Manual
Hide thumbs
Also See for GRAND VITARA XL-7:
- Owner's manual (274 pages) ,
- Specifications (4 pages) ,
- Service manual (597 pages)
Table of Contents
A/T Throttle Cable
ADJUSTMENT
1) Pull inner cable (3) by force of 2 N (0.2 kg, 0.45 lb) or less to
be no slack of inner cable with A/T throttle cable (1) curved
as shown in the figure.
2) Fix stopper (2) to inner cable (3) with clearance "c".
A/T throttle cable adjusting position (clearance "c") :
0.8 – 1.5 mm (0.03 – 0.06 in.)
3) Warm up engine and transmission to normal operating tem-
perature.
4) Make sure that accelerator cable is adjusted as specified.
5) With throttle valve closed, check clearance "c", which should
be within the following specification, of A/T throttle cable (1).
If it is out of specification, adjust it by turning cable adjusting
nut (2).
A/T throttle cable adjusting position (clearance "c") :
0.8 – 1.5 mm (0.03 – 0.06 in.)
6) Tighten lock nut (3) securely.
Solenoid Valves (Shift Solenoid Valves and
TCC Solenoid Valve)
INSPECTION
With PCM couplers disconnected and using service wire as
shown in the figure, check each solenoid valve for clicking sound.
Shift solenoid valve - A (#1)
Shift solenoid valve - B (#2)
TCC (Lock-up) solenoid valve
AUTOMATIC TRANSMISSION (4 A/T) 7B1-45
C51-1-2
C51-1-1
C51-1-8
Chapters
Table of Contents
